How do i get my ipad 2 to work with another micro sim

how do i get my ipad 2 to work with another micro sim

Follow the instructions here > iOS: Syncing with iTunes

Similar Messages

How do I get my Imessages to work with another iphone again after it has stopped working?

My iphone use to always send imessages with my boyfriend's iphone now it will only send SMS texts, how do I get it back to sending Imessages with iphone?

You should of course make sure that they're both running the latest version of iOS (at least iOS5 is required) - connect to your computer and update from iTunes, if not.
Matt

How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

If you have iOS 5 installed on it, you don't need a PC. simply turn it on and set it up.
if you don't have iOS 5 then you'll need a computer.

How do I get my iPad to work. It won't slide to unlock

How do I get my iPad to work. It won't slide to unlock

Push harder!
Seriously...
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

How can i get the ipad to work because my little brother put a password on it and it now is blocked and cant get into it ???

how can i get my ipad to work because ,y little brother put a password and cant get into it ???

You must restore the iPad with iTunes.

My ipad 2 just shows itunes and plug icon my computer wont take new version of itunes too old how do i get my ipad 2 working do not care about saving data just want to use this very expensive useless item!

My ipad 2 just shows itunes and plug icon my computer wont take new version of itunes too old how do i get my ipad 2 working do not care about saving data just want to use this very expensive useless item!

My iPad2 works great now after IOS 8.1 Update
I did my iPad2 update thru iTunes on my iMac and it was sucking the iMacs memory very low during the update. Safari froze before loading the first web page and I did a hard boot and went fishing as I saw where it was going to take a long time to recover. When I tried again it wasn't quite right and then did one more hard boot and then did a Reset by going to General-Reset-"Reset all Settings" and it works real well now without loosing any data and in-home wi-fi clocks at 17Mbps download. Probably like most of you I’m sticking with OSX 10.9.5 Mavericks as it gets the job done very nicely and don’t need all that extra fancy stuff that probably will slow things down.

How can I get Phillips Fidelio to work with ios7

How can I get Phillips Fidelio to work with ios7. It worked with the previous operating system

Not sure if this is the same problem others are having, but I used to play music on my Philips Fidelio by opening the Music app on my ipad and clicking on the box with the triangle (which has now disappeared in the new OS). However, if you have the philips dockstudio app, the box still appears there and I was able to get my speakers working again.

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

HT3310 how do i get my headphone to work with the iphone?

how do i get my headphone to work with the iphone? Are there some settings
that I need to turn on so I can use my headphone while talking on the phone?

Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack.

How do I get Front Row to work with Lion?

Hello fellow Mac users,
How do I get Front Row to work with Lion? I have an iMac 27 inch computer and is the sole entertainment provider for my bedroom. I refuse to put a TV in my room and wanted to know how to get Front Row to work again on my mac? It seems that the upgrade to Lion erased the app.
I have quite a few movies and series that I bought off iTunes and is a shame that I can't use a media center app like Front Row on Lion.

I kind of have the opposite problem. I need to know how to turn off my remote on the computer. I am using the remote for my Apple TV and it keeps making the volume on my Computer go up and down (with annoying sounds).
There used to be a way to un-sync the remote with the comp but I cannot remember how and the Apple help is not much help! I have Lion.
Thanks!
Best,
Tony

How do I get my AppleID to work with iCloud?

How do I get my AppleID to work with iCloud? It says that I have a valid ID, but that I can't use it with iCloud...
How do I fix this?
Thanks!!

Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

How can I get my ipod to work with itunes?

When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

How do I get wrt54g-tm to work with Mac OS X with a cable...

How do I get wrt54g-tm to work with Mac OS X with a cable modem. Was told by tech support, they could not help me over the phone and to go on line for instructions. Still not working....

Do you have internet when wired to the router?
What exactly is the problem? What error messages do you get?
What are the current settings on the WRT?

How can I get elements 11 to work with 16 bits photos?

In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
Either way is expensive compared to photoshop elements.
http://www.adobe.com/products/cs6.html?promoid=JOLIS

How can I get photoshop CS2 to work with Windows 8.1?

how can I get photoshop CS2 to work with Windows 8.1?

Have a look at
http://forums.adobe.com/message/4976720
Cheers
John

How do i get my ipad 2 to work with another micro sim

Similar Messages

Maybe you are looking for