How do I get my 3rd party instruments to show up in my Logic Pro instrument library?

I have purchased and downloaded orchestra instrument libraries from Albion. How do I get them to show up in my instrument library so they can be used?

Hi
If you mean the Spitfire Albion series (?) these run within Kontakt.
Most 3rd party plugins do not directly support the Logic Library, so you would need to manually load in the plugin and any setting within the plug itself.
You can then save that as a "Logic" Setting or Patch, which will show up in the Library.
There is a large collection of Logic Settings for many 3rd party plugs over at LogicProHelp.com
CCT

Similar Messages

How do I get a 3rd party WiFi adapter to be recognized as default WiFi?

I have a really great USB WiFi adapter that unfortunately does function the same as the PCI-e WiFi adapter. Essentially I have to connect to networks with the software that came with the adapter (which is really good) and I cannot use the status bar WiFi icon. This isn't much of an issue but unfortunately this means that AirDrop does not recognize this device either. I must turn on the PCI-e adapter (which is practically broken) to use AirDrop. Is there a way that I can make my USB adapter (Alfa AWUS036NHR using Realtek RTL8192C chipset) act as an integrated adapter?
I realize that
defaults write com.apple.NetworkBrowser BrowseAllInterfaces 1
will get AirDrop to work on all interfaces, but I'm really wondering if I can make Mac accept my adapter as "WiFi" under networks

Something.....a Mac or PC will need to have a 5.x version of AirPort Utility installed on the computer.
Perform a factory default reset on the Time Capsule by powering it off for a few minutes. Then, hold in the reset button first and keep holding for an additional 10-12 seconds while you simultaneously plug the power back into the Time Capsule. Release the reset button after the hold period and allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Open up AirPort Utility on the computer, select the Time Capsule and click Manual Setup
Click the Base Station tab below the row of icons to type in a device name and password that you want to use for the Time Capsule, set Time Zone, etc.
Click the Wireless tab next to the Base Station tab
Hold down the option or Alt key while you click on the Wireless Mode setting box
Select the Join a wireless network setting
Select the name of the wireless network
Enter the password for the wireless network
Verify the password
Click Update to save the settings
Note....everything here assumes that the router that provides the wireless network is using WPA2 Personal security, which is the default setting for the Time Capsule.

Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

10.6.8 won't run on a PowerPC Mac.
10.6.8 also won't run the latest Java. Here's what version of Java you can run:
https://discussions.apple.com/docs/DOC-5532

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

How do I get the Jam Pack instruments downloaded from mainstage 3 to show up in Garageband '11?

I downloaded and installed Mainstage 3 to be able to download the jam pack instruments and loops that come with it and use them in Garageband '11. I read that I can use the software instruments in the program, however none of the jam packs I downloaded show up in the list of software instruments in Garageband.
I clicked on the menu which tells me if I want to display 'Garageband','my settings' or 'All' of the instruments, but no 'Jam Pack' option shows up.
how do I get the jam pack instruments to show up in Garageband? I want to know how you import the instruments in the program.

It looks like nobody here is already using Mainstage 3 with GarageBand, since there is no need to upgrade from mainstage 2 while it is still working. What you are reading here on Mainstage, JamPacks, and GB has been tested with Mainstage 2 but not 3.
Did you download all contents for Mainstage? WIth Mainstage 2 the JamPAcks were part of a separate download. Launch Mainstage 3, and check, if there is a menu entry somewhere that will let you download additional contents. If you do not see any JamPacks directly, they may be bundled with "Logic" or "Legacy" items.
In Mainstage 2 it looks like this. Your version probably has a different panel.
Once everything has been installed, reboot.

Can't get my 3rd Party Sales Order to create the PO automatically...

I'm trying to get the 3rd Party Sales Order process to work and I would like it to create the PO automatically (it is already creating the requisition without issue). I have:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
iv) Set the Auto PO flag on the Purchasing tab of my NLAG material
v) Created a Vendor Info record
BUT I still don't get a PO being created automatically .... can anyone see where the problem may be?
Thanks.

Hi Dennis - I really appreciate the feedback but I started this thread with ....
I'm trying to get the 3rd Party Sales Order process to work and I would like it to create the PO automatically (it is already creating the requisition without issue). I have:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
iv) Set the Auto PO flag on the Purchasing tab of my NLAG material
v) Created a Vendor Info record
BUT I still don't get a PO being created automatically .... can anyone see where the problem may be?
I have since confirmed that I can trigger a PO creation by running ME59N BUT the PO is not created automatically when I save the sales order despite what the help text on the item category implies.
I think I have already done every you have suggested and even a little more, or maybe I'm missing something? Do I need to do something with ALE - turn something on perhaps? Have you actiually seen this functionality working? I'd love to hear from someone who has.
Regards.
Patrick

How to connect WDJ to 3rd Party Backend Systems(Oracle).

Hi Friends,
How to connect WDJ to 3rd Party Backend Systems(Oracle).
Please give Step-by-Step Explanation. This is first time I am connect to Oracle System. Can you give Step-by-Step Explanation.
Regards
Vijay Kalluri

I recommend that you perform the access to Oracle through an EJB and consume this EJB in WebDynpro.
http://wiki.sdn.sap.com/wiki/display/WDJava/OracleConnectivitywithEJBusingWebDynproApplication
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d2638c-4b04-2d10-d2a3-992fdf1e3d55
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70929198-0d36-2b10-04b8-84d90fa3df9c
regards,
Angelo
Edited by: Angelo Antonello Borges on Jun 16, 2010 10:52 AM

On garage band how do you get on to the instruments

on garage band how do you get on to the instruments?

It's probably more effective to post in the Garage Band forums here:
GarageBand

How Good Is Lion With 3rd Party Applications?

Hello everyone, I was wondering how well Lion is running 3rd party applications? More specifically ProTools (LE)? I've heard a few rumors that Lion has been a little buggy with things like that, So I just thought I would ask before I go ahead and purchase it.
Thank you for reading!
--Benjamin

Happy reading:
http://roaringapps.com/apps:table

HT5544 How do I get at least the covers to show up in their collections on ipad?

I have set preferences to sync everything in both ibooks on ipad and on desktop and I am using the same apple id on both devices but my 3rd party epubs and pdfs are not all showing on my ipad. How do I get at least the covers to show up in their collections on ipad?

I had a similar issue with my Outlook contacts' home addresses missing on my iPhone after having upgraded to iOS 7. There is a workaround - for each problematic contact on your iPhone, add a dummy address by editing the contact. The home address will now appear. If you have many contacts at once, try the workaround by using this method of batch-editing iPhone contacts.

I have much fewer pics on my pc photo stream than my ipad and iphone. how can i get my pc photo stream to show all my pics?

I have much fewer pics on my pc photo stream than my ipad and iphone. how can i get my pc photo stream to show all my pics?

This is all just a partial answer since details will depend upon how you want to do it.
Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
You'll need to get it all onto one iTunes collection on your Mac Pro, then sync the devices to that. iTunes only lets you transfer purchases from a device, otherwise you have to use third party software.
I guess you could also look into getting iTunes Match.

Motherboard went in my g5 desktop so i go my hard drive extracted with all my data..I now have an ibook g4 laptop and am trying to get gb working but get this message: he Instrument Library is invalid. GarageBand expects a valid Instrument Library folder?

Motherboard went in my g5 desktop so i go my hard drive extracted with all my data..I now have an ibook g4 laptop running off OSX 10.4.11 and am trying to get Garageband working but get this message: The Instrument Library is invalid. GarageBand expects a valid Instrument Library folder?

Contact Apple Support:
http://www.apple.com/support/contact/
Apple - How to Contact Us:
http://www.apple.com/contact/
Be sure to refer to the repair ticket number.
Sounds like a terrible mixup.
Good luck & happy computing!

How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend

How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend the scale is reset to 1 = 1.

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
Hope this helps.

How do I get my Exchange "home" addresses to show up in Contacts?

I synch my iPhone contacts from my work Exchange Server. Ever since I upgraded to IOS7, I cannot see any "home" addresses for my contacts. All I can see is "work" addresses for each contact. All phone numbers and e-mails are fine. It's only caused the "home address" field to disappear on my phone. How do I get my Exchange "home" addresses to show up?

I had a similar issue with my Outlook contacts' home addresses missing on my iPhone after having upgraded to iOS 7. There is a workaround - for each problematic contact on your iPhone, add a dummy address by editing the contact. The home address will now appear. If you have many contacts at once, try the workaround by using this method of batch-editing iPhone contacts.

How do I get my 3rd party instruments to show up in my Logic Pro instrument library?

Similar Messages

Maybe you are looking for