How do I get Mac to finish start-up...it shuts off when bar loads 1/3 of the way.

During start-up, the load bar will get about 1/3 of the way, and then the computer just shuts off. I cannot get it to reboot all of the way.
Can anyone help with this???
Thanks a lot!

Hi. See if you can boot in safe mode. Hold down the  shift key at startup and release a the apple logo.  If it boots this way then shut down and try normal boot.You could also do a pram reset. Hold down Command/Option/P/R keys for three chimes at startup and continue boot. If you still have problems startup holding down option or option r to go to recovery and run disk permissions repair and disk repair. If non of this helps Spudnutty may have some other options for you.

Similar Messages

  • How can I get rid of duplicate birthdays in icloud Calendar, especially when there are no Contacts in the iCloud? Case ID: 365381395

    How can I get rid of duplicate birthdays in icloud Calendar, especially when there are no Contacts in the iCloud? Case ID: 365381395

    Found the answer myself while helping to set up iPhone.  It is simple when you know how.  Before signing out of iCloud to sign in again and restore the link to Photo Stream I had opted to copy iCloud contacts to the Mac.  When I signed in again this created two iCloud views which can be seen in Contacts Preferences.  I just disabled one of them.  Not brave enough to attempt removal but I gues this would work too.

  • How can you get your music synced from iTunes to your iPod when a window pop ups on the screen saying"The iPod "Edward's iPod" cannot be synced. An unknown error occured (13019))?

    I had 429 songs already on my iPod Touch. When I was in the process of syncing a song from my iTunes Library on to my iPod, a window popped up on the screen saying, ""The iPod "Edward's iPod" cannot be synced. An unknown error occured (13019)). I click "Device" on my iTunes Library to make sure the song was in my iPod. It showed the song that was recently synced now listed under "Device", but when I physically looked for the song on my iPod Touch, it does not appear on there at all. It all started when I decided to put a Playlist I created in the iTunes Library and transferred it on to my iPod. Do you know why it may affected my syncing process and is there any way where I could get the syncing function back to normal so that I can continue adding songs on my iPod? Thank you for listening.    P.S. My iPod iOS version is 4.3.5.
    Message was edited by: edwardwashere

    Try here:
    iTunes: Error 13019 during sync

  • HT1329 How can I get my old music library onto my new computer when my old laptop with all the library is broken?

    My old laptop had all my music library on it and I have no back up. I have gotten a new laptop (a PC not MAC) and really need my music onto my iphone, please help!!

    Depending on what the problem with the laptop is, you could take the hard drive out of the laptop and put it into an external hard drive caddy (laptops uasally use 2.5" drives). This should allow you to access all the files on the drive however if the hard drive is damaged you will have a harder time recovering the files.

  • My iphone 3GS went black..how do I get it working again?  Charging and shut off no response...?  Help

    Please Help

    If this happened to you after you updated to iOS 5.X you may need to hold the Home and Sleep buttons down for 60 seconds or more.  This happened on my wife's brand new iPhone 4S and the only thing that woke it up was to hold the buttons down for more than a minute.  Not sure what causes this, but it only happened the one time.
    Good Luck.  If this doesn't work you may need to take it to the Genius Bar at your local Apple store, assuming you have one close by.

  • Had to install a new hard drive on my mac book how do I get my music from my classic ipod to transfer to my new hard drive on the mac book?

    had to install a new hard drive on my mac book how do I get my music from my classic ipod to transfer to my new hard drive on the mac book?

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Editting PDF documents that were created by a MAC doesn't work because of font incompatability.  How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

    Editting PDF documents that were created by a MAC doesn't work because of font incompatability.  How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

    If it's a Mac font and you're on Windows, you can't. If you are also on a Mac, you'll need to purchase the fonts (fonts are generally non-transferable, like software. One of the reasons pdf exists), install them and try your edits.
    But it's best to edit the original document and create a new pdf when finished.

  • How do i get my computer to start itunes when i plug my ipod in please

    Dear All,
    How do I get my computer to start up itunes when I plug my ipod in.

    - With the iPod connected to the computer go to the Summary pane in iTunes for the iPod and under Options check the box that says open iTunes when the iPod is connected.
    - If when you manually open iTines and connect the iPod the iPod does not show in iTunes:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • How can I get Mac mail to open winmail.dat attachments on lion 10.7.3

    How can I get Mac mail to open letter attachments winmail.dat??   (Lion 10.7.3) Any help appreciated...

    Sorry peterskine,
    it's true in part. There's more then one article on the subject "Recipients receive a winmail.dat attachment":
    http://office.microsoft.com/en-gb/outlook-help/recipients-receive-a-winmail-dat- attachment-HA010153018.aspx?CTT=1
    The odd thing is that my colleague and me use the same release mountain lion and we received the same email from someone on Outlook2007. He received the mail with the attachment, whilst I saw a "Winmail.dat". It already happened to me on snow-leopard, some month ago. Up til today I don't know what the difference between our machines is.
    But it is interesting: the same OS, the same mail-clients (Apple Mail) and still different results.
    Note: on my machine it used to work properly. It just suddenly happened that I started to receive winmail.dat files in stead of proper attachments.
    When I have more time on hand, I cant try to find out why this happens.

  • Photoshop Elements 13 stopped downloading to my OS 10.9.5 before completion.  How do I get it to finish?

    Photoshop Elements 13 stopped downloading to my OS 10.9.5 before completion.  How do I get it to finish?

    I called Apple tech support.  The device turns out to be a WiFi extender.  I never would have guessed that the extender would show up on the list since I wouldn't think of it as an airplay device, and in the list, it shows a little speaker icon.  In the process of talking with Apple, I gained a greater understanding of how airplay works. 
    It turns out that there is no stored list of devices in a file on the mac, or anywhere else.  I have seen a lot of traffic on the web from people trying to modify this list, but there isn't one.  iTunes, and other devices simply poll the network for airplay devices from time to time.
    Have a very happy holiday!
    I would like to get rid of "just give me the aster, and stop wasting my time", and replace it with my name.  The Apple tech support guy never saw that before.  Just my luck.

  • I took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer. how do i get it to finish updating or turn on?

    i took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer and it just has the apple icon on the screen. how do i get it to finish updating or turn on?

    Why would you do that when your phone is updating?
    Your phone is in recovery mode If you can't update or restore your iOS device

  • How do I get Mac App Store on my computer? I have 10.5.8 OS. If I need to upgrade first how do I do that? It says that my software is updated.

    How do I get Mac App Store on my iMac? I have 10.5.8 OS. If I need to upgrade first how do I do that? It says that my software is updated.

    And once you get Mac OS X 10.6 installed, update it to at least 10.6.6 which was the first version to include the Mac App Store (the latest version is 10.6.8). The DVD you get will almost certainly be only 10.6.3. You can update from 10.6.3 to 10.6.8 via Software Update, or you can download a standalone Combo updater (Support tab above, then Downloads).
    Regards.

  • How do i get mac app store for my new macbook air

    How do i get mac app store?

    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account
    http://support.apple.com/kb/ht2534

  • I have greyed out songs on iTunes how do i get them back or start again

    i have greyed out songs on iTunes how do i get them back or start again.
    I am so sad it just shouldn't be this hard.
    why is there not a fix in the next update
    Really how do i know what community to post on
    Help, i just want to listen to some of my favourite songs

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
    With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

Maybe you are looking for

  • How-to: Installing Windows XP on Qosmio X300

    Admins: please review this content, and make this topic sticky. I decided to try out Windows XP on my Qosmio X300-130 laptop, that came with Windows Vista 32-bit pre-installed. I bought XP Pro license + disc. Part A: Installation =============== 1. G

  • Physical Standby - Recovery error

    Hi, Windows XP, 10.2.0.1.0 I m getting the error like SQL> alter database mount standby database; alter database mount standby database ERROR at line 1: ORA-01103: database name 'PRIM' in control file is not 'STBY' Please suggest me Thanks KSG Edited

  • Breaking up a project into smaller units for YouTube

    Hi, I used FCPX and Compressor to export a 55 minute FCPX movie for YouTube. The resulting 720p file, while looking fantastic, was 4.37 gigabytes and failed to upload to YouTube. Rather than compressing to a smaller, lower resolution movie, I think I

  • SAP Logon - how to disable popups while playing tests (QC and  TAO)

    Hello, I am using QC 10, QTP 10 SAP TAO 2.03. I recorded and cofigured sample scripts and now I am planning to run it from QC during night. There is one problem to run scripts someone needs to accept popups initiated by sap logon at the beginning of

  • Transfer stock of material between plants

    Is it possible to transfer the stock of material between plants?