How do I get my HP 7520 to stop printing on both sides of the paper?

I do not know why, but my HP 7520 Printer started printing on both sides of the paper rather than one side.
How do I reset it to print on only one side

Hi @Wineroth
I can help you disable the duplex printing feature. I suggest resetting the printing system to delete all printer presets. I suspect something was saved at some point that is causing the printer to print 2 sided.
OS X Yosemite: Reset the printing system
Please let me know if this resolves the issue,
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

How do I print on both sides of the paper on microsoft word, excel for mac?

My printer supports printing in both sides of the paper, and prints fine on both sides any pdf file.
But there is no way to make it print on both sides when using Microsft Word or Excel
How do I set it up?

Try asking in the Microsoft Office forums. http://answers.microsoft.com/en-us/mac?auth=1

How I can print on the both sides of the paper on printer P2055d

Can printer P2055d print on both side of the paper? How I turn on duplex? I do not have a manual.

Hi hamad5520
I have included a document for two sided printing.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03476083&lc=en&product=5157536&tmp...
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can i print on the both sides of the paper on printer 5520

how can i print on the both sides of the paper on printer 5520 when printing too many papers?

Hi hamad5520
I have included a document for two sided printing.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03476083&lc=en&product=5157536&tmp...
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Messages icon indicates that there is an unopened message but when i go into it the message is blank and no option to delete it. Any ideas how i can get rid of this and stop it from opening up in the blank message each time i open my messages?

The message icon on my iphone indicates that there is an unopened text message, but when i go into it, it just opens up a blank message, and there is no option to delete it. Any suggestions how i can get rid of this message, and prevent my phone from always opening up in the blank message whenever i go into my messages, rather than just opening as my inbox?
Many thanks

Hard restart.. While the phone is powered in, hold the power and home button. Hold them down and keep them held down. the phone will eventually shut itself off and reopen. keep held down till you see the appl elogo, then release. This will not delete anything off your phone, it will just force all apps to stop their current process. If you just turn the phone on and off, it will just pick up where it left off. Good luck

MacBookPro using Adobe how do I print both sides of the paper

Using MacBookPro
How do I set the printer to print both side of paper when using Adobe?
Other Applications work OK

Adobe... what? Acrobat Pro? Reader? Which Adobe application?
If Reader or Acrobat Pro, just select Print from the File menu:
Click on the "Printer..." button to override the defaults, and select Duplex printing:
If from another Adobe product, call back...
Clinton

How can I get one audio file to stop once another is triggered on the same page in EPUB?

I have multiple audio files on one page and am able to trigger each separately with their own control panels. Unfortunately, these can all be played over one another. Is there a solution within InDesign to stop the first active audio file once another audio button is triggered on the same page?
WIll this have to be done through Javascript?

Use buttons. They can have have more than one action. Set a button to stop the first audio, and start the second.

I have a laserjet 2200 dse. How do I get the option to print on both sides of a page?cc=US

I recently had my computers wiped clean. Prior to that, when I attempted to print, and clicked on Properties, I would chose the Finishing tab and be able to print on both sides of the paper. Now, the Finishing tab does not appear when I click on properties. What do I need to do to get those options back?

I hope you are having a great da and sorry to hear that we are having this issue
Bear in mind your HP laserjet 2200dseThis is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

How to print on both sides of paper

I have HP 3050A wireless printer. How to print on both sides of paper

This printer does not do auto duplexing. The only way to print on both sides of the page is to print one side, put the paper back in manually, and then print the next page. If you have something say 10 pages long, you can also print only odd pages, then only even pages tospeed it up.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

When printing on both sides, get unreadable stripe on second page, Imageclass D420 printer

Have a Canon Imageclass D420printer. Lately I am getting a 1/2 inch wide vertical stripe of smears the full length of the page when printing both sides. The blurred stripe is approximately 3" from the right hand edge of the sheet. The smear shows up on the second side 3" from the left hand edge of the sheet. I reprinted the same document and only printed on one side of the paper and the smear does not occur. Sounds like some roller needs to be cleaned? Anyone have similar problem.
Thanks,
Jerry Hudack

Hi jerryhudack,
To help isolate the cause of the issue, please check the following:
1. Confirm that either LTR or A4 paper between 17 to 21 lb (64 to 80 g/sq.m.) is being used when duplex printing (Note: envelopes cannot be used for 2-sided copying).
2. If using specialty paper, please test standard laser copy paper for comparison.
However, if the above has been checked, the fuser roller in the main unit may be dirty affecting the second side of your duplex printouts. Cleaning the Fuser Roller can help with the issue.
The below procedure will step you through the cleaning process. To prepare, load a sheet of blank LTR paper into the multi-purpose tray and start cleaning. Here are the steps:
Note:
- Use standard paper as the cleaning paper.
- Cleaning the roller takes approximately 130 seconds.
- When some jobs are stored in memory, this function is not available.
1. Press [Menu].
2. Press [ < ] or [ > ] to select <ADJUST./CLEANING>, then press [OK].
3. Confirm a sheet of blank LTR paper is loaded in the multi-purpose tray.
4. Press [ < ] or [ > ] to select <FIX. UNIT CLEANING>, then press [OK].
Cleaning starts.
Throw away the cleaning paper after use, and perform a duplex test print to confirm the issue has been resolved.
If unresolved, please contact us here and we'll be glad to help you further.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1

How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.

The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
I suggest that you try one of these general areas, then pick out the specific model that you have:
Desktop Computers Notebooks

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

How do I get my Sony ebook Reader to show up ("be recognized") in the top left corner??

How do I get my Sony ebook reader to show up ("be recognized") in the top left corner of the window. It never shows up and I cannot transfer books from my Mac computer to ADE. I am using Sony Reader Library but it is developing problems!! Can anyone assist??

No solution yet. One would think that Adobe would recognize that several complaints have been reported on this problem. Obviously, nobody knows how to fix it!! Sorry I can't be helpful!!

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? A lot of my preferre

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.

All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself.

HT201318 how can i get a refund for my icloud upgrade? i am within the 15 days

how can i get a refund for my icloud upgrade? i am within the 15 days

If in the US, follow the link below -
https://discussions.apple.com/message/16968425#16968425
it gives the USA number - if you don't live there you will have to find an equivalent number from the 'Contact Us' link at bottom right of this page.

How do I get my HP 7520 to stop printing on both sides of the paper?

Similar Messages

Maybe you are looking for