How do I get my iMac running Lion 10.7.4 to work with the PreSonus firestudio firecontrol Lion driver?!

Firestudio unit worked fine with other computer and older OS X driver.
Unless the PreSonus firecontrol driver is JUST BAD, the problem must be that my operating system isn't allowing the firecontrol driver to run properly.
How do I fix this? This is very frustrating but I refuse to give up on the problem. I have A LOT OF MONEY INVESTED IN THIS STUFF!!!
HELP!
Marco

Allan,
Which version of what do I have?
Firestudio 2626 is the firewire MIDI audio interface
iMac OS X Lion version 10.7.4
Logic Pro 9 just downloaded 5 days ago (newest version)
The firestudio driver I'm trying to run is called "firecontrol" and is for Lion. It says the firmware version is 31.7.0.0 and the FPGA version is 0 and the software version is FS Universal 1.0 and the driver version is 3.5.6.11118
Not sure what you were asking about but I'd be happy to give you more information if it would help!
Thanks,
Marco

Similar Messages

  • How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5???

    How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5?? I was prefectly happy with my iPod until I got the notice to upgrade itunes to 11.1 and would you like to upgrade your iPod from IOS 6 to IOS 7. And like an idiot I took the little green pill and pushed the button. Now I can't open iTunes, some apps; like the Lindsey Sterling app, Safari and Disney don't work either (not that I care about the Disney one, but, it's part of the base setup, you'd think "IT" would work!) almost anything with video links will not open, iCloud can't find me. All I get is that annoying white screen. I'M NOT HAPPY! I could have bought a Windows machine for a lot less money and have the same problems!?! (I'll bet Mr. Jobs is spinning like a top right now!)  And I have goggled-- found a few fixes: re-install, restore, etc. found one that stated to get iTunes back to go into the iPods setting by double ckicking the home button go to iTunes app and sign out, then sign in again-- those options didn't work. JEM24

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
      Apple Retail Store - Genius Bar

  • How can I get a sim card for Japan and will it work with my locked Iphone 6

    How can I get a sim card for Japan and will it work with my locked Iphone 6

    You cannot use a SIM card on a carrier locaked phone, other than a sim from the carrier the phone is locked to. You must first get the carrier it is locked to, to unlock your phone. Apple does not unlock phones.

  • How can i get my logic3 istation (ip106) to charge my ipod 4gen with the latest iOS?

    how can i get my logic3 istation (ip106) to charge my ipod 4gen with the latest iOS? i had recently bought it for my ipod to play and charge my ipod

    Is it compatible with iOS 5.0.1? Some users have reported that after updating to iOS 5/5.0.1 their dock no longer worked.
    Have you contacted the manufactuer?

  • Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

    Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

    My experience with upgrading from Snow Leopard to Lion is that the OfficeJet Pro 8500 Wireless will print just fine, although it seems to take a little longer to find the printer on the network. My scan function however locks up and will not work. This really is an annoyance, though, since I have VueScan, which works fine with Lion.
    Hopefully, Apple and HP will not orphan the OS native scanning feature for HP multifunction printers.

  • Does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion?

    Hi, does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion? The drivers available on the manufacturer's download site are for a newer model and were not designed specifically to work with Lion. Does anyone have a tried and tested fix for this? Thank you.
    Message was edited by: john.rm

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • How Can I get My iMac Running again when its stuck in the Loading boot up Screen?

    My 2010 21.5 Imac wont  stop loading, The wheel just keeps spinning and it doesn't even boot in safe mode. the only thing i can do is get into single user mode. My Mac doesn't respond to command + r. I am able to pull up a disk to boot from but it doesn't show a recovery disk, only "Macintosh HD", when i click it I'm back at the apple logo screen with spinning wheel.At this point i want to do one thing and that is factory reset the computer. a fresh install, delete everything, NO BACK UPS. I don't have the install CD (This Computer had a previous owner). If i were to buy a copy of the OS X from the apple store (I believe my computer was running 10.6.8, Im not 100%sure and i dont now how to find out at this point) would i be able to even put the CD in the disc drive? would it read the CD even though its stuck in the boot up(loading) screen? How would i get it out if the Drive doesn't read the disk? Do I have Other options? Thanks guys!

    You are using Snow Leopard. There is no COMMAND-R for a startup. That's for Lion or later.
    Call Apple and purchase replacement discs for your model. You cannot use the retail version of Snow Leopard on your model. You have no other options unless you have the original discs that came with the computer. When you get the discs:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • How can i get my Imac, running OSX 10.6.8 with a 2Ghz Intel Core 2 Duo, how can i get Final Cut Pro 4 and DVD studio pro 2 to run on it?

    I just bought an IMAC running OSX 10.6.8 (not sure what flavor that is). The processor is 2Ghz Intel Core 2 Duo (Late 2006). When i run Final Cut Pro 4 on it I get the following error.
                        "Configuration error
                           This software requires certain hardware or software which is missing
                                    * AGP graphics Card"
    If Final Cut Pro 4 doesn't run on my system, what version of Final Cut can I run on this as I am a filmmaker and really am comfortable with Final Cut Pro.
    On the same note I also have DVD studio Pro 2 and that just quits without any message.
    Hope any of you can be some help.
    Thank you,
    Doug

    This is my first mac in a long time so i'm not sure about what this mac is as i didn't buy this from apple (ala Amazon). I'm a tad confused about the Intel/PowerPC thing. I do know the software version for sure, but the Intel/PowerPC is very confusing. I just need to find someone who would know about this question. It doesn't say G5 on this computer. Thats my biggest confusion. Help Me...

  • HT1414 How do I get apps that require iOS 5 on my Iphone 4S with the latest version of 6.0.1 currently installed on it?  I cannot install many of the apps I want to use and am not sure what to do.  Thank you.

    I am not very good at navigating the Iphone so please be patient.  I have an Iphone 4S with the latest 6.0.1 and I would like to be able to download some of the apps that require iOS 5 on my iphone.  How do I do that.  When I look for the iOS 5 update it is no longer available.  I found that it is supposed to be available on Itunes.  I have not found it on Itunes.  All help is appreciated.  Thank you.

    Well, no. It's because that the iPod 4th Gen has iOS 6 and the apps need iOS 7. I suggest that you get the new iPod 5 because it has iOS 7. Also the iPod 4 does not have enough CPU or RAM. The new iPod 5 has enough CPU and RAM to store iOS 7 apps.
    Thanks!
    DeathBlaze65

  • How do I get a virtual lab to play,quicktime does not work with this CD,I have quicktime on other computers works fine with this CD. Technician said Cd could

    How  do  I  get  a  virtual lab to  work  on  this  computer.  The  technician  said  the  CD  is  not  compatible. Maybe  corrupt. He  seemed  he  did  not  know
    what  he  was  talking  about. I  asked  him  was  it  any  software  I  could  download  he  said  no.  This  CD  works  fine  on  my  other  computer, no  it  is  not  an  apple  computer. And  I  use  quicktime  on  both  computers. But  on  this  apple  computer  quicktime  does  not  play  this  CD, which  this  type
    of  CD  works  better  with  quicktime. Any  suggestions  on  how  to  solve  this  problem.  This  is  a   new  computer,  I  would  hate  to  think  their  is  nothing  that  can  be  done.

    I  need  step  by step  instructions  on  how  to  get  my  virtual  lab  cd  to  work. The  technician  said  cd  not  compatible  or  is  corrupt.  I  do  not  believe  their  is  nothing  that  can  be  done.  When  I  put  the  cd  in  the  side  slot  nothing  comes  up  on  the  screen.  I  have  tried  several   ways, the  technician  did  not  seem  very  knowledgeable  on  what  to  do. Also  this  cd  plays  fine  on  my  other  computer  which  is  not  an  apple  computer. Is  there  anything  I  can  do  to  correct  this?

  • Planning to get New 27" Does Boot camp work with the 1T and 3T Fusions Drives

    I am planning to get a NEW 27" IMAC [if they ever come out] and use Parallels Desktop® 8 or Bootcamp for Gamming.
    Going with:
    27" 3.4GHz quad-core Intel core I7 with 8MB L3 cache
    8GB Ram - Upgrade to 32GB 1600MHz DDR3 from Crucial or OWC
    3TB 7200rpm Fusion Drive
    NVIDIA GeForce GTX 680MX Graphic processor with 2GB of GDDR5 memory
    AppleCare Protection Plan
    Samsung SE-506AB Slim Portable Blu-ray Writer =+$89.
    I work with Photoshop, some Video and Play World of Warcraft.
    Planning to do Gaming on the PC Side with using Bootcamp or Parallels Desktop® 8.
    As you see I was planning to get the 3TB 7200rpm Fusion Drive.
    But I don't know if it would work with Bootcamp.
    Not sure if a separate Volume need to be made for the PC side?
    If a 768 SSD would work?
    Or do I have to go with Regular hard drive?

    Hello,
    Kind of funny, the 3 TB isn;tsupported for BootCamp!?
    Frequently Asked Questions
    Do I need to configure Fusion Drive?
    When ordered with a Fusion Drive, your iMac or Mac mini is pre-configured.
    Can external USB, FireWire, or Thunderbolt hard drives be added to Fusion Drive?
    An external drive cannot be used as part of a Fusion Drive volume. Fusion Drive is designed to work with an internal hard disk drive and internal flash storage.
    Can I add a partition to the hard disk with Fusion Drive?
    Using Disk Utility, you can add one partition to the hard disk on Fusion Drive. Once you add the partition, the "plus" symbol in Disk Utility to add additional partitions will be grayed out. You cannot partition the Flash storage.
    If I create a hard disk partition is it part of Fusion Drive?
    The additional partition is not part of Fusion Drive. The new partition is a separate volume that is physically located on the hard disk drive.
    Can I add a Windows partition?
    You can create one additional partition on the hard disk with Fusion Drive. You can create either a Mac OS X partition or a Windows partition.
    If creating a Windows partition, use Boot Camp Assistant to create it, not Disk Utility. From the Go menu, choose Utilities. Then, double-click Boot Camp Assistant and follow the onscreen instructions. For more information on Boot Camp see the Boot Camp support page.
    Note: Boot Camp Assistant is not supported at this time on 3TB hard drive configurations.
    http://support.apple.com/kb/HT5446

  • I cannot get my iPAD air iOS 8.1.2 to work with my epson WF 3640.  Driver is 9.31.  Is the driver of the epson up to date with the iOS?  Help please

    I cannot get my iPad air iOS 8.1.2 to talk to my epson wf 3640 which driver is 9.31.  Both are on the same network so I am not sure why it is not working.  Any help or suggestions would be greatly appreciated.  Thanks

    Hi otterSD, 
    When it comes to using AirPrint and it is not seeing your printer, the check the troubleshooting below to get it sorted out. You have already made sure it is on the same wireless network, so check to make sure that the printer does not need attention with any errors and check Epson’s website if there is any firmware updates for the printer. 
    About AirPrint
    http://support.apple.com/en-us/HT201311
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Take it easy,
    -Norm G. 

  • Why can't Apple and HP get Mountain Lion 10.8.4 to work with the HP OfficeJet 7610?  Does anyone know how to make the wireless scanning work?

    Does anyone know how to make the HP OfficeJet 7610 (latest version) and iMac 3.4 GHz i7 running 10.8.4 work together correctly?  Print function seems to work ok.  Just can't find the scanner in any setup.

    In System Preferences/Print & Scan is there a scan option?

  • TS1702 I have been charged 4 times for an item that I only wanted 1 of, how can I get a refund. There seemed to be a problem with the app when I was using it? Thanks, Mike

    I have been charged 4 times for an in app purchase when I only wanted 1 , does anyone know how I go about getting a refund?
    mike

    You can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • My lock screen just shows a black background and a User Name/Password dialog after opening the screen from sleep. How do I get it back to where it blurs my desktop image with the dialog and my account image displayed?

    I'm not sure when it began, but now my Macbook Air only shows a black background and a User Name and Password dialog box when I wake it from sleep. It used to show my desktop background blurred with my user name and icon displayed with only a text field for entering my password. I'm currently using Yosemite (OS X 10.10.1) and all updates have been done. Any help or suggestions would be greatly appreciated as I know this isn't a real problem, just an annoyance since I couldn't find how to change it back in the System Preferences.

    I just have to point out that after looking at a related post (https://discussions.apple.com/message/22661092#22661092), it brought to memory that my issue most certainly began happening after I added some DoD certificates to the keychain. This obviously has something to do with it, but it still leaves me wondering what actually causes this to happen. :/

Maybe you are looking for

  • Pin a folder of videos to home screen?

    My 30-year-old son, who has autism and is nonverbal, has  used iPad since it first came out. Right now he has the iPad Air.  He takes it to day program, where staff are often not tech-savvy. It's a shame, because more individuals are going to be show

  • When To and when NOT to use cursors

    Can anyone please refer to a good resource about When to and When NOT to use cursors. I have search on line but I haven't find anything really good. Thank you. H

  • Virtual Windows 7 machine with 4GB RAM

    I'm currently upgrading my iMac to 8GB RAM, I have a 2.66GHz processor , will I be able to install Windows 7 in a virtual machine using VMWare Fusion 4 with 4GB of dedicated RAM?

  • Please help me I need problem fixed now

    Being the young tech savvy kid I jumped straight in for the iPhone 5 and frankly was quite excited and amazed but later annoyed my charger and cable were perfectly fine when taking out of box but a couple of weeks later I had problems my iPhone would

  • Upgrading to Yosemite with Third-Party ssd's

    I'm thinking about Upgrading to Yosemite on my mac mini, primarily because I want to update to the latest version of Final Cut X, and this is only supported on Yosemite. I put this off long ago because I'm using Third-Party SSD's, and I know that the