How do i get my ipod touch to play on the car radio

How do I get my Ipad touch to play through the car radio?

You can buy something like this Belkin Cable here, which I use, and plug it into your car's Aux port if it has one. They can also be found in most electronics stores.
If your car doesn't have an Auxillary port, you can buy something like the Griffin iTrip, which allows you to set your iPod to transmit on a specific FM frequency, and you can just tune your car to that station. You can find that anywhere electronics are sold.

Similar Messages

  • When I try to download anything from iTunes or the app store on my iPod touch, my sister's Apple ID comes up instead of my Apple ID. How can I get my iPod touch to ask for the password for my Apple ID rather that of my sister's.

    When I try to download anything from iTunes or the App Store on my iPod Touch, my sister's Apple ID pops up instead of mine. How can I get my iPod Touch to display my Apple ID and ask for my password rather than display my sister's Apple ID?

    You can try to tell the iPod to use yours:
    1. Tap Settings
    2. Navigate to "iTunes & App Store"
    3. Tap Apple ID:
    4. Tap "Sign Out"
    5. Sign in to your account.

  • How can I get my iPod touch to display all the artwork on my computer?

    Hi,
    I have an iPod touch 4th gen 32 GB with iOS 6.1 on it.  I have trouble getting it to display all the album artwork that I have on my computer.  Not all of my music has it, but about 90% of it does.  Is there any way I can make it display everything that's on my computer?  I have iTunes 11 on it and it is a Windows 7 computer.  Thanks!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How do i get my ipod touch to look like the way i bought it

    i went to the library and updated my ipod touch but my coputer at home doesnt have internet but it has the itunes with all my songs on it but when i plug my ipod in it says it doesnt recognize my ipod because the itunes that i have is not the latest version and now i cant get the song that are on my computer onto my ipod is there any way that i can get a flashdrive and put the updated version in there to transfer it to my ipod or is there anyway i can rest my ipod to look like the way i first bought it with the original software

    You can uninstall the iTunes software and then reinstall it. Then copy and paste the old library you had to your computer at home. It should sync automatically and should be updated.
    Business is the game!!

  • How do I get my iPod touch to work after the update?

    I updated my iPod touch with the new software. I went through all the steps like my location and language and such and I chose to "Restore from iTunes backup". I tap next and connect to iTunes on my computer. It syncs my things and my iPod still says 'connect to iTunes'. I already did that! What do I do?
    Help!

    This sounds like your problem:
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • How do I get my iPod nano to play through the list several times in a row?

    I am not sure if you did understand the question because my english *****...
    The point is that when i am listening to music the music just stops when the list is played through... I know that i can fix it so it starts over again, but I don't know how!
    It is driving me mad! Please help me..

    Go into settings and select repeat.

  • How can I get my iPod touch music in computer and then to my iPhone. My computer was stolen so I will be using another computer

    How can I get my iPod touch music in computer and then to my iPhone. My computer was stolen so I will be using another computer

    Start Here:
    http://www.apple.com/support/ipodtouch/assistant/itunes/
    And See Here:
    http://www.apple.com/support/ipodtouch/

  • How do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!

    how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)

    Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question.  Not all apps have all options.

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How can I get my ipod touch to turn on or to charge?

    How can I get my ipod touch to turn on or charge?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How do i get my ipod touch to work after i downloaded itunes and plugged it in?

    How do i get my ipod touch to work after i downloaded itunes and plugged it in?

    This sounds like your problem:
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • How do i get my ipod touch to work if i have not used it in a while

    how do i get my ipod touch to work if i have not used it in a while. we have not used it in about 4 months and it does not charge or turn on

    If you can connect the iPod to a computer you can restore using iTunes >  Apple - Support - iPod touch - Restore Troubleshooting Assistant

  • How do i get my ipod touch to work in window 7 64bit

    how do i get my ipod touch to work in window 7 64bit

    Assuming you mean that the iPod does not appear in iTunes on your computer. see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • How do I get my ipod touch 5th generation to always use my car speakers when I plug it into the USB port?

    How do I get my ipod touch 5th generation to always use my car speakers when I plug it into the USB port?

    If the problem occurs after you restore it to factory defaults/new iPod then it is likely a hardware problem.  I would make an appointment at the Genius Bar of an Apple store.

  • How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred

    How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred.
    Been trying all night to sort out but just going around in circles

    I have not seen a solution for that error but try:
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

Maybe you are looking for

  • I am getting following error

    1 am running this jsp file in eclipse <html> <title>JSP Demo</title> <body bgcolor="blue" text="white"> <!-- DIRECTIVES --> <%@ page language = "java" %> <%@ page import = "java.util.*" %> <%@ page contentType = "TEXT/HTML" %> <!-- SCRIPLETS --> <H1>

  • PS CS4 menu bar sometimes disappears (parts of it)

    Now and then, part of my menu bar disappears - the section just to the right of "help" - I think the first icon for this particular bar is to open Bridge. I've included a screen shot of my issue - notice that area seems to show my desktop (or whateve

  • "Network Error - 53" while trying to mount NFS share in Windows Server 2008 client

    CentOS | Windows 2008 I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on. I'm able to succes

  • Problems with Tiling Using Illustrator CS6 to Create a Half-Drop Repeat

    Okay...I had a different issue in PhotoShop CS6, but found some great advice and that did the trick. Here's a screenshot of what I'm experiencing using swatches to fill an artboard that is 45" x 36" (fabric width/length): I did the offset for the ima

  • Force Metadata Browser to update

    When importing from a CF card and copying as DNG, I see the following: If, after import, I select images and add City, State, Country info, the metadata browser still shows Unknown Country>Unknown State>Unknown City groupings that contain these same