How do I get my iPhone 5 to recognize the correct password for my wifi connection?

All of a sudden, my iPhone dropped my WiFi connection and now will no longer connect when I choose "other," and enter the network name and password. I receive the message, "Incorrect password for *******." My iMac and 2 iPads have no trouble remaining connected to my WiFi network.

Howdy msmedia,
Thanks for using the Apple Support Communities.
From your post I see that your iPhone dropped the Wi-Fi connection to your network, and it cannot find the network, nor join it if you manually type in the SSID.  To start troubleshooting this issue, I'd like you to please follow the steps outlined below.
Be sure you're in range of your Wi-Fi router (access point).
TapSettings > Wi-Fiand turn Wi-Fi off and on. If your Wi-Fi setting is dimmed,follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
TapSettings > Wi-Fiand locate the Wi-Fi network to which you're connected.
TapandForget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your deviceto the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations,install updates using the AirPort Utility.
Unable to locate a Wi-Fi network
Verify that the network is available by tappingSettings > Wi-Fiand choosing from the available networks.Note:It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learnhow to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find outwhich standardsyour device supports3.
Reset network settings by tappingSettings > General > Reset > Reset Network Settings.Note:This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tappingSettings > General > Reset > Reset Network Settings.Note:This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Take care,
Alex H.

Similar Messages

  • Hi. I'm trying to change my Apple ID. I know how to in iTunes under my account on my laptop but how do I get my iPhone to recognize the change? Thanks!

    Hi how can I get my iPhone to recognize the changing of my Apple ID in iTunes (my account) on my laptop?
    Thanks in advance for your input!

    It sounds like you created a new Apple ID rather than changing the email address of your current Apple ID. Apps are tied to the account that they were initially installed with. So the only solution is to delete the app and re-purchase it with the new Apple ID.

  • How do I get my iPhone to recognize my new email address?

    How do I get my iPhone to recognize my new email address?

    Go to Settings>Store, tap the Apple ID at the bottom, sign out, sign back in with the new ID.

  • How do I get my Iphone to recognize my MG6320 printer?

    How do I get my Iphone to recognize my MG6320 Printer?

    Hello.
    Please check the Wi-Fi settings on the iPhone to make sure that the iPhone is connected to the same Wi-Fi network as the MG6320 and your computers. 
    If you continue to have difficulties, please contact our support group using the link provided in the previous response.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do you get your iphone out of the connect to itunes screen?

    How do you get your iphone out of the connect to itunes screen?

    What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275

  • How do I get my ipad to recognize the microphone on my earbuds?

    How do I get my ipad to recognize the microphone on my arbuds?

    Hi,
    You'll need to make sure that both your printer and iPad are connected to the same wifi network (your home wifi). When this is complete, your printer should see your iPad.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • How do I get my iphone to remember a different password in safari when I change a password for a secure site that was already changed

    How do I get my iphone to remember a different password in safari when I change a password for a secure site that was already changed

    Click here and use Apple's iForgot service; if it doesn't work, contact Apple.
    (120917)

  • HT5570 I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password

    I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password

    What features do you need to change the ID for?

  • How do I get my Ipad2 to recognize the airport express range extender

    how can I get my IPad2 to recognize the airport express range extender?

    Are you trying to scan "wirelessly"?
    Adam

  • How can I get new iphone I broke the other one

    How can I get new iphone I broke the other one

    What do you mean "you broke it"?
    If you dropped it you can make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $269 USD.

  • How can I get a new copy of the Voicemail app for my LG Spectrum?

    How can I get a new copy of the Voicemail app for my LG Spectrum?  It no longer works....the screen say Loading please wait....the
    !Visual Voice Mail - A Visual Voice Mail error has occurred.  Please try again. OK   I've tryed several times with the same message.  I've
    deleted the app from my screen and replaced it from the Apps Library....still the same message.
    I cannot find an answer on MyVerizon.  Any ideas?
    Thank you,
    Dee

    OK, at least 3 is working.
    I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
    Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
    Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
    You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
    If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

  • When I try to purchase an app using my iphone it asks me for a password for the wrong email address. How do I reset my iphone to show the correct email address/apple ID

    when I try to purchase an app using my iphone it asks me for a password for the wrong email address. How do I reset my iphone to show the correct email address/apple ID

    Thanks for your reply. Having read through relevant topics it suggests that if I sync my iphone with the correct account on my pc it should use that one thereafter. i will try both.

  • HOW can I get a GOOD copy of the iTunes software for my desktop?

    I solved MY corrupt firmware file problem!
    A little background- I deleted all Apple, iPod, and QuickTime software from my desktop PC and reloaded iTunes for the (I don't know how many) time. Same thing! Downloaded it again and used the "erase iTunes" option then reloaded again and had the same result. I then cranked up my old laptop and when I got to the Apple website, I was offered an opportunity to download QuickTime and took it. It came with iTunes if I wanted, so I took that too. After the download, I plugged in the Nano and it restored to Windows format. I did not want it to sync to the laptop, so I took it to the desktop and was able to sync with Nano and downloaded my tunes. TALK ABOUT HOKEY!
    WHY does the restore program have to be resident on MY PC or MAC anyway? Seems like I could just as simply download a current copy from Apple every time I want to restore.
    WHY doesn't Apple do something about this problem and let users know about the solution? Do they not want to grab a share of the Windows business? Here is an excellent opportunity!
    Now for my question.
    HOW can I get a GOOD copy of the iTunes software for my desktop? I now know it works! Is there a hidden file or folder I should delete before I make my next attempt to cleanup and download? Why isn't this information public?
    I spent over 30 years in the DP industry. PC is not my area of expertise, but this must be the most frustrating experience of my years.
    desktop   Windows XP  

    I THINK I have solved the problem. Can't be 100% because I don't want to try a restore. At least the Apple home page lites up correctly with quicktime now. It hadn't in the past.
    Thank you for your assistance. - LRB
    desktop   Windows XP  

  • How can I get Safari to remember my ID and password for a site?

    How can I get Safari to remember my ID and password for a site?
    Specifically, I would like it to remember my 14 digit library account on:  http://polaris.plano.gov/Polaris/logon.aspx
    Firefox on my old PC was able to do this no problem.  I have recently switched over to Apple.  Thanks for your help!
    FYI, I am on a new Mac Mini with OS X 10.8.3 and Safari 6.0.4.

    Some websites request the web browser to NOT autofill the username, password.  It is possible the library site is doing that. Your previous firefox on the PC may have been sufficiently old to not be able to handle such a request.  There are password managers you can get to over-ride such things (search Safari extensions).
    charlie

  • Sync to new PC. How do I sync existing iPhone 4 to the new iTune for the first time?

    I just switch to new PC, and so came with new iTune.  How do I sync existing iPhone 4 to the new iTune for the first time?
    iTune library has no music/app, and i don't want to loose what's on iPhone.  Help!

    Oh no, I now have two more situtations; error 13019 and needed software update for version 5 (iphone). In which order should I do?  I feel so helpless....

Maybe you are looking for

  • Urgent Help Needed : Error While deploying the composite to soa server

    Hi , I an facing an issue in the deployment of the composite: The error says that: [12:50:56 PM] Error deploying archive sca_Project8_rev1.0.jar to partition "default" on server soa_server1 [http://ocmappsvr.outrigger.lan:8001] [12:50:56 PM] HTTP err

  • 270X 4G flickering

    Hello, I am a recent new owner of my first MSI product and am quite happy with the build quality. This is my first post here, so hi to all! My only issue thus far is a flickering screen when I log into windows, and the occasional flicker when browsin

  • Tranforming a Preference in Expression builder expression

    Hi there. I have a BPEL processo Preferecence populated with something like: concat('this is a test: ', bpws:getVariableData('inputVariable','payload','/client:TesteDescriptoresProcessRequest/client:input')) And when I do the ora:getPreference('TestP

  • Deep structure output Issue:

    Hello everyone, I have an output form that simply contains billing document item records. Repeating subform works great. However I have been asked to make a more complex solution. I have been tasked to output the corresponding condition records for e

  • Oracle bi presentation service is not getting started

    hi All, for this i checked the sawkig0.log file (under OracleBIdata\web\log ) i got the following details: Type: Information Severity: 30 Time: Tue May 20 10:32:15 2008 File: project/sawserver/sawserver.cpp Line: 386 Properties: ThreadID-812 Location