How do I get my itunes to start working again?

ITunes.exe- Bad Image
C:\Windows\system32\odbcint.dll is either not designed to run on windows or it contains an error. Try installing the program again using the original installation method or contact your system administrator the software vendor for support. 
Then I press ok and it says,
Ituens was not correctly installed Error 7 ( windows error 1114)
ITunes has stopped working correctly. Windows will close the program and notifiy you if  a solution is available
I've tried uninstalling, and reinstalling iTunes like 5times it either doesn't finish or does and then the same message happens when I open it.
So now i have no idea what i should do.

Try Recovery Mode.
Read this: http://support.apple.com/kb/ht1808

Similar Messages

  • How do i get my IMessage to start working again?

    how do i get my IMessage to start working again?

    update software, check your phone number is in.

  • How do i get my camera to start working again?

    how do i get my camera to start working again? i've restored it before and its still not working. HELP!!!!!

    If you have accomplished all of the user troubleshooting, which consists of power off/on, reset, restore from backup, restore as new and the camera still does not work, that is indicitive of a hardware problem and would require you to make a Genius Bar appointment for them to look at the device.

  • TS3430 I tried all of this and nothing worked. How do I get my Itunes back and working again????

    Apple
    Store
    Mac
    iPod
    iPhone
    iPad
    iTunes
    Support
      Languages       
    iTunes 11.1.4 for Windows: Unable to install or open
    Symptoms
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution Follow these steps to resolve the issue: Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Important: Mention of third-party websites and products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance or use of information or products found at third-party websites. Apple provides this only as a convenience to our users. Apple has not tested the information found on these sites and makes no representations regarding its accuracy or reliability. There are risks inherent in the use of any information or products found on the Internet, and Apple assumes no responsibility in this regard. Please understand that a third-party site is independent from Apple and that Apple has no control over the content on that website. Please contact the vendor for additional information. 
    Last Modified: Jan 29, 2014
    Helpful? http://support.apple.com/kb/TS5376#
    Yes   No
    Related
    iTunes 11 for Windows: Import music and video already on your computerAdd items from your computer to your iTunes library Drag a file or folder from the desktop to the iTunes window. If you add a folder, all the files it contains are added to your library. In iTunes, choose File > Add to Library, locate a file or folder, and click Open .
    iTunes 11 for Windows: Add artwork to songs and other itemsAdd artwork to music and video Click Add, select an image file, and click Open . Drag the art file to the artwork area.
    iTunes 11 for Windows: Use Genius Shuffle, Genius playlists, or Genius MixesKeep your Genius information up to date Your Genius results are automatically updated once a week when iTunes is open . You can update them manually—for example, when you add new music to your library from a CD or a website.
    iTunes, on my PC, is responding very slowly.I just updated downloaded and installed iTunes 11 .0.1 on my Windows XP professional PC and all seems OK until I try to access iTunes Store or attempt to turn on Home Sharing or try to do anything where iTunes has to connect to Apple. It takes forever to respond to a mouse click and then all you see is the candy cane line which never stops even after 30 minutes. Has anyone experienced this?
    Can't move my mp3 files Using my new asus notebook with window 8 and iTunes 11.0.2 version.This is a visual cue that iTunes will link to the files in their current locations. Contrast with the behavior when the files you are adding are located outside
    Can I sort album by year in iTunes 11?View>View options or command+j ... Now, if they would have added multiple genre tagging, I would be in heaven... ... For those on Windows you can use Ctrl+J to access that menu.
    Additional Product Support Information
    iTunes 11 for Windows
    Start a Discussion 
    in Apple Support Communities
       See all questions on this article See all questions I have asked  
    Contact Apple Support Need more help? Save time by starting your support request online and we'll connect you to an expert. Get started  
    Home >          Support 
    Shop the Apple Online Store (1-800-MY-APPLE), visit an Apple Retail Store, or find a reseller.
    Apple Info
    Site Map
    Hot News
    RSS Feeds
    Contact Us
    Copyright ©  2014 Apple Inc. All rights reserved.          
    Terms of Use
    Privacy Policy

    The program can't start because MSVCR80.dll is missing from your computer
    Many thanks. Rather than the Apple document, I currently recommend using the instructions from the following user tip with that one:
    Troubleshooting issues with iTunes for Windows updates

  • How can I get my applications to start working again?

    Hey y'all
    I have the iPod touch and I've downloaded about 9 applications. The applications worked for a little while but now the apps aren't working. I press the button for the app, the application runs for a few second but the screen goes back to the home or start page.
    Is there a way I can fix this problem?

    I have got my apps working properly,
    I deleted all the apps from the app store off my ipod touch.
    Then deleted all the apps in my itunes library(moved them to the trash when asked), then plugged my ipod and let it sync,
    went back to the app store and clicked buy again on Suoer Monkey Ball, a message will popup saying " you have already purchased, download for free"
    It is now working and I am installing the free apps one at a time and checking each one after download, all seems to be ok so far.

  • How do I get my mail to start working again?

    As soon as I downloaded Mavericks, I was unable to open Mail. I downloaded the 11/7/13 update, shut down the computer, and rebooted it and I still get the same error message, "Mail quit unexpectedly. Click Reopen to open the application again." But when I click Reopen, I just get the same error message again.
    I have my gmail sent directly to mail and now I can only access it via the web. Totally frustrating. Can I get my old operating system back?

    If you have accomplished all of the user troubleshooting, which consists of power off/on, reset, restore from backup, restore as new and the camera still does not work, that is indicitive of a hardware problem and would require you to make a Genius Bar appointment for them to look at the device.

  • How do you get your imessage to start working again after getting IOS6? On your ipod

    I recently updated my ipod 4th generatiom to IOS6, imessage was first working great and now it has seemed to stop working... Does anyone know how to this fix this? Iv tried resetting the network connections and signed in and out of imessge

    See if this discussion helps:
    iMessage won't work after iOS 6 upgrade: Apple Support Communities

  • After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?

    How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?

    Oh, and it is on a macbook pro

  • How do I get my iTunes Store to work on my iPad?

    How do I get my iTunes Store to work on my iPad?

    Assuming that you mean that you can't connect to the iTunes Store ....
    Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
    Or try this ...
    Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
    Or this ...
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or .....
    Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ....
    Reboot your router. Unplug it from power for about 30 seconds and then plug it back in again.

  • Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

    Acrobat Pro X will not open today. I used it a few weeks ago, and the rest of my CS6 Suite of programs are working. How do I get Acrobat Pro X to work again?

    Please refer
    Doesn't launch after 30 days | Installed as part of a CS6 suite

  • How can I get my home button to work again

    How can I get my home button to work again

    Well, if your Home button is broken, you won't be able to reset your phone, and if the Sleep/Wake button won't turn your phone on, it's a trip to the Apple store.

  • How can I get drag and drop to work again in iphoto11?

    I have created a photo book in iphoto 11 (version 9.3.2) on my imac running os 10.7.5.  The drag and drop feature suddenly quit working. I cannot drag/drop photos from an event into the photo book OR within the photo book.
    I've restarted the computer to no avail. I've also quit and restarted iphoto.
    When I run Console, I see the following errors: iphoto: coredragcrete error -4960 and error in coredragdispose -1850
    What should I do to get my drag and drop working again?

    Repair permissions with Disk Utility.

  • Itunes asked me to do an update- I did- it will no longer load. How can I get the itunes program to work?

    Itunes has onced worked on my computer with previous settings. I was asked by Itunes to make a necessary update, which I did. Now Itunes will not work on my computer.

    atoo2 wrote:
    I just did the IOS8 update on my Ipad retina which had 300  photos it asked me to do an iCloud back up which i did but it deleted all my previous photos and now i only have recent photos how do i get back all my old photos? It said befor that my icloud was out of storage but i didnt know it didnt have my old photos, they arnt back up on itunes either is there any way I can get them back?
    Please see the bold.  If you're out of icloud storage, then you won't be able to backup to icloud unless you purchase more storage, but yet you said you backup to icloud.
    If you really did backup to icloud no data would be loss - sounds to me that it didn't backup since you had no more free icloud storage space.
    iCloud: iCloud storage and backup overview

  • How can I get my iTunes remote to work on my laptop?

    I have a remote for my desktop that controls iTunes on it, however I rarely use it because I recently got a Macbook Pro.  How can I get the remote to control iTunes on my Macbook? 

    The desktop remote will only work with your desktop.  If you purchased a new Macbook Pro, its remote is sold seperately.
    At one time, the remote was included.  Unknown when it all changed. 

Maybe you are looking for

  • Compare and test values in two tables

    hi everbody, I use oracle 10g I have a table for large itemsets called L shown below with values ITEMS CODE b 1 c 2 d 3 e 4 d:e 5 b:c 6 I generate all candidate combinations firstly 2-sequences for in code field values for that I use below code selec

  • Large VHD being detected as 136.8GB in VM

    I created a 600GB dynamic VHD and am using clonezilla to migrate my data to it.  In clonezilla it only sees the VHD as 136.8GB so I cannot restore my data to it.  Is this just a limitation of dynamic VHDs?

  • Help required: Error when execute the Interface.

    hi, i am loading data from RDBMS(Oracle) to Essbase(Target). but when i execute the Interface it throw the exception in Operator. ODI-1227: Task SrcSet0 (Loading) fails on the source ORACLE connection Red_ORA_SRV. Caused By: java.sql.SQLSyntaxErrorEx

  • Problem with creating links with the WPC (SP14)

    Hi, I have a problem creating links with the WPC (SP14): When I want to create internal links (Browse and select the target item) via the right button (choosing a website as a reference link). If I do so I encounter the problems either that the linke

  • Maximize Code Reuse Between Windows Phone 8 and Windows 8(via Microsoft Dev Center)

    Win8 App Developers: Picked this up on the Microsoft Dev site..great tips for reusing code between your Windows 8 app and Windows Phone. Summary: In this section, we will help you make the right choices to maximize code reuse in your apps. As a devel