How do I get map info? All I get is a blank grid.

When starting the maps app the only thing that shows up is a grid.In all three (3) views there is not a thing that shows up except for the pin that marks the current posistion.

I have never used that, so I haven't been through the steps. Here's the original:
eMac Consulting | Joe Streno | Downgrade iTunes 11 to iTunes 10.7.
According to my check on it just now the author is outlining a newer procedure involving the use of Pacifist 3.0.10.
I would not have expected App Zapper to be able to uninstall software that had been installed before App Zapper was installed.

Similar Messages

  • How do I import Map Info Tab files into Spatial for a map of europe?

    How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
    So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
    The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
    When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
    This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
    I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
    Any Help welcome :|
    Tim

    Tim,
    MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
    Andy Greis
    CompuTech Inc.

  • How do I get rid of the grid that appears when I want to edit a photo

    How can I get rid of the grid that has suddenly appeared when I edit photos?

    Make sure that you have installed East Asian language support.
    * http://en.wikipedia.org/wiki/Help:Multilingual_support_%28East_Asian%29 Wiki: Help:Multilingual support (East Asian)
    * http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/int_pr_install_languages.mspx?mfr=true - Microsoft Windows XP - Install East Asian language files on your computer

  • How do I get rid of the grid lines that appeared when I opened my picture in Photoshop?

    So I was going to edit a .jpg file in Photoshop and when I went to place it or open it in the software, it showed me this weird set of lines that sort of make a grid. How do I get rid of them since it overlaps with my picture?

    or Ctrl (Cmd) ; to toggle the guides of and on, or Ctrl (Cmd) h to hide (toggle) Guides, Grid, and Marching ants.

  • How do I get rid of blank pdf windows that appear in mission control? My adobe acrobat program isn't even open.

    Everytime I go into mission control I see blank pdf windows. I can't get rid of them except when I restart my computer. Otherwise I have to put them all into 1 desktop in mission control so they don't clutter my other desktops. The windows only appear in mission control and not in the actual active desktop. I've tried closing any open application that uses pdfs but that doesn't help. Any ideas on what could be causing this?

    Hi Bill,
    I came to the problem this morning with a fresh perspective and have solved the problem: I realized the text was in Cambria, so I changed it to the dependable Times New Roman. I created the PDF and NO pound signs appeared scattered around in the PDF.
    Ay, fonts!
    Thanks for replying, and have a great day!

  • How do i get the new blank tab page back into the tab bar

    i took the new blank tab off the tab bar how do i put it back on?
    and when i am on a page and click the number to go to the next page, it opens in a new tab. how do i make it open in same tab.?
    one more, how do i make it so when i am on a page i can right click the mouse and make the link open in new tab?
    thank you all for any help you can give me.

    Do you mean the new tab (+) button?
    Open the Customize window and set which toolbar items to display.
    *"3-bar" Firefox menu button > Customize
    *if missing items are in the Customize palette then drag them back from the Customize window on the toolbar
    *if you do not see an item on a toolbar and in the Customize palette then click the "Restore Defaults" button to restore the default toolbar setup
    *https://support.mozilla.org/kb/customize-firefox-controls-buttons-and-toolbars

  • How do I get the dvd blank tape out of the computer

    I have successfully copied onto a dvd from my camera using Idvd08 One step. I did about four dvd's ok. Then, when I opened the idvd and chose "one step" and put in the blank dvd, it would keep showing on the screen the directions , when I chose "ok" it then went back to the opening icon where I would choose "one step". repeatedly. and the blank dvd is stuck in the computer. I tried holding down F!2 but that didn't work to eject the dvd. I have about 10 more movies to put onto a dvd from my camera. They are short about 10 minutes. Any suggestions would be greatly appreciated. Thanks.

    I did get the dvd out of the computer. I finally found a direction that worked. I still cannot get the idvd to record from the camera using 'one step'. thanks for any suggestions.

  • How do I get the X-Y GRID INSPECTION.VI to wait until data collection is complete before it starts moving?

    I am using a PCI-7344 card with LabView to control a 3-axis servo motor motion system in conjunction with a data acquisition system. The intent is to collect data at each grid point of an X-Y grid.
    Using the X-Y Grid Inspection (Template).vi as a starting point, I programmed my data acquisition vi to start when the Check Blend Complete Status.vi returned a value of TRUE. I expected the while loop to complete once the data acquisition was complete, but the system starts moving at the same time the data acquisition starts.
    Is there a way to force the motion system to wait for the data acquisition to complete prior to moving to the next waypoint?

    If you enter a positive value into the blend factor control (period in ms), the board will wait this amount of time until it starts the next move.
    The Check for Blend Complete.flx function returns TRUE when this wait period is finished. Thus you will see the bahvior you have described.
    There are three options I can think of:
    1. Check the move complete status in order to start your measurement after the move has come to a stop.
    This method might be not the ideal solution as you need to be sure that your measurement doesn't take longer than the wait period you have entered as blend factor. Of course you can make this period very long but then your overall test time will increase.
    2. To avoid the disadvantage of 1. don't use blending at all. Instead start a
    move to the desired position, wait for move complete, do your measurement and start the next move. This method makes sure that you don't waste time.
    3. This might be the smartest and fastest method but there are a few additional requirements:
    - The time for your measurement is fixed
    - You can use an external trigger or scanclock to start your measurement.
    If these requirements are met you could combine the x-y grid example with a breakpoint example.
    You could program your board to generate a breakpoint (trigger) at each target position. The Breakpoint output of your 7344 is connected to the trigger or scanclock or whatever input of your measurement device. Now each time your axes reach the next target position the 7344 fires a trigger and your measurement device acquires data.
    Best regards,
    Jochen Klier
    National Instruments Germany

  • Help, How do I get rid of the grid marks when converting Numbers spreadsheet to PDF?

    I'm having an issue when Converting numbers documents in to PDF. When I export to PDF, I get an additional page or two of gridlines..
    I also get the chart lines and cell lines showing up on my PDF.
    My equipment is MacBook Pro Mid 2012 - OSX 10.9.2
    Running Numbers version 3.1

    Resize the table so it only contains the relavent cells for what you are printing by dragging the table resize controls:
    activate the table, then drag size control:
    Sized for data:
    you can also use the scaling control in the print dialog to adjust the content to fit the page:

  • Firefox is stuck in blank-how do i get out of blank?

    xxxxxxxxxxxxxxxxxxx

    Hi Geoff,
    Thanks for answering and when I went to send you the screen I clicked on it and it brought it up properly.
    Thanks for helping me such a simple thing about the only thing I didn't click on.
    Thanks

  • How do I get an inserted DVD's icon to display on the desktop.  It did with Snow leopard but won't

    How do I get an inserted blank DVD's icon to appear on the desktop?  It doesn't appear anymore now that I've upgrated to Maverick.  I want to drag photos from iphoto to the disc to burn them.

    Finder >Preferences>Sidebar>CD's/DVD's
    MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.4

  • My calendar on my iPhone 4 erases all data over a month old except for recurring events.  How Do I get it to keep the info and not erase calendar events?

    My calendar on my iPhone 4 erases all data over a month old except for recurring events.  How Do I get it to keep the info and not erase calendar events?

    Settings>Mail, Contacts, Calendars>Calendars>Sync>All Events.
    Note: If you're using a work Exchange account, the administrator my have restricted your options for this setting.

  • I connected my iphone to the computer after my husband had been connect with his iphone, I lost all my photo's contact's and calendar and my husbands info  was dowe loaded to my phone. How do i get rid of his stuff and retieve mine

    I connected my iphone to the computer after my husband had been in itunes with his iphone, when i connected my phone I lost all my info, photo's calendar, contacts etc, and my husbands info was downloaded on to my phone. how do I retrieve my info and get rid of his.

    are you using icloud? if so try to log in on your phonre using your apple id not your husbands.
    do this for me ok?
    thanks,
    techguy3347

  • HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

    when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

    What version of iTunes are you running on your computer? You need to update to the current version.

  • How do I get all my pins (bookmarks) to show up on maps rather than choosing one from the bookmark list?

    How do I get all my pins (bookmarks) to show up on maps rather than having to choose from the bookmark list? I can see my list getting very large and more cumbersome to search. In google maps, all my starred locations show up on my map.

    Have you let Apple know you would like to see this feature? They do not participate in the forum, and their only source of user feedback is the feedback page. To let them know you would like to see a feature, go to the feedback page at www.apple.com/feedback and select the appropriate link.

Maybe you are looking for