How do i get my ipod to open!

I'm stuck in download mode !an cant get out i even tryed restart! HELP!!!

So you have held the Sleep/Wake button and the Home button down (at the same time) for at least ten seconds. Are you saying that did not cause the iPod to restart? (It should!)

Similar Messages

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How do I get my ipod to quit repeating the same song over and over?

    How do I get my ipod nano to quit repeating the same song over and over again?

    The control for repeating a selection is available when the Music app is open and the iPhone is in the portrait position. There are three settings Off, repeat one song and repeat album or playlist. You change the setting by tapping the icon.
    OFF
    Repeat one song (current selection)
    Repeat album or playlist

  • How to I get my ipod connected to wifi for the first time..it's an ipod tough 2010 version, refurbished

    how to I get my ipod connected to wifi for the first time..it's an ipod tougch 2010 version, refurbished

    Hi,
    To connect your iPod to wifi just:
         1. Open settings,
         2. Tap Wi-Fi,
         3. Make sure the Wi-Fi switch is on,
         4. Tap the network you would like to connect to,
         5. If  the network has a password then type it in and press join.
    For hidden networks(networks that don't broadcast their SSID(name))
         1. Follow 1-3 above,
         2. Tap other,
         3. Type in SSID(name) of the network,
         4. Select the security of the network,
         5. If there is a password type it in,
         6. Press Join.
    Some public networks may now show a login screen where you  may have to agree to terms and conditions, enter your email etc...

  • How can you get your ipod touch serial number from apple beacause my ipod was stolen

    how can i get my ipod serial number from apple

    http://support.apple.com/kb/HT2526?viewlocale=en_US
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

    How do I get a folder to open up in Final Cut Pro version 6.  I'm on a MAC OS X Version 10.6.8.  The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive.   When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found.  Unable to import this file."   When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file".  What should I do or what am I not doing? 
    Cliff

    YYou should ask this question on the Final Cut Studio forum.

  • I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed.

    I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed

    right click the executable > click 'run as administrator'.

  • How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

    How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

    Hi
    Please take a look to this thread Re: Can I refresh the browser rather than open a new tab?

  • How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)

    How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)
    So I'm adding new songs to a very old playlist? Is there anyway that when I add them, they automatically go to top of playlist? How about getting one song to the top of a playlist.  That drag to arrange function is very annoying because it is slow and the playlist does not scroll up very well on a PC.

    Make a new playlist by pressing the little plus button at the very lower left corner of iTunes. An new playlist will appear in the Source pane called "untitled playlist". While the name is highlighted, you can change it to whatever you want. Drag all of the tracks from all the albums that comprise a single book to that playlist. Sync that playlist to your iPod.

  • I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting

    I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting

    See KB Article:  How to use your iPod to move your music to a new computer

  • How do I get IE 11 to open in the same window on the task bar?

    How do I get IE 11 to open in the same spot on my task bar.  i.e. IE 11 is on my task bar. When I open it, it opens in a new place on the end of the task bar.  Microsoft Outlook, Windows Explorer, Quicken, Adobe, etc,, all on the task bar open
    right at there location on the task bar; not in a new place at the end of the task bar.
    How do I get IE 11, Windows 7, 64 bit to open at the same place as the IE icon???
    Thanks

    Hi,
    Seems a strange issue, How about un-pin IE from the taskbar, then re-pin it to the taskbar for a test?
    If doesn't work, I suggest you turn off IE 11 in "Turn Windows Features on or off", reboot PC, then re-turn on, check the result again.
    Regards
    Yolanda Zhu
    TechNet Community Support

  • One laptop died.  I have a new laptop now.  How can I get my Ipod song list on the new laptop without downloading each c.d.?

    My first laptop died.  I have a new laptop now.  How can I get my Ipod song list on the new laptop without downloading each c.d.?

    See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod to your PC.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • How do I get CurrentVersion.fcpevent to open in 10.1.1

    HI,
    I backed up files a while back of my FCPX files to a server. I have a project i need to reopen and edit. In the latsest version of FCPX, it will not convert open or import. How do I get this project to open up and allow me to edit or update the file?

    You can't open that file. Assuming the event that it is part of was created in an earlier version, the event needs to be in a folder named Final Cut Events. Any projects associated with that event need to be in a folder named Final Cut Projects. When FCP X 10.1 is opened, if you go to Update Projects and Events and then navigate to the drive where these folders live, it should create a new library for them.
    Russ

  • I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?

    I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?

    To move a home folder, create a new home folder, copy the contents of the old home folder into the new home folder, and then delete the old home folder.  Take a look at this link, http://manuals.info.apple.com/en_US/UserMgmt_v10.6.pdf

  • I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    You did install the latest iTunes (10.5) right?  If the problem was that iTunes does not see the iPod try:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Maybe you are looking for

  • Problem with External Hard Drive - Firewire

    I have a problem with a *300GB Venus DS3 Hard Disk* / USB 2.0 - Firewire 400 (not sure if 400). I have a +Mac G4 (1GHz Power PC G4 / 1GB DDR SDRAM)+ running +Mac OS 10.3.9.+ I connect Venus hard disk through USB cable and no problem. But when I want

  • Visual attribute for current item

    How can i set the visual attribute of the current item in multi block form so that when user navigate through item in a form its background colour is changed and user can easily trace where the cursor is ?

  • Okay, so now I cannot view photos

    Trying to put up a web with photos has been a challenge....I get it but yet I don't. All I want to do is share some kids sports photos with other team members.... Can't seem to get the album I created in iphoto to transfer to a group or .mac site....

  • [Ask] Print user defined Field

    Hi guys, need some help here.... Can I print user defined field? If it can, how? thx guys...I really need it

  • Can't find the Setting for Touchpad on Elitebook 820

    Hi, I have an elitebook 820 with windows 7. I would like to know how i can change setting of the touchpad on the laptop. I looked in the control panel but there is no touchpad menu. i found on other discussion that the touchpad setting can be found i