How do I get my captivate lesson to back up through branching and Questions?
I have a course of 60 lesson slides with question slides appearing throughout the lesson. It also uses branching. Our legal department wants the user to be able to back up through the entire lesson but I have encountered the following problems:
- When I use the skin to create a navigation bar the back up buttons won't follow the branched section the user followed but instead simply back up to the previous slide number.
- When I created my own back up bottons, which can be set to jump to the branched slides, I discovered that I can't add them to the question slides.
- When I tried a combination of my own buttons for the lesson slides and the back button, that is an option within the question slide properties, I discovered that once the user clicks this back up button on the question slide (and then comes forward to that question slide again) he/she is stuck and can't proceed past the question slide. The slide remembers the previous question response (the radio button selected previously is still black) and not even the skip button will allow the user to advance.
I'm hoping someone else has encountered this type of problem and can help me with a solution. I currently have both captivate 3.0 and 4.0.
Any help at all would be appreciated a lot.
Kevin Martin
Here's something to try...
Remove the skin so users must use the buttons you add, which will work with the branching. Add a menu to the project and strategically pick the slides that are included in the drop-down. I'm pretty sure you could have the menu go to quiz slides. I use lesson dividers as the options in the menu so users can go to the beginning of a section.
I will warn you that many folks have experienced quiz slides locking up if the user goes backwards through the module at any time. When they get to any quiz slide, there will be a caption that says "You did not answer the question completely" and the user cannot continue.
To avoid this glitch, I re-created quiz slides from scratch using click boxes and text entry boxes. This gives you a little more control over things, but you can't replicate every type of quiz question CP has.
Hope this helps...I'm no expert, but I've dealt with the same issues. Good luck!
Similar Messages
-
I got my computer reset and my iTunes deleted. I still have everything on my iPod Touch but when I downloaded a new iTunes on my computer everything was deleted. How do I get everything in my iPod back to my iTunes and into my computer?
I just need everything back in my iTunes library on my computer. Help! Please!See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
How do i get my old firefox bookmarks back after uninstalling firefox
how do i get my old firefox bookmarks back after uninstalling firefox and then reinstalling it from scratch. I did a system restore, but i only retrieved my old tabs, no book marks :(
Hello,
see this
* https://support.mozilla.org/en-US/kb/recover-lost-or-missing-bookmarks?
* https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile -
I have an IMAP mailbox that seems to only show mail 7 days on my iMac running Snow Leopard. However, on my MacBook Pro I can see all old mail that I have not deleted. It is running the next operating system (Lion?). Does anyone know how I can get all my old mail back on my iMac. It is my primary computer and I need some of those old messages. I have tried to rebuild the mailbox but it has not done anything.
I have tried to rebuild the mailbox to no avail. The mailbox behavior says: Drafts (not checked) store draft messages on the server, Notes (checked) show not in Inbox, Sent (checked) Store sent messages on the server Delete sent messages when (option never selected), Junt (not checked) store junk messages on the server Delete junk messages when (option never selected), Trash (checked) moves deleted messages to the Trash mailbox and (checked) store deleted messages on the server Permanently erase deleted messages when (one month old option selected).
I have not set up any rules that I know of other than a signature, in the very least I have not changed any. -
In mail, my attachments, both photos and documents, appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the main message???? Thanks for your help, Karen.
softwater wrote:
...and costs $14.99
Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
I completely agree. -
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this. -
i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?
No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
Chris -
I use Safari in my imac with Google as my search engine. Recently, Bing took over. Extensions still shows Google as default search engine. Search starts as Google but switches to Bing. How do I get rid of Bing, go back to Google?
Hey ravenbird1,
Thanks for the question. After reviewing your post, it sounds like you want to use a specific search engine.
Safari 7 (Mavericks): Search the web
http://support.apple.com/kb/PH17150
To set the default search engine, choose Safari > Preferences, then click General.
If you are having problems with extensions you can uninstall and reinstall the extension.
Safari 7 (Mavericks): Install and update Safari extensions
http://support.apple.com/kb/PH17200
Select the extension, then click Uninstall.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP
what do you mean the old computers link?
my ipad is sycned with my computer but nowhere is there a link
and if I connected it with a new computer and set it to sync it would replace all my data with the data from the new computer -
Ok can anyone tell how I can get the apps that I paid for on iTunes and the app store using my I pad because I don't have a computer and when I try to redownload the apps it keeps asking me for my card number and when I give it my card info it says that it's an invalid number when I know that it's not
If you are getting an 'invalid security code' message then is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store -
I have an iPad 2 and recently purchased an iPad mini. My husband will take over the iPad2. How can he get an icloud account for this iPad (eliminating me) and his iPhone5?
Delete your iCloud account on the iPad 2, then he can follow the instructions to create his own iCloud account on it:
http://www.apple.com/icloud/setup/ios.html
Then he can setup his own account on his iPhone. -
I had an iPhone 4 with all my music on it. Got rid of my desktop when I got an iPad. Now I have iPhone 4S. How do I get my music transferred from old phone to 4s and iPad without a desktop with iTunes on it?
Restore the device from the backup created.
If no backup exists, there is nothing to recover. -
how can i get my user manual info back onto my settings menu
this heading did not appear on the settings menu following a restore necessitated bt a freezing screen glitch thanksI'm not entirely sure what you are referring to, there isn't a user manual section in the iPad's Settings app. If you want an iPad then you can either download it from here : http://support.apple.com/manuals/ipad/
Or if you download the iBooks app then there should be a copy in the ibookstore in it -
my old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod
Try these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991 -
I recently got a new iphone but when I restored it in iTunes one of my games that I have played for months RESET. How do I get my old game info back?
If you made a backup before you restored it you can restore your iPhone from a backup and your game data should be restored. When you connect your iPhone in iTunes you can right click on it in the sidebar and select restore from backup.
Maybe you are looking for
-
Allow Posting to Previous Period - MMRV
Dear Friends, We can open / close MM periods thru MMPV & see the currently open periods thru MMRV. Now when we check current Period in MMRV, we see three periods: Current period 07 2009 (October 2009) Previous period 06
-
Why am I having trouble burning home movies over 2 hrs?
If it exceeds single layer, I use Dual layer which holds 4hrs of space. I do recall having an issues with anything over 2 hrs previously not use to have this problem. 240 min on the blank DVD, it should allow for 4hrs of home movies, right? Once my
-
BCM 4313 wireless can't connect, ethernet works only in live CD
Hi! I'm finding it impossible to get Arch working due to internet problems, and I've spent a while trying to figure out how to solve them and got nowhere. My laptop has Broadcom 4313 wireless. Using wifi-menu, I can see a bunch of wireless networks,
-
AddCurrentValue date paramater Type Mismatch Error
Post Author: brentlaw CA Forum: Other I am using vb6 and CR XI. I have Component "Crystal ActiveX Report Viewer Library 11.0" loaded and Reference to "Crystal Reports ActiveX Designer RunTime Library 11.0". I can successfully use AddCurrentValue an
-
I have a networked Dell printer with a scanner. Before I switched to my new iMac with Leopard, I used "SMB to scan to computer," with the result being that the docs just scaned to a folder on my HDD. But now with the iMac and Leopard all I get is "Lo