How do i get my ipod unlocked when in diabled mode?

how do i get my ipod unlocked when it is in disabled mode? After several attempts to put password in.I have already been on Itunes and restored an updated everything and still wont work.

Restore.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Similar Messages

  • How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred

    How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred.
    Been trying all night to sort out but just going around in circles

    I have not seen a solution for that error but try:
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • How do I get my iPad unlocked when iTunes doesn't work to restore? Thanks!

    My iPad is disabled due to me not remembering the passcode and attempting too many wrong guesses. I have gone through the "restore device" procedure on iTunes but I get error messages that my device is not eligible. How do I get my iPad unlocked? Thanks!

    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • How do i get my ipod unlocked?

    My ipod is disable and it wont let me unlock it on itunes. How do i get it unlocked?

    Unfortunately, you must restore it in iTunes on your computer.   There is no way to retrieve a forgotten pass lock code.
    You will need to restore your device from the same computer that you most recently synced to, and restore the device. See - http://support.apple.com/kb/HT1414.
    If it has been disabled after entering the wrong passcode - http://support.apple.com/kb/HT1212.

  • I frogot my passcode, how do i get my ipod unlocked?

    i need into my ipod and I forgot my passcode.

    Locked Out, Forgot Lock or Restrictions Passcode, Need to Restore Your Device: Alternative Solutions
        1.  Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
        2.  Use iTunes to restore your iOS device to factory settings - Apple Support
        3.  About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
    If all else fails: Place your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How do I get my iPod out of the recovery mode loop?

    While I was updating my iPod Touch 5g (32GB) to the latest iOS 6.1, the USB by mistake got ditached from my mac and the iPod's screen turned to a USB pointing towards the iTunes logo(Recovery Mode). It showed the same thing when I restarted it around 10 times. After connecting it to iTunes it said that "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." After pressing OK on this message the screen I get on iTunes is of an iPod with the name "iPod" and not "Akshat's iPod". It says "iPod Recovery Mode" and has a button to restore. On pressing the restore button a message comes up to confirm the restore and the buttons are "cancel" and "Update and Restore". On pressing "Update and Restore" it searches for a latest software for the iPod and tells to download iOS 6.1 and after pressing download it happily take 4-5 hrs and gets dowloaded. Now, during this downloading period, the iPod keeps restarting on itself and the same message "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." appears and after pressing OK it doesnt affect anything but this comes up more than 10-15 times. After the software download the status bar says "processing the download" and this continues for as long as we wait(i.e. it only stops when we press OK when the next message of recovery mode appears). The status bar again shows the apple logo. After this I have to again press the button of Restore iPod>Restoe and Update>Download iOS 6.1 and so the same procedure follows. I have done this about 5 times now, each time taking about 6 hours. I still haven't updated or restored my iPod. I can't get it to waork! This description is too long but I would appreciate if you would help me find a solution for this problem.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How do i get my ipod touch out of recovery mode

    i originally had all of my music & apps on itunes on our computer, but our computer broke. so i connected my ipod touch to our macbook and updated to the new itunes, then backed up my ipod onto the mac. after that, i synced my apps onto the mac but i don't think i synced any of my songs (unless it automatically already did that when i backed it up?) i couldn't find my songs anyway since i don't really know how to use the new itunes ... then i tried updating to iOS 6 but it had some error and said it was error 6. on my ipod, i can't do anything because it tells me to connect to itunes. but when i connect my ipod to itunes, it says my ipod's in recovery mode and i need to restore it. i don't want to restore it and lose all of my apps, photos and songs. how do i get out of recovery mode?

    You have to restore. for error 6
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    You can restore from backup if you have one.
    iOS: How to back up

  • My daughter forgot her password for her IPOD so now it is locked and it's saying connect to itunes but when i bring the account it say the ipod is locked  how do I get her ipod unlocked

    hi can anyone help me with this?

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How do i get in ipod touch when i forgot passcode, how do i get in ipod touch when i forgot passcode

    how?

    It must be wiped and restored. If you are not able to remember your password, then you loose everything.
    Connect it with itunes and press the restore button.

  • How can I get my Ipod engraved when I already have it?

    My sister has hers engraved and mine would look so pretty with my name on it:D

    Any jeweller store can do it for you, as long as it doesnt cover the Apple Logo, GB's, or Serial number and information at the bottom hope this helps!
    HW

  • How can you get an ipod touch out of recovery mode?

    I have gone through the various trouble-shooting guides and nothing seems to work. The ipod does not appear in Computer, checked the cable, my iphone does appear. It is detected by itunes as being in recovery mode but no serial no appears in box, I click on restore, it begins extracting software on finishing this I get an error 3014 message, clicked on more info and went through procedures still the same problem ipod locked on usb cable/ itunes logo.
    Any ideas would be much appreciated.
    Yours, Keith

    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.

  • My iPod is disabled it says connect to iTunes, I connect to iTunes and nothing happens. How can i get my iPod to unlock.

    How can i get my ipod unlock. It says iPod is disabled connect to itunes, when i connect to itunes from my computer nothing changes on the ipod.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting

    I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting

    See KB Article:  How to use your iPod to move your music to a new computer

  • When I want to get an app, an error message comes up saying I need 3.0 software update.  How do I get my ipod updated in itunes, when itunes says my ipod is already updated?

    When I want to get an app, an error message comes up saying I need 3.0 software update.  How do I get my ipod updated in itunes, when itunes says my ipod is already updated?
    OR if I cannot update to software 3.0, how can I find apps that will work just for my ipod touch?

    It sounds like you have a 1G iPod Touch, in which case you can only upgrade to iOS version 3.1.  Here is a link to purchase the update.
    http://support.apple.com/kb/HT2052
    B-rock

  • When I try to download anything from iTunes or the app store on my iPod touch, my sister's Apple ID comes up instead of my Apple ID. How can I get my iPod touch to ask for the password for my Apple ID rather that of my sister's.

    When I try to download anything from iTunes or the App Store on my iPod Touch, my sister's Apple ID pops up instead of mine. How can I get my iPod Touch to display my Apple ID and ask for my password rather than display my sister's Apple ID?

    You can try to tell the iPod to use yours:
    1. Tap Settings
    2. Navigate to "iTunes & App Store"
    3. Tap Apple ID:
    4. Tap "Sign Out"
    5. Sign in to your account.

Maybe you are looking for

  • Sending a dom via http Post

    Hi, for some reason unknown to me whenever I try to send a dom via http Post I get the following error: org.xml.sax.SAXParseException: The root element is required in a well-formed document. This is the source code: package com.cyberrein.payunion.tra

  • Unable to install DM6 - asks for Microsoft Visual Basic+++2008 Redistributable

    Laptop Dell 1764 Win7Pro - DM5. Just got a 9900 Bold yesterday to replace my Tour 9630.  I attempted to install DM6 and received the same error message I received when I had tried to install DM6 a few months ago.   I click file 610_b034_multilanguage

  • Is Exception Handling  in every Java code?

    Hi there, just curious, is including exception handling the "norm" for any Java code?

  • Quicktime Audio Disappears after Publishing

    Hi - I'm using iWeb 09; I have long been using iWeb to publish my website - part of that has been uploading mp3 files for people to listen to. My problem is suddenly my files, which play perfectly in iWeb, don't even show up on the page after I publi

  • Simultaneous installation of CS4 and CS5 elements

    Currently we have an installation of InDesign CS4. We are looking to purchase CS5 Design Standard which we can upgrade to from our installation of InDesign CS4, saving around £400. The issue we have is that we have a third-party plug-in for InDesign