How do I get my Ipad2 to recognize the airport express range extender

how can I get my IPad2 to recognize the airport express range extender?

Are you trying to scan "wirelessly"?
Adam

Similar Messages

I have set up apple tv and airport express but cannot get apple tv to recognize the airport express wireless. Any solutions?

Airport Express set up a wireless network in my classroom. Apple TV is working but only recognizes the school network. I would like a solution other than connecting the two with a cable. That would require hanging cables since I am using apple TV to run a video projector.

Hi there,
I would recommend taking a look at the troubleshooting articles below and verifying that you have the Apple TV and Airport Express configured properly.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
-Griff W.

How do I get my ipad to recognize the microphone on my earbuds?

How do I get my ipad to recognize the microphone on my arbuds?

Hi,
You'll need to make sure that both your printer and iPad are connected to the same wifi network (your home wifi). When this is complete, your printer should see your iPad.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HT5570 I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password

I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password

What features do you need to change the ID for?

Hi. I'm trying to change my Apple ID. I know how to in iTunes under my account on my laptop but how do I get my iPhone to recognize the change? Thanks!

Hi how can I get my iPhone to recognize the changing of my Apple ID in iTunes (my account) on my laptop?
Thanks in advance for your input!

It sounds like you created a new Apple ID rather than changing the email address of your current Apple ID. Apps are tied to the account that they were initially installed with. So the only solution is to delete the app and re-purchase it with the new Apple ID.

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station. I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing. Thx

Yes. Unfortunately the stereo is too far from the wired ethernet connection My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless). The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers. I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo. The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off. When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
Maybe that explains my problem better.

I can't get a green light on the airport express. I went to the store and he said my BT router is probably blocking the extension of the network. He said I could put the serial number of the router straight into the browser, then it would give me d

My BT homehub is blocking the extension of my wireless network via the airport express, so I don't get a greenlight. The guy in the store said to put the wireless number direct into the browser and it would then give me directions as to how to unlock the BT network. But when I do that nothing happens, so I still have no idea how to unlock and extend the wireless network. Any ideas?

If you are trying to extend the wireless network provided by the BT Home Hub with the AirPort Express, this won't work as the two are not WDS compatible.

How to use the airport express to extend the range of an existing airport extreme wireless network?

The instruction manual says nothing on the topic, so maybe it is not possible. The only reason I think it is possible is that two different Apple reps told my girlfriend it was possible. Now we have one, and no clue how to proceed.
We have an Airport Extreme, but its range is maximum 30 feet. We would like to double that. What do we do with the Airport Express? (We cannot move the modem nor the Airport Extreme. What we are trying to do has nothing to do with speakers, iTunes, or printers.)
thanks
Paul

Are both the Extreme and Express 802.11n models? If so, check out this AirPort Support article; if one or both are 802.11g models, check out this article instead.

My iPod screen broke and I bought a new one, how do I get iTunes to un-recognize the old one (i heard you can only have 5 devices).

I have new iPod Nano. I want to set it up w/ the same name as my old one. I heard you can only hve 5 devices, so since I'll never use the original one again, how do I get iTunes to know that it is no longer?

You do not need to do anyhting.
You can sync as many devices as you like.

I lost my connection with my AirPort Base Station when I upgraded to the OS Maverick. How can I get my system to recognize the base station again?

I lost my connection with my AirPort Base Station when I upgraded to the OS Maverick. I can still see the Internet, but the Time Machine cannot backup now because it cannot locate the AirPort base station. How can I resolve this issue?
Steps already taken with zero success:
1. Restarted the AirPort Base Station multiple times.
2. Restarted the Mac Pro multiple times.
3. Looked online for AirPort update for 6.3.2 version.
Other Apple products in my house can still see the AirPort Base Station, however my Mac Pro and Mac Book Pro cannot.
Please advise.

That information helps. If you want to use one of the SmartStor's disks as a repository for sharing your iTunes Library, then do not configure that disk as a RAID. Format it with Disk Utility using the Erase tab. Mac OS Extended (Journaled) is the correct choice.
Connect it to your Time Capsule, then use AirPort Utility to configure access requirements for sharing it on your network. It should appear as a shared volume in the Finder, available to all your Macs as you thought it should.
I also thought maybe the extra HD space would be added to the existing Airport Disk. It isn't.
Correct. There is no way to do that. The only way to increase the capacity of a Time Capsule's hard disk is to replace the Time Capsule (or its disk, if you are amenable to disassembling it) with a larger capacity model.
If you also want to use the SmartStor as a RAID, that is another story, and you should probably attack that problem separately.

How can i get my imac to recognize the mx870 scanner

I originally was using the Canon MX870 via Bonjour to print and scan. Last night, imac would not recognize the scanner. After I deleted the device and tried to reinstall, the system preferences are not giving me an option as having a scanner.

i was able to speak to an apple customer service personnel and was advised to use the MP Navigator to print and scan. It worked.

How do I get windows 7 to talk to airport express and thus printer

Hi
I have tried all day to get a windows 7 laptop to talk to an airport express with no success.
I have installed airport utility 5.6.1 for windows 7 on laptop.
I keep getting an error -6753 comming up in utility 5.6.1 on laptop.
Has anyone any ideas or should I just send airport express back.
Many Thanks
dave

Dave,
First you should be posting in the Airport product forums. This is an iMac forum, you have only indicated you have an AEX and a Window 7 laptop but no Mac.
I would recommend using the Airport Utility app for MS Windows, this should make setup extremely simple.
http://support.apple.com/kb/dl1547

How do I get a valid IP address for airport express?

I am trying to set up my airport express. All the steps work fine except for when I get to the end it says I need a valid IP address for airport. Any help would be appreciated.

I'm not sure what you're trying to set up here? Are you trying to set up the AX to provide wireless access to the internet, or to extend an existing network?????

Can't get TIme Capsule to recognize 2nd AirPort Express

I have a 3TB 802.11n Time Capsule and an existing Airport Express (AX) situated upstairs as an extension of my wireless network. I purchased a second AX for my basement to extend the network to that location. When I plug in the new AX AirPort Utility cannot seem to recognize the new unit at all. I am setting up in the same room as the Time Capsule. I have tried the unplug and plug back in method, reset button method, even plugged in an ethernet cord from the Time Capsule to the new unit, all to no avail. Could it be a flawed unit or is there some step I am not doing??

I figured it out. You have to know to see it under the wireless icon in the top left command line. Once you select it, then airport utility takes over. Interesting that the little setup booklet doesn't tell you that.

How do I get my Ipad2 to recognize the airport express range extender

Similar Messages

Maybe you are looking for