How do i get my boot camp windows7 internetconnection to work with usbadapter

How do I get my internetconnection via usbadapter (twisted pair TP) to work on my Boot Camp windows7. I run OS LION. WiFi works good on both windows and Lion. On Lion does it also work good with the USBadaper to TP connection. I have the latest Brodacom driver installed on Windows7.

I do not know the answer myself, but I bet if you post in the boot camp forum, someone will be able to help you in a more timely manner. https://discussions.apple.com/community/windows_software/boot_camp. Good luck.

Similar Messages

How can I get my Boot Camp partition off my old drive?

I swapped out the stock 160gb drive that came in my MacBook Pro since it was acting up. I installed a new drive and restored it with Time Machine, but now my Boot Camp partition is still on my old drive. I slipped my old drive into a usb sata enclosure and tried booting from it in hope I could back it up with Winclone. When I went into the startup disk selector the drive would not show up (but it sounded like it was trying to spin up). Earlier when I pulled the drive out of my MacBook Pro it was still functioning fine, so I do not think the drive has failed.
Any ideas on how I can get the Boot Camp partition off the old drive? Thanks for your help.
-Ryan

Some drives require more current to spin-up from a "cold start" than most USB ports put out, even if the port supplies. Additionally, if the drive is failing, it may require even more power for the startup.
I have a couple USB enclosures with external AC power that I keep around in case I run into drives like this. Failing that, I also have a couple of USB cables which use 2 ports to provide additional current. Also the cable length, and gauge makes a difference.

I'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

i'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

Page 5, step 2, #2, 2nd bullet.
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.7.pdf

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro6,1
Processor Name:    Intel Core i7
Processor Speed:    2.8 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache (per Core):    256 KB
L3 Cache:    4 MB
Memory:    8 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    MBP61.0057.B0F
SMC Version (system):    1.57f18

You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

How can I get address book 4.1.2 to work with osx 10.6.7

How do I get address book 4.1.2 to work with osx 10.6.7

You probably can't, but you can start by posting your queston in the correct forums...the OS X Mail and Address Book forums, as this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way.

I have a Creative D100 wireless speaker. How do I get my bluetooth on my Mac to work with the speaker. It doesn't appear to recognize the speaker.

I have a Creative D100 wireless speaker. How do I get my bluetooth on my Mac to work with the speaker. It doesn't appear to recognize the speaker.

Have you gotten in touch w/the speaker manufacturer? Their response?

Boot Camp 5.1 not working with iMac late 2013 3 TB

I tried to use Boot Camp 5.1 on my new iMac with 3TB FD. I bought a Win 8.1 OEM DVD with key.
I followed the instructions of Boot Camp (deselcted the first step with ISO because I have the DVD). When it comes to the windows installation I can't select the BOOTCAMP partition because of the used GPT-style.
I thought this problem was fixed with OS X 10.9 and Boot Camp 5.1.
Do you have any ideas?

From MacBook Pro (13-inch, Mid 2010) - Technical Specifications, you have a built-in Optical drive. Is it functional?
Storage
250GB or 320GB 5400-rpm Serial ATA hard drive; optional 320GB or 500GB 5400-rpm hard drive, or 128GB, 256GB, or 512GB solid-state drive6
8x slot-loading SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Maximum write: 8x DVD-R, DVD+R; 4x DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD-R; 10x CD-RW
Maximum read: 8x DVD-R, DVD+R, DVD-ROM; 6x DVD-ROM (double layer DVD-9), DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD
You will need to burn a DVD using Disk Utility (Yosemite): Burn a disk image to a CD or DVD and use it for Windows installation. You will also need a USB2 flash disk for the BC drivers for it to work. Please ensure that the DVD is burnt at the recommend rate for the physical media and verify, otherwise you will end up with an unusable DVD.

How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion? Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7.
I would like to read and write in both directions from drive to drive if possible. I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares.
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:". However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access.
Is the Paragon NTFS that comes with Mountain Lion limited in some way?
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps. I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me.

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

How can I get an old Casio CTK-593 to work with Logic Express?

Title pretty much says it all.
I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
Thanks in advance.

Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
Fox

How do I get Vio Pov.1 (helmetcam) footage to work with Premiere CS4?

Hi.
I'm having the same problems as this guy: http://www.adobeforums.com/webx/.59b78c2b/7 with video from the Vio Pov.1 not playing in premiere. Although his topic is already there I made a new topic to get some fresh hits and try to resolve this once and for all. Also because I make some reference to Canon Ixus video files.
I have run the codec-analyzer g-spot on one of the pov.1 video files and it states that I have the proper codec installed.
Codecs in video clip:
Video: XviD ISO MPEG-4 @ 3101kbps 720*480
Audio: 0x0050 MPEG-1 Layer 2 @ 32000Hz 64 kb/s , Monophonic
Still no luck playing/editing them in Premiere CS4. Audio plays fine, video shows but frame is only updated every 4-5 seconds and not the actual frame that corresponds to that point in the audio but actually the next frame from the first one. It continues like that.
Specs:
Running Vista 32 bit and Adobe Master Collection CS4
Quad-core 2,4GHz
4GB ram (i know, only about 3 to 3,5GB utilized in 32 bit OS.)
Nvidia 8800GT 512mb
74GB WD Raptor as system/adobe software drive.
500GB Samsung spinpoint throuch E-sata as project drive.
The wierd thing is this:
I have a separate system drive with windows xp installed, Adobe Master collection CS3 fully updated and NO other software. (same computer)
Differance between CS3 and CS4:
CS3,no codec pack:
- Canon ixus video files WORK
- Vio Pov.1 reported as audio only, not even thumbs showing FAIL
CS3, ffdshow codec pack installed(ffdshow-rev2180_20081004_xxl)
- Canon ixus: WORKS
- Vio Pov.1: WORKS
CS4 on vista, relatively fresh install, fully updated, no codes packs.
- Canon ixus: FAIL
- Vio Pov.1: FAIL (video)
CS4, same as above with ffdshow installed:
- Canon ixus: FAIL
- Vio Pov.1: FAIL (video)
CS4, same as above with morgan mjpeg codec installed:
- Canon ixus: WORKS (yay!)
- Vio Pov.1: FAIL (obviously as it's not mjpeg)
Someone with some insight into these things, please point me in the right direction. Does anyone have experience with managing video settings within the ffdshow interface? I'm not experienced enough to tweak all the settings.
The current project Im working on is a small web clip shot with a Panasonic HDC-SD100 and the Vio Pov.1. It's a short rally on ice clip I'm looking to produce the panasonic video files are NOT supportet in CS3 even with codec packs.
CS3=
panasonic: no!
vio-pov1: yes!
CS4:
Panasonic: yes!
Vio-pov1: no!
See my problem?
I added the Canon ixus comparison since I previously had problems with it but have now solved them. Also to show that Adobe seem to have cut support for certain formats when moving on to CS4. It has taken me a looong time figuring out how to get ixus working in premiere because I'm not used to this stuff.
The ideal solution is not having to convert clips before using them so I would like to focus on that avenue. After all it finally worked with the ixus clips so I have hopes that eventually a solution can be found for the Pov.1 clips which is also more widely spread and used in proper productions.
Im very sorry for the format of this post, and the length. I just had to get it out there to see if someone can help me.
/ Johannes

Thank you Stanley and Bill for your input.
Sorry for checking the topics progress so late.
Bill, could I ask what specific software you are using for this batch conversion task?
Like I stated in my first post I am able to edit the Pov.1 material when plugging in my secondary HD with Xp and CS3 on it. So I can fiddle about with that as well but if you could supply me with the name of your software it would save me all that time swapping harddrives back and fourth. There are so many out there, would like to eliminate risk of malware and such by using the software you have.
(reminder, cs3 does not do AVCHD, #1 of many reasons why I prefer cs4)
I'm still testing various xvid/mpeg4 settings with ffdshow and other codecs, I'm still determined to find a solution, for everyone. After all, it CAN run under CS3.
I have also submitted the case to Adobe. Hoping to hear from them soon. Anyone else care to throw some thoughts in?
Thanks again for the input so far,
Johannes

How do I get my Mac version of Elements 12 work with my epson printer/scanner

HELP
How do I get my Mac version of Elements 12 to work with my Epson XP-510 in scanner mode using the get photo's function.
It does not show the scanner being available even though the scanner works with other programmes and will print direct from organiser to the printer.
Ron Steele

You must install the TWAIN driver:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html
However, it may still not work, since some scanners are not compatible with the 64-bit PSE 12. Epsons have the most problems, unfortunately.

How will i get my brand new Cinema Display to work with Widows and MacBook

I have just bought an MacBook Pro 15" with a 20 inch cinemadisplay. I am running dual boot with windows Vista.
My problem is that i cant get my cinemadisplay to work with my MacBook when running Vista
Can anybody give my å tips?

Try installing the drivers from this site:
http://docs.info.apple.com/article.html?artnum=306891
We had the same issue and these drivers solved the problem.

How do I get my USB 2.0 webcam to work with SL and Skype?

HI
I have a Mac Mini running Snow Leopard and I have been trying to figure out how to get my USB 2.0 Logitech webcam to work with Skype or iChat. Any hints...? Skype just doesn't see the webcam....

hassiman wrote:
HI
I have a Mac Mini running Snow Leopard and I have been trying to figure out how to get my USB 2.0 Logitech webcam to work with Skype or iChat. Any hints...? Skype just doesn't see the webcam....
Does your Logitech webcam work with your Mac OS X (10.4.10) Mac?
This may help for Skype: http://discussions.apple.com/message.jspa?messageID=9975071
This may help for iChat: http://discussions.apple.com/forum.jspa?forumID=1345
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.1) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.1)
G5DP1.8GHz (10.5.8) G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) LED Cinema Display External iSight

How do I get my newly installed airport card to work with SKY?

+This question was originally posted on the G5 iMac section, but I think in retrospect it would be better here. Sorry for my mistake Administrator+.
Here's an interesting one for all you good people. Just bought and paid for an airport extreme card to pop into my little lad's G5 iMac, running Tiger(gggrrrrrrrr etc).
Managed to install it without a hitch.
Trouble is when I try and set it up to work with my SKY router (UK) it keeps telling me that my password is incorrect. The fibber! I know it IS correct as it is the one that SKY gave us and that we have successfully connected both my wife's MacBook and my own MacBook Pro with.
I have tried messing about with all kinds of configurations, but the set up assistants seem more bothered about yapping on about airport base-stations and computer-to-computer networks.
Now don't go telling me I need to get a base station to make it work. Please.
Can anyone offer some sound advice?
It does work on and off though. It works more often when the other Macs in the house are running (What-the-flip???)

You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

How do i get my boot camp windows7 internetconnection to work with usbadapter

Similar Messages

Maybe you are looking for