How do I get macbook air to boot up off of the network
how do i get macbook air to boot up off of the network
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
Similar Messages
-
My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W
try disabling email scanning for incoming mail.
One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored. -
How do I get MacBook Air to see Windows Home Server and show it in Finder?
New to Mac (having used Windows for years) so this may be a dumb question. Have a MacBook Air (new) and have a home network with a Windows Home Server on the network. I can't figure out how to get the MacBook Air to see the Windows Home Server. It doesn't show up in Finder and I think my lack of understanding of Mac OS it inhibiting me from figuring out how to get the MacBook Air to see the server and show it so I can navigate to the files on it, etc. Any suggestions on how to do this or where I can go to read about it to figure it out?
Thanks!!!If the Windows Home Server functions like a file server, try the following: From the Finder, Click the Go menu at the top of the screen, and choose Connect To Server. You will be presented with a dialog box to enter the server IP address.
You may also want to open the Preferences for the Finder from the File menu, and make sure connected servers are supposed to show up on the desktop and in Finder windows.
Disclaimer: I have not used a PC for 15 yrs, so this is general information. This is the process I use to connect to other Mac servers and to several online WebDav servers. -
HELP I can't get macbook air to boot!!
Help!! I am traveling around the world right now and I can't get my MBA to boot up. I shut it down by selecting shut down, after closing all windows. A few hours later went to turn it on and nothing! I am so frustrated! When I press the start button I get the chime, but the screen doesn't light up. I can feel something whirring, and the logo on the back lights up but that is it. I have tried repeatedly starting it and turning it off, nothing. Have tried holding the alt button and the start button at the same time, nothing.
I am getting on a plane in the morning and going to Nicaragua so I can't call Apple nor can I go to a service center. Right now it is 7:45 PM in Santo Domingo, Dominican Republic and the computer service centers are closed.
I purchased the MBA in January of 2014 so it is less than 1 year old. I purchased extended warranty recently. I have the latest OS system installed, I have no USB sticks to start from. All I have is the MBA. Slapping it doesn't help Neither does yelling at it . Any suggestions as to what I can do? This is the first time this has happened. I haven't dropped the computer.
Thanks so much!The easiest thing to do is to reset the SMC:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light may cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
How do I get CS6 intalled on my MacBook Air w/o somewhere to insert the installation cds?
How do I get CS6 intalled on my MacBook Air w/o somewhere to insert the installation cds? My CS6 software is currently installed on two iMacs. I know I will have to remove it from one.
Thank you!Thank you - think I'll pass on that option and just download from Adobe. Thanks for taking the time to reply!
-
I have a new MacBook Air. I set my password the other night when I was half asleep and can't remember it. Im still working on my old MacBook Air and can't get through the password gate on my new one. How can I reset it on that computer? I can't even get to the internet.
Thanks!Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Select Terminal from the Utilities menu. At the Terminal prompt enter:
resetpassword
Press RETURN. You will get a GUI in which you can reset your password. -
How do i connect my MacBook Air to a Printer on my Wireless Network
How do i connect my MacBook Air to a Printer on my Wireless Network ? The printer is connected to a PC running Windows 7. That PC is connected to my Wireless Network. MacBook connects fine to Network, but can't find Printer.
Hi Kappy,
Thanks for your response. I followed your instructions (for Mac OS 10.6.7). It seemed to set up OK, but when I tried to print I kept getting the following Failure Message "Session Setup failed : NT_Status_Invalid_Parameter".
When I get the "Advanced Window" should I enter anything into the "Location" field ? Maybe I am not entering the correct Workgroup, Server or Sharename ? Is there a way to make sure all of that is correct ? I went on to the computer that the printer is connected to and verified all of that, but am not sure I looked in the right places.
When I print via my Home Network from another Windows 7 Computer to the same PC, it works fine. I just can't get it to Print from my MacBook Air.
I thought of using the IP Address. How do I find the IP address of the Computer that is connected to the Printer ? Is it what they call the IPv4 Address, or the IPv4 Default Gateway ?
Appreciate any help you can provide. -
Macbook Air froze/turned it off to restart. Will not restart just goes to gray screen like it is reloading and then shuts off. Have tried everything. When trying to reapir it says incorrect number of thread records, should be 108456 instead of 108455. Invalid voume directory count/the volumbe macintosh HD was found corrupt and needs to be repaired. How do I repair it?
Hello cgstephen
You would need to contact Apple or an Apple Authorized Service provider by checking out the page below. It will have everything you need to know about setting your MacBook Air up to get it repaired.
Service Answer Center - Mac notebooks
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks
Regards,
-Norm G. -
I have MacBook Air late 2011 with encryption enabled the mac froze and I pressed the power button to shut it down but then the gray screen appeared no wheels nothing just gray. I tried all steps but nothing helped. Worse than that only the pram key combination works I cant get the cmd-r or just alt or any combination to work??? Any suggestions would help. Thanks!
P.s. I am on mountain lion with ssd encryption enabled. The mac froze when the internet stopped the one from the cable (I use ethernet usb one) when I turned wifi on it froze. I have disconnected everything when trying the steps except power cable.Boot into Internet Recovery (command-option-R at the startup chime) and try to repair the boot volume in Disk Utility. You will have to unlock the volume before you can do anything with it.
-
I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message and the computer wont restart!
What is a error message and what do you see when it appears?
Haven't much problem with Airs around here, since they have a SSD they tend to be more reliable.
Perhaps it was a bad update, have you ran through this list of possible fixes?
Do as many as possible, starting with #1. Until the problem is resolved.
Use the boot 10.6 USB instead of the disk of course.
Step by Step to fix your Mac -
How do.I restart macbook.air after forgetting password
how do.I restart macbook.air after forgetting password
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password,
OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself
Reset OS X Password Without an OS X CD — Tech News and Analysis
How To Create A New Administrator Account - Hack Mac -
How can I buy macbook air with students offer
Plzz tell me how can I buy macbook air in india with students discount
Hey akshar123,
Thanks for the question. I found the following information which may help to resolve your question:
http://www.apple.com/in/buy/
Where can I buy Apple Products?
Are discounts available?
Education
To get discounts for Education, call Sales on 1800 425 4646 (toll free) or 080 2574 4646, SMS "SALES" to 54646 or email [email protected]
Thanks,
Matt M. -
How to connect my macbook air with thunderbolt to tv via hdmi?
How to connect my macbook air with thunderbolt to tv via hdmi?
With this adapter. You will also need an HDMI cable.
The Thunderbolt port doubles as a mini DisplayPort on the MBA. -
how to see my macbook air on the TV monitor after I finished home sharing for the system?
Did you purchase your MacBook Air new? Do you still have its box? Locate its serial number and telephone Apple at the number shown at the bottom of this page (1-800-MY-APPLE if you're in the U.S.). They can help you.
-
My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this? I have restarted my computer multiple times, **** it down, and ran a diagnostic test to tell me nothing is wrong and my computer is not running any applications. There is no reason for the fan to be on full blast! when I try to set the option to show my battery icon in the menu bar, it will automatically uncheck. How do I fix all of this?
Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.
Maybe you are looking for
-
Not able to use collection multiple times in a jsp using logic:iterate
I have following question: I am working on a report using J2EE. I have a collection(resultset) which has 3 different types of vendors information along with other information in the collection and I want to put them into 3 different sections on my re
-
Best Adobe program for compelling editorial portfolio
Hello, I am a writer, editor, and all-around communications professional. (In these times, it doesn't hurt to diversify.) I'm consequently trying to put together a portfolio in an easily accessed format (PDF) that showcases writing, editing, and grap
-
Problem on web app using root context in weblogic 7.0.2
I got problem on servlet which running on root context "/" in weblogic 7.0.2. I have remove the default web app (which use the root context) before the web app. The web application was deployed without any error. However, when the servlet run to the
-
How can i get javascript to work with version 18 - all boxes ticked but still problem
I have WINDOWS 8 (for 2 weeks) , Firefox v18. I try to use a banking site that demands javascript but when I try to use the site, I get "javascript not working (or available). If I go into Youtube , any video I pick fails to run - instead I get flash
-
Hi All, I've mad an online voting application with some forms and reports and... . How many parallel end users can connect to an APEX application? Is there any limitation for number parallel users? Please answer me. Regards Edited by: Navid_G on Nov