How do I get my 6500A Plus to stop auto printing of Yahoo Daily Digest. Everytime I turn on.

Every-time I turn my 6500A Plus on it prints Yahoo Daily Digest. It was also printing Epicurious food news letter but that apparently has stopped? What do I need to do to get these cancelled. I do not have these apps on my printer.
Thanks,

ronaldjp,
Have you tried removing the files from the print queue?
Start
Control Panel
Devices and Printers
Right click on printer and select "see what's printing"
Click on Printer, and Cancel all Documents
Make sure you re-boot.
Let me know if that helps.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

How do I get my 6500A Plus to stop auto printing? When I turn on It prints Yahoo Daily Digest?

When I turn my 6500A Plus printer on it auto prints, Yahoo Daily Digest and Epicurious. I do not have these apps on my printer.
How do I stop.
Thanks

This may help...
Go to your eprintcenter.com account, find it in my print apps (if not there, add it). Then run setup to remove the subscription.
mikehd

How do I get Calendar on Mac to stop auto correcting the end time?

I input my work schedule into Calendar manually every week and I copy and paste one event to save some time. One annoyance I run into is when I'm altering the time from say, 10am-6pm, to 4pm-10pm. As soon as I switch the start time from am to pm, it automatically adjusts the end time to 10am on the following day. So then I have to go back and manually change it from an event spanning 2 days to an event that should only span 1 day.

This works for me:
To turn off Phone Calling on your iPad or iPod Touch, go to FaceTime under Settings and switch off iPhone Cellular Calls. On your Mac, open the FaceTime app, then go to Preferences under FaceTime, and tap Settings. From there, switch off the iPhone Cellular Calls option.
Found it here:http://www.pocket-lint.com/news/131449-why-s-my-mac-taking-my-iphone-calls-how-t o-turn-off-apple-continuity
I realise it doesn't quite solve the issue of FaceTime "knowing" whether the call has already been answered on another device, which I agree is a flaw. But in my case, I don't want to receive regular phone calls on my Mac at any time. Only the very rare FaceTime call. So turning off cellular calls is a solution of sorts.

Did the update to OS 5...synched all my apps..then only 11 pages of apps are visible..the others are invisible..If I move an appfrom the 12 plus pages in itunes to a lower page...It becomes visible....WHY?..How can I get all 20 plus pages visible?

Did the update to OS 5...synched all my apps..then only 11 pages of apps are visible..the others are invisible..If I move an appfrom the 12 plus pages in itunes to a lower page...It becomes visible....WHY?..How can I get all 20 plus pages visible?

OK....First,you are right, OS 5 has the 11 page limit....you must create folders of Apps until you get below 11 pages of combined folders and apps...NOTE.....the upgrade to OS 5 killed all of my old folders and folder organizations...this may be an issue for all????.....I have over 300 apps so when the old folders went away...I was left with 20 plus pages....only 11 visible....It took me awhile to find out what happened....Since I have 64G it seems that 11 visible pages is a silly limit since the apps are on the machine...

Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
This is what I did:
I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
I ran 'hp-check', which gave no errors or warnings:
tjoff@mek-403-jakbo-01:~$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.10
date_time = 2011-11-16 14:30:35
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
| DISCOVERED USB DEVICES |
Device URI Model
hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
erial=CN16F2402Q05JW
| INSTALLED CUPS PRINTER QUEUES |
B-403-271-A4-COLOR2
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
B403-271-A4-BW
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
HP-Officejet-6500-E710n-z-FAX
Type: Printer
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
Communication status: Good
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x5412 at 002:005:
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
Device node: /dev/bus/usb/002/005
Mode: 0664
| USER GROUPS |
lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
| SUMMARY |
No errors or warnings.
Done.
I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
"Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
and
"The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
In the terminal i have the following:
tjoff@mek-403-jakbo-01:~$ sudo hp-setup
[sudo] password for tjoff:
HP Linux Imaging and Printing System (ver. 3.11.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching on USB bus...
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
tjoff@mek-403-jakbo-01:~$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.11.10)
Wifi Configuration Utility ver. 1.1
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Channel write error
error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
Done.
I do not how get past this stage, and any help is welcome.
This question was solved.
View Solution.

A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1

How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.

The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
I suggest that you try one of these general areas, then pick out the specific model that you have:
Desktop Computers Notebooks

How can I get netflix on Apple TV to auto play the next episode?

How can I get netflix on Apple TV to auto play the next episode?

I don't have the answer to this question, and yes, I checked the "I have the same question, too" box.. But so did 30 some other people.. So, I've scoured the web and looked high and low into the Apple TV device.. HOW CAN I DO IT? My playstation 3 did it[.. My WDTV box top I've had for 2 years can do it! My Smart Vizio TV [netflix app built in to the tv] can do it! My Apple ipad can do it. My iPhone can do it.. So, can my Apple TV do this? Or Not?

How do i get the syncing icon to stop

how do i get the syncing icon to stop?

I had. Turned out it was the "preview new tabs option", which I guess has changed since I last updated. Thanks though.

How can i get my wireless to work on my printer hp officejet pro 8600

how can i get my wireless to work on my printer hp officejet pro 8600

You'll get faster help w/this question by posting it in the Wireless forum...here:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/bd-p/Networking
I am an HP employee.

How can I get my macbook pro running Lion to print on my HP photosmart 309a??

how can I get my macbook pro running Lion to print on my HP photosmart 309a??

Did you install the drivers? Or have Software Update install them? This printer is supported:
http://support.apple.com/kb/HT3669

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

How can I get the template( word rtf ) for PO – Printed Purchase Order ?

I want to convert the “PO - Printed Purchase Order” report from Oracle rdf format to BI Publisher. I am looking for the template but could not find in UNIX.
As per the Oracle blog, the template is available. Please see the URL : https://blogs.oracle.com/xmlpublisher/resource/121BIPReports.pdf
The template code is POXPRPOL_XML.rtf
when I look at the $PO_TOP/patch/115/publisher/templates/US directory, I cannot find POXPRPOL_XML.rtf
How can I get the template( word rtf ) for PO – Printed Purchase Order ?
Thank you,
Biju Varghese.

How can I get the template( word rtf ) for PO – Printed Purchase Order ? XML Publisher Administrator -> Templates
find by code or name
open it and you can downloadtemplate by "download" button

After installing IOS 6.1, how do I get items in "Music" to stop moving?

After installing IOS 6.1, how do I get items in "Music" to stop moving?

I was having this same issue. I went into Settings -> iCloud and turned the Notes sync ON (which when I tried to do previously, i was prompted to create an iCloud email address which I already had). Once I turned that on, I went to Settings ->Notes and I now see a "Default Account" selection which is set to iCloud. Now all of my new notes save on the phone and on the cloud. This doesn't fix the fact that I appear to have forever LOST all the notes I had before iOS6.1. Apple, we're still waiting for a response???

How do I get my ipad to recognizie my brother printer.? It is AirPrint compatible.

How do I get my ipad to
Recognize my brother printer? It is an air printer compatible ...

Make sure that the printer software is fully updated. Sometimes you have to install a firmware update for the printer before it will work with AirPrint, you can check for updates on the Brother website.
If the firmware is up to date and If you are sure that you installed the software correctly, try rebooting the printer, your router and the iPad. Unplug the printer and the router from power for about 30 seconds. Plug them both back in...router first.
Reboot the iPad. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.
See if the printer will work after you reset everything.

How do I get iPhone photos to re-appear in "Import" window? I had "Automatically Import" turned on in Aperture prefs.

How do I get photos to re-appear in the "Import" window? I had "Automatically Import" turned on in Aperture prefs. Now I cannot see the photos in my import dialog that are still on my phone. I normally import without Photostream into specific folders on a NAS drives and with specific folder and file-naming details. I then have Aperature delete those photos as I import them.
How do I "revert" to having Aperature "forget" that I accidentally had "Import Automatically" turned on?
I tried deleting images from the PhotoStream import folder, closing Aperature, disconnecting phone, and then try to re-import.

When I turned off "Ignore Duplicates" in the Import dialog, then the photos that have already been imported into the Photostream library but are still on my phone reappeared as available to import into another Aperture Library as well as the correct folder structure on my NAS drive.

How do I get my 6500A Plus to stop auto printing of Yahoo Daily Digest. Everytime I turn on.

Similar Messages

Maybe you are looking for