How do I get my airport extreme to show up under hardware in my Lion server app.

My airport extreme is not showing up in Hardware in my lion server app. How do i configure the settings on my airport extreme to work with the lion server app?

Hi there, it's pretty easy, see this link & check back if you have any problems...
http://email.about.com/od/macosxmailtips/qt/et_gmailosxmail.htm

Similar Messages

  • How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1

    How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.

    The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
    As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
    I suggest that you try one of these general areas, then pick out the specific model that you have:
    Desktop Computers             Notebooks

  • My Time Capsule disk shows on my iMac but not my MacBook Pro. How do I get the Airport Extreme mounted disk to show as an available Time Machine disk on my MacBook?

    I just replaced an Airport Express with a new Airport Extreme. My iMac recognizes the external hard disk I have connected to the Airport Extreme, and my Time Machine is backing up to it. But I can't get my MacBook Pro to recognize the disk as available for Time Machine. Both are running Mavericks, and the MacBook is only a couple of months old.

    Hey Tim Cargal,
    Thanks for using Apple Support Communities.
    This article explains how to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows.
    AirPort: How to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows
    http://support.apple.com/kb/ht1331
    Have a nice day,
    Mario

  • How can I get an Airport Extreme card to recognize a Nintendo DS WiFI?

    With an Airport Extreme Base Station the Airport Admin Utility lets you enter the hexidecimal code for the DS (Nintendo calls this the "MAC Address".). The Airport Admin Utility will not open because I do not have a base station. My iMac is connected to the web by ethernet cable and I use this iMac as the base station for my wireless network. Where can I enter the "MAC Address" for my son's DS?
    iMac G5   Mac OS X (10.4.4)   1st edition

    My son got a DS for Christmas. I have the Extreme base station and I had to use WEP security and not WPA. You have to get the WEP key from the Admin software. According to the Nintendo Wifi site, the Nintendo Wi-Fi Connection USB Connector is not compatible with Macintosh so you can only use a base station. This is from the Nintendo web site:
    Will I be able to use the Nintendo Wi-Fi Connection if I have a Macintosh?
    As long as you have a wireless router that is compatible with the Nintendo WFC -- and almost all of them are -- then you will be able to connect to the Nintendo WFC from your home. For gamers who do not have a compatible wireless router, and do not wish to purchase one, Nintendo offers the Nintendo Wi-Fi Connection USB Connector as an alternative. Unfortunately, this device is not compatible with Macintosh systems. You can still play by connecting at a local Hotspot, or purchasing a compatible wireless router.
    Hope this helps.
    Andre
    PowerBook 15", 1.67 GHz, 1.5 GIG RAM   Mac OS X (10.4.3)   G4 QuickSilver 733Mhz, G4 400 Mhz, G3 Desktop

  • HT3728 How can I get my airport express to show on my network ?

    I did a hard reset on my airport express and now all it does is flash amber. I have thw airport utility open but it only shows my airport extreme.

    I don't know what you mean by "hard reset."
    I'm a great believer in the KISS principle.
    Configuration is simple if you start from a factory default condition.  Then connect the Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations.  After confirming that it works, insert your desired administrative and WiFi passwords.
    Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

  • How do I connect my airport extreme to wifi as a repeater

    how do I connect my airport extreme to wifi as a repeater?

    Thanks for the info.
    Unfortunately, Apple has designed their routers to only extend or repeat the wireless signal from other Apple routers.
    It would be extremely unlikely that the AirPort Extreme would be able to extend or repeat a wireless signal from another manufacturer's router.
    I suppose that it could not hurt to try, but if the Extreme is still unopened, it might be a better idea to return the Extreme, get the information about the router at the neighbor's and then use a product from the same manufacurer that would be compatible to repeat or extend the wireless.

  • How do I use my airport extreme with my FIOS router?

    How do I use my AirPort Extreme base station with my FIOS Router to extend my network?  I have hard disks connected to my AirPort Extreme and would lik to access them.

    Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

  • How do i use the airport extreme to extend my wireless network

    How do i connected my airport extreme up to my existing network so that it can extend my wireless through out the house ??
    Can it be done wirelessly or do i need an ethernet cable thats about 10m ?
    Keith

    The AirPort Exteme can "extend" your existing wireless network (using wireless only) if it is being provided by another Apple router.
    If your current main router is not an Apple product, then you will need to plan to connect the AirPort Extreme to your router using an Ethernet cable.
    Post back for more information if needed.

  • How do i add my airport extreme to my DSL WIFI Modem to expand my network

    I have a DSL MODEM with WIFI. It replaced my Airport Extreme as a router.
    How can I use the Airport Extreme in conjunction to expand my wifi service through out my house.
    AIRPORT EXTREME MODELA 1354
    Modem is a Qwest PK5000z
    WPA-WPA2 PERSONAL
    MAC BOOK PRO 2011
    OS 10.9.5

    Ok, the Airport Utility Program NOW shows the globe, a green light next to the word internet
    below, there is a now a yellow triangle next to AirPort Extreme with an ! in it. """the messase to the right says
    Diveic Not Found:Airport Extremem was previously part of your net work Check that is still in range of you network
    (it is it's right next to the PK5000) it's plugged in. Forgetting this device removes it from this network."""
    AND NOW
    Bob, I can now see where I missed the fact that to do this the Airport had to be Wired_via ethernet,
    I was looking for it to be a boost wirelessly, not tethered.
    I’m not at liberty to modify the living space I am living in, holes and such and have cable run up exposed.
    Again, ignorance on my #1 status. This has been very informative but I do see where I can't accomplish what I wanted to do, have a booster in another room wirelessly.
    I think what I need to do is restore the Airport to factory setting and sit on it, not literally.
    I can't thank you enough for taking all this time with me. I trust you understand what I wanted and you did your best to provide.
    So I guess that's it for now.
    I'll look to you in the future, you really know your stuff
    All the best to you from MN
    jojoguitar

  • How do I connect my airport extreme to windows 8.1

    how do I connect my airport extreme to windows 8.1

    Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

  • How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    Start by establishing a permanent fixed Ethernet cable connection from one of the available LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme.
    Ethernet cabling can be run up to 300+ feet or 100 meters, so you should be able to locate the AirPort Extreme exactly where it will be needed to provide more wireless signal coverage.
    Configure the AirPort Extreme to "create" a wireless network using exactly the same wireless network name, same wireless security setting, and same wireless network password that the ATT wireless is using.
    The final step is to insure that the AirPort Extreme is configured to operate in Bridge Mode, so it will work correctly with the ATT modem/router.
    If you need more specific steps, we need to know what operating system you are using on your Mac or PC. If you have a Mac and do not know which operating system it is using.....click the Apple icon in the upper left corner of the screen and then click About This Mac, and post back with the OS X version number that you see there.

  • How do i recover my airport extreme password

    how do i recover my airport extreme password

    Please check out the following AirPort User Tip for details for recovering an AirPort password.

  • How do I extend my AirPort Extreme network using airport express

    How do I extend my AirPort Extreme network using airport express

    see http://support.apple.com/kb/HT4145 and other support articles
    and/or
    https://discussions.apple.com/thread/4462789?start=0&tstart=0
    and many other discussions on this forum about this topic.

  • How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
    I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

Maybe you are looking for