How do I get my iPod Nano to sync with windows 7. It stopped syncing.

I have an iPod Nano bought in 2007. It has stopped syncing when I connect to my PC. I have windowns 7. and I have done all the updates.

Hello BARBART,
I know having a device you can't use can be frustrating. I have located an article that will walk you through a series of troubleshooting steps to help get your iPod working again:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

  • How do i get my ipod nano touch screen fixed?

    How do i get the ipod nano touch screen fixed?

    Hello Kimberly j,
    You can either set up a service request with Apple through this or you can bring it into your local Apple Store/AASP and have them set one up for you.
    https://selfsolve.apple.com/GetWarranty.do
    Another option would be a 3rd party repair company who would be able to fix the iPod at a much lower cost.
    B-rock

  • HT1351 How do I get my Ipod nano (4th gen) to connect directly with my new iphone?

    How do I get my Ipod nano (4th gen) to connect to my new iphone?  Or do I have to go through a third machine?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How do I get my iPod Nano 6 to do a loop in a playlist? I can't find the repeat all button.

    How do I get my iPod Nano 6 to do a loop in a playlist?

    So you're looking for the Product Registration page correct?  If so, here is the link.
    http://register.apple.com/
    B-rock

  • How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    Hi TheGuru146,
    It sounds like the iPod isn't restoring correctly. Try putting the it into Disk Mode manually and then restoring the iPod again as described in the article linked below.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    iPod nano (7th generation)
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.
    When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    -Jason

  • HT1605 How do I get my ipod nano out of deep discharge?

    How do I get my ipod nano out of deep discharge?  I have stored it for over a year and it won't work without being plugged in

    Hi pjlmserl,
    Thanks for visiting Apple Support Communities.
    I'd suggest resetting your iPod nano, and if the issue persists, restoring it:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    Regards,
    Jeremy

  • How do i get my ipod touch to work in window 7 64bit

    how do i get my ipod touch to work in window 7 64bit

    Assuming you mean that the iPod does not appear in iTunes on your computer. see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

    why doesnt my 5th gen ipod nano not connect with windows 8?

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • How do I get my iPod nano to work in my car again?

    My iPod Nano was working perfectly fine in my car, then all of a sudden it looked as if it was paused. I tried to push play in the car but it would not allow me to listen to music. I"ve also tried changing the chord, the iPod and my car is not muted. The iPod works normal when outside of the car. How do I get my iPod to work inside of my car again?
                                                                                                                                                                                 ~Thank you for your time

    In your iTunes music library, if you sort the song list by Album, the songs within each album are sorted using the Track # field.  For the albums that have this problem, is the Track # field for the album's songs correctly entered?
    On the iPod, are you viewing the album by selecting
    Main Screen -> Music -> Albums -> (select album name)
    or by
    Main Screen -> Music -> Artists -> Albums -> (select album name)
    If you go through the Artist path, some songs may not appear on the album song list, because the artist field for some songs (on the same album) can be differently.  For example, one of the album's songs may have a "guest artist" named in in the artist field.

  • I have tried everything to get my new ipod nano to work with Windows 8.  Do I need to install new drivers or what?

    Got a ipod nano for Christmas.  Installed already bought tunes on it with my computer at the time which was running Vista OS. Had to buy a new computer in March with Windows 8.  Did not buy any songs until April 29th or so...but they will not show in my ipod nano.  Talked with a tech and he got my songs into the new computer.  However, after we hung up, I tried to download the 2 new songs into my ipod and it would not do it.  I noticed that the "cloud" icon was not by any of the songs - only the word: downloaded.  I am thinking that since this is a 64 bit computer that I need to do something else, but don't know what.  Can you help me?  Thank you
    Judy1942

    So you have tried a different USB sync cable and as well as plugging it into all the USB ports on your system?  Did you try removing all other USB peripherals (excluding keyboard and mouse if necessary) to see if that did any good?
    What happens if you connect it to another PC or Mac?
    B-rock

  • HT1491 How do I get my ipod to download itune from windows pc

    I have an Ipod Classic which is linked to an old mac from my last work place. I have downloaded some tunes from ITUNES on my new work PC which
    is Window XP. It will not allow me to use IPOD to transfer tunes from this PC as my IPOD is formatted for a MAC. Can anyone help ??

    This really isn't an iTunes Store question and would have been better asked in the iPod classic forum, but anyway, you'll need to reformat your iPod to use it with Windows. See:
    http://support.apple.com/kb/HT1339?viewlocale=en_US
    Regards.

  • How can I get my Canon A620 to work with Windows 7

    Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ? 
    I'll keep looking around. 
    Steve

    If you need photo software and don't have any you can download Canon software here.
    http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
    But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
    If  you decide to connect the camera via USB you don't need a driver; its built into W7.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How do I get my iPod Nano 7th Gen. to sort by Artist and not Album Artist?

    Why does my iPod Nano 7th sort by Album Artist? And how do I get it to sort/view by just purely Artist like on my iTunes?

    Check with the manufacturer of your radio and see if they have a compatible cable.

  • How do I get my ipod nano touch to sync my music

    We are attempting to attach our son's ipod nano touch to our home library. There are actually two issues: The first issue is from the account we created for him, we can't get the songs we purchased for him to sync to his ipod. The second issue is that we want to know how to get selected (and only selected) songs from our shared library to his ipod without adding our entire library. Can you help us out?

    Is the Manually manage music and videos option ticked from under this tab as well?  If not, what configurations do you have made from under your iPod's Music tab?
    B-rock

  • How do I get my iPod nano to allow me to disconnect?

    I have a barely used iPod nano 2 2GB, which I use with Windows Xp and iTunes 7.1. It started fine but a few days on it refuses to allow me to unplug the USB cable from it, regardless of whether it's plugged into the Laptop or not.
    It plays the songs I've imported into it fine but when I switch off, by holding down the play/pause 5 or so secs it shows a large green battery with a black plug in its middle and "charged" written above it. I can turn it off though.
    I've restored it once but the **** plug just won't allow me to pull it out!
    Any suggestions will be most welcome, especially as I'm out of the UK for some time.
    ipod nano 2 2GB   Windows XP   Acer TravelMate 4400

    Well, seeing as no-one online could resolve this highly complex issue for a first time Nano user - I had to go to my osteopath. He showed me that the docking plug has 2 tiny clips to press when you want to release. Of course, such a comlex piece of technolgy doesn't get a mention in the basic booklet and none of you guys could imagine anyone reaching such heights of technological details.
    thanks anyway

Maybe you are looking for

  • How to cast a parameter from ${bindings.myParam} which is Number to String

    I have a button which sets a param in request so I do sth like this in event on uix page: <set property="param_id" target="${requestScope}" value="${bindings.myParam.attributeValue} "/> but that myParam is Number (not String). And I have java.lang ca

  • Retrieving attachments in hcm processes and forms

    Hi Experts, We have implemented HCM processes and forms and in one of the custom processes which we have created. We have an attachment option where the user attaches the document and the document is reviewed by the approver. But how does the adminis

  • How to make proper page to load

    URL: www.madmoose.com I set this site up 9 years ago in a framset - one for the nav bar and one for the page to be viewed.  Used to be that all the browsers would load the home page when you eintered the site URL (www.madmoose.com), but when you clic

  • Pnputil - failed to install the driver

    Hi, I run cmd as admin, windows account is too admin, directory is OK, but I still can not install driver (for StarSign CUT device). Driver is official, and if I install driver in Explorer, everything is OK.  Windows 8.1 64bit, last upadate. HP 350 G

  • How do i export the table data based on some condition for backup

    Is is syntax correct exp scott@orcl92 file=emp_29aug.dmp tables=emp query=\"where emp_no in (1,2,3,4) \". How do i take the backup of more than one table? what is the syntax for that Thans