How do i get more verizon cards in my store?

I work at a k mart in franklin , NC. and we have been sold out of verizon cards for MONTHS. and i have no idea how to go about getting more. i have been trying to figure out how to get more for ages, but its prooving to be very difficult. ANY IDEASSSS?

Actually the dept manager normally has to order the cards, via whatever means it occurs. Reason being shelf counts are never correct. The department manager should also have a contact via a company VZW contracts with to visit each store to see what is needed. Have the manager contact that person

Similar Messages

  • How can a get more than 1 page on a greetings card in elements 11

    How can a get more than 1 page on a greetings card in elements 11

    Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
    You can see the difference if you use Alt+F to open the File menu or Alt+B to open the Bookmarks menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
    * "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
    * "Bookmark This Page" can be accessed via the right-click context menu of that browser page.
    * "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
    See also:
    * [[How do I use bookmarks?]]
    * Bookmark All: https://addons.mozilla.org/firefox/addon/bookmark-all/

  • How do I get the 1121 card to read the switch and make it a 1 or 0 to count pulses?

    Hello,
    I am developing a test stand to test tires. We have LabView 7.1 and the SCXI chassis with an 1121 transducer card. I am trying to count the rate and total number of revolutions made by the tire. The signal is acquired from a 12V-proximity switch that is actuated once per RPM. The tire turns at 1,000 RPM or a little more.
    The signal will have to go through a 100-foot cable to get to the LabView chassis, will this be a problem?
    How do I get the 1121 card to read the switch and make it a 1 or 0 to count pulses?
    Will LabView be able to read this many pulses per second?
    How do I get MPH and a RPM reading out of it?
    Thank you,
    James Happe

    Hi James,
    Since you are cabling your DAQ board to an SCXI chassis with an 1121, you will not be able to use your counters without additional hardware.
    The 1121 is an analog input signal conditioning module. It performs filtering and attenuation to help measure analog signals. What it does not have is access to your board's counter pins.
    In order to use your counter pins you will need to get the necessary hardware. You have two options:
    1) Buy and SCB-68. This is a breakout box that will cable directly to your DAQ board replacing your SCXI chassis. You can connect your signals directly to your counter with this. However, I would advise against this because your application has a 12 volt signal. This will overload the 5v maximum voltage for your counter pins.
    2) Buy a 1180 feedthrough panel. This will allow you to use all of your DAQ board's functions with the SCXI chassis. Withouth the 1180 feedthrough panel, the SCXI-1121 is the only thing connected to your DAQ board. Since the 1121 only performs conditioning on the analog inputs, that is all you can access. The other pins cannot be used (no access). With the 1180 feedthrough panel, you can put a connector block on and access all of your other pins (including the counter pins). Again, I would advise against this since your 12 volt signal will overload your counter pins.
    My suggestion would be to perform an analog input task. Set up your 1121 in MAX and use a LabVIEW shipping example. In the shipping example select an analog input channel from your SCXI-1121 module. Set the appropriate voltage range and take some measurements. Once your signal is connected and you can read it using an analog input example you are half way there.
    Take the analog input shipping example and modify it to perform frequency analysis on the voltage readings. You can simply wire the data from the DAQmxRead VI into one of the frequency analysis VI's (noted in my first post). The output if that VI will give you the frequency of your signal.
    -Sal

  • How do I get more text options in photoshop??

    How do I get more text options in Photoshop?  I have the basic package, but I would like more script options.
    Thank you,
       Maureen

    I don't suppose you have a full CC subscription?  It comes with a feature called Typekit which I love. Along with an ever increasing range of top quality fonts, it has the best font manager I have used, and excellent search facility.
    The web is full of additional font sites like dafont
    http://www.dafont.com/
    Otherweise, Google is your friend
    If you want Text Effects then Google will help you out there as well

  • How do i get more ios

    how do i get more ios

    The 2G can only go as high as iOS 4.2.1. You need iTunes 10 or later on the computer to update.

  • How do I get more space on my startup disk

    How do I get more space on my startup disk?

    Freeing Up Space on The Hard Drive
      1. See Lion's Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • How do i get more memory on my mac book air? is says that i can add 2 more gig how?

    how do i get more memory on my mac book air? is says that i can add 2 more gig ??? or wat files can i delete

    Macbook Air memory is soldered to the logicboard.
    You can only get 4GB or 8GB (2012 Models) in the Air when you order it that way.  Otherwise, you're stuck with 2GB.
    Unless you're talking about hard drive space - then it is upgradeable - click HERE to see which one corresponds to your model.

  • How do i get more memory installed on my macbook air

    How do i get more memory installed on my macbook air

    If you are referring to RAM, the Air's RAM is not an upgradeable component. The RAM memory is soldered to the main board, and there are no expansion slots.
    It is the price Air owners pay for miniaturization. Every Air is manufactured with all the memory it will ever have. Shop wisely.
    It is technically possible to upgrade the SSD storage though, but will probably void any warranty.

  • How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

    How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

    Depends on the Mac; what model and processor is it?
     > 'about this Mac' > 'more info'
    In the first section (hardware overview) post this info;
    Nothing below that is reqd, especially not the serial number.

  • How do I get more volume when watching a movie and can I use headphones?

    How do I get more volume when watching a movie? And can I also use headphones?

    Many governments now limit how loud headphones can go. Europe has been plagued with this for many years. Separate amplifiers are available.  
    I believe volumes should be kept at reasonable levels to avoid hearing loss, but it's not the governments job to protect me.
    I prefer Beyerdynamic over Bose Headphones. (They spend a lot less money on advertising.)
    http://www.amazon.com/beyerdynamic-DT770-PRO-250-ohm/dp/B0006NL5SM/ref=sr_1_1?s= electronics&ie=UTF8&qid=1308969660&sr=1-1

  • How do I get more with QuickVPN

    How do I get more out of QuickVPN?  I would like to be able to access more than the shared document files.  Can I run an application that is located on the Office computer from a remote location?  Can I get to "My Documents" without having to share the folder.  So many questions about how this works, with so little operating documentation.  I am kind of disappointed so far.  I have a WRV210 router with 4 network computers behind the router.  Would like to be able to set p 2-3 tunnels for various remote access computers.

    you can try using remote desktop in the computer (just search the internet on how to set-up RDP in your computers) -- this way you have control of more than files on the computers behind the router
    i vaguely remember reading something about using some software after connecting to QVPN but unfortunately, I cannot find it anymore

  • How do I get more the features?

    How do I get more features for my iMovie?

    You can't restore changes that are caused by removing support for features like happened with the status bar. Such changes can only be restored via an extension (Status-4-Evar). Other changes can be undone by toggling prefs or via code in userChrome.css that doesn't require an extension, but do require editing the userChrome.css file and adding specific CSS code.
    See this mozillaZine forum thread about "Fx4 .css tweaks":
    * http://forums.mozillazine.org/viewtopic.php?f=23&t=2057009
    You can right click the orange Firefox button to open the toolbar menu.
    * Click the Menu Bar entry to make the Menu Bar visible.
    * Click "Tabs on Top" to remove the check mark and place the Tab Bar at its original position just above the browser window.

  • I have just downloaded Elements 11 & there is only one frame (basic) in collage, how do I get more?

    I have just upgraded from Elements 7 to Elements 11 but find in the photo Collage there is only one frame, how do I get more, my old 7 had a good variety???

    Hi Wobygong5,
    I am afraid PSE11 has just one theme, ie. Basic.
    However you can go to Expert mode, and then create a new image of the size you want, and then insert frames from the Graphics panel. You can insert as many frames as you want.
    But Photo Collage will offer you just one theme.
    -Rahul.

  • How do I get more than one signature option in Fill and sign?

    How do I get more than one signature option in Fill and sign?

    Hi,
    Are you trying to place more than one signature on a PDF document?
    Please explain the workflow.
    Regards,
    Anand

  • How do I get more effects in my action box?  I am only showing a few, like BOTTOM BORDERS, LOSE WEIGHT AND SPECIAL EFFECTS. That is all. The turotials I've checked into all show a long list of effects in the actions box. If anyone could help, I appreciate

    How do I get more effects in my action box? I am only showing a few, like "Bottom Borders, Losing Weight, Resize and Crop, and Special Effects. And they do not list but a few effects. When I have watched the tutorials, they are showing a long list of effects in the action box. (with a side space bar)  I do not.  When I have clicked on the little arrow at top, and clicked "Load Actions", a box comes up, but it is blank,saying "no items match your search".  I'm lost!  If someone could help, it would be much appreciated!  I would like to start using this.
    Thank you. 

    Apple Computer Customer Relations:
    1-512-674-2500

Maybe you are looking for