How do I get my layer mask to work properly
I have Photoshop CS6 64bit I duplicated the layer and applied a Gaussian blur. I created a layer mask and when I brush over the layer it does not reveal the mask - how do I correct this?Layer Mask
It is hard to tell with out seeing what you have. But black is reveal and white is hide, with grays being the variance of the two. It would not reveal the mask, it would reveal the lower layers. I assume that what you meant, but I added it for new users reading this thread.
Similar Messages
-
How do I get my imported form to work properly in Dreamweaver?
Our client has requested that we import forms directly from their old site to the new one we are creating for them. To clean the form up it was necessary to insert a table within it and reorganize the fields and titles. Unfortunately when I test the form out the confirmation page does not show the input information.
For example: Here is the original (old) form http://www.co.dekalb.ga.us/parks/contactus_form.htm that is currently active now. If you enter your information it goes through to the proper recipient and displays a confirmation page with all of the contact information you entered.
Here is the newly designed page in which the old form information has been imported from the code. http://www.graphicmechanic.com/DEKALBCOUNTY/departments/parks-and-recreation/pr-contact-us .html
After being imported from the original source code and redesigned in Dreamweaver this form doesn't work properly. When I preview it on the server, fill in the fields and click submit, the confirmation page shows up with all of the field names but none of the information I've input.
Can anyone take a look at the code and let me know what it may be missing or what I may have messed up when I reformatted the design of the table? Thanks in advance for any solution you can offer.It is hard to tell with out seeing what you have. But black is reveal and white is hide, with grays being the variance of the two. It would not reveal the mask, it would reveal the lower layers. I assume that what you meant, but I added it for new users reading this thread.
-
How can i get my n97 back to work properly?
Hi everybody!
I need some help, i don't know what to do with my n97...
I have updated its firmware every time was needed, i've done a lot of hard resets, i've free a lot of space in C, a lot of RAM memory and....it keeps randomly freezing!!
After six months dealing and struggling with it, i can say some sure things:
-I think it's a software problem, because every time i do a hard reset, it works perfectly without freezing for a while. Always after a reset all works fine, and always a while after, even if no aplication were installed, the phone start freezing.
-It worked quite good before the famous kinetic scrolling on firmware v20. Sometimes i try to select an option and the menu scrolls down again and again. I suggest that kinetic scrolling is optional in next firmware revision OR have the chance of downgrading the firmware through NSU, so i can install the firmware that works better for my device.
Does anyone has fixed this problems?i can't use this phone, i use it as a very expensive 32Gb portable hard drive, while i daily use my old n95 8gb, a very reliable phone.
Thanks in advance!
Edit: By the way, any news on firmware update?If you've followed the troubleshooting steps in the article that you were reading, then you will have to go into the Apple Store or contact Apple Support to get a repair/replacement set up.
-
How can I get "Edit in Photoshop" to work properly again?
Hi all,
I purchased and upgraded to Lightroom 4.0. Got things to work fine with some ACR updates for Photoshop CS3 that I'm currently using. Now have ACR 4.6 installed (the latest for my version of PS) as well as ACR 6.7.
I was able to make edits to the DNG RAW files in Lightroom 4.0 and then choose Edit in Photoshop (Command-E) and see those changes in a PSD file in Photoshop, where I could make further changes.
All of a sudden, I went to edit a photo in Photoshop and saw the original DNG file with no Lightroom edits. Some tinkering and update to Lightroom 4.1 but nothing can seem to make it show those Lightroom edits now when I go to Photoshop.
How did this break? How do I fix it?
Mac OSX 10.7.3
Photoshop Lightroom 4.1
Photoshop CS3 Extended 10.0.1My Lightroom 4 was doing a fine job rendering my changes to the RAW file as a PSD on the way into PS, especially after I downloaded Adobe Camera Raw 4.6 for Photoshop CS3. Then it just stopped, with no warning. To try to fix this problem, I downloaded ACR 6.7 and also LR4.1, but it's still just opening the DNG file when I run Command-E to edit in Photoshop CS3.
When I use Adobe Bridge CS3 to see the changes I've made in LR4.1 (especially after saving the metadata to the file with Command-S), it shows the updated changes but when I then open in Camera Raw or Photoshop, they're gone.
Thoughts? I'm worried because Command-E in LR4.1 just opens the DNG without modified changes instead of the PSD file as was customary. -
How do i get my video chat to work properly ?
when i video chat with another person they can see me and there self in there video chat box , but in mine i just see myself, not the other person, now if i use skype i have no problems , but some of my facebook freinds do not have skype, so how can i fix this problem ?
Hi,
Video chat where on Firefox? You need to elaborate on the issue so we can better assist you.
Thank you! -
i am trying to use the clone tool in photoshop elements on a mac book pro and every time i do it brings up the brush pallet
No you don’t need to uninstall iPhoto but are you trying to edit a photo from the iPhoto Library?
If so export a copy from iPhoto to the desktop and then open that copy in the Elements editor. -
PSE 6 for Mac, how to install the new layer mask tool
I just bought the new PSE 6 for Mac, whew what a change in the color of workspace.
My classmates and I are wondering how to install the free layer mask tool that Sue Chastain has on her About site.
Or perhaps first, has anyone used it and do you like it?
Do you put it here?
http://www.jcarter.net/mac-stuff/layermaskthing.jpg
Havent been to this great forum for a while, been busy, I miss you all, and shall try to visit more often.
I remember when I was a beginner at this, I learned so much here and you all were amazing help!
Thanks,
JaneHi Barbara,
Its this one,
http://graphicssoft.about.com/od/pselements/p/layermasks.htm
So I assumed afterwards that it wasn't for Mac. So I went ahead and installed the older action for my PSE 4.
I was hoping it was platform agnostic, but when I looked at this, the difference between the 2 versions,
http://www.jcarter.net/mac-stuff/previewfolder-missing.jpg
Not knowing where the Previews folder was, threw me overboard.
And I didn't read all the way down Sue's page, as my old brain got ahead of my eyes.
So I really dont know what to do next with this, some of my classmates are wondering the same thing.
Thank you,
Jane -
How do I get the subnet mask for each IP address my host supports in Java? I need to get this so I can send a local broadcast on a specific subnet.
Thanks,
Doug GroverActually on windows you are probably going to beusing
ipconfig."ipconfig" will give you the values for each network
interface on your machine bound to the TCP/IP
protocol.
"route print" will print the windows routing table for
the network the machine is on.
Quoted from the Microsoft web site, "The routing table
is built automatically, based on the current TCP/IP
configuration of your computer. Each route occupies a
single line in the displayed table. The routing table
is searched by your computer for an entry that is the
most specific match to the destination IP address."
Yes I know what it does.
In most cases when someone wants this information they use ipconfig.
Although your suggestion does work on older boxes as well. But the result is somewhat less evident. -
I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.
Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?
Oh, and it is on a macbook pro
-
How can I get my web cam to work in Adobe Connect ?
This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem? Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine. Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746. -
How can I get iCloud to accept my working Apple ID and password
My Apple ID and password works for iTunes and App Store. I'm trying to set up iCloud on my iPhone and iPad but i keep getting an error message that reads unsupported ID. Apple ID must be in the form of email address (@me.com). I don't have a MobileMe account. How can I get iCloud to accept my working Apple ID and password?
I've also reset my password to my Apple ID. I still get the Unsupported ID and password.
-
I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4. I plan to travel and want to take my netbook, rather than the laptop PC for travelling. How do I get my apple tools to work mwith a new, temporary PC?
ayorico15 wrote:
It's not the pictures I'm worried about. I can get them off my phone without iTunes.
You can export ONLY Camera Roll photos and videos.
ayorico15 wrote:
All my apps were downloaded from my new apple ID. Not his.
Sign in to iTunes Store (on desktop itunes) with your ID. Plug your iphone to itunes, right click on it and choose transfer purchases.Right click again and choose backup. Then you can sync with iTunes.
ayorico15 wrote:
It's not the pictures I'm worried about. It's all my saved conversations
Your conversations will not deleted if you sync with your iTunes.
What is the problem with iCloud? iCloud has nothing to do with iTunes syncing. -
How do I get the RSS feeds to work in iWeb'08 when published to FTP server?
There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
The published website is www.vibrationalvoyages.com.
When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG
Maybe you are looking for
-
New Payment display Closed invoices and amount error ?
Hi experts, Help, I have a serious stupidity after data migration, I changed the invoices by SQL and at a new payment document it display the invoices already closed and their amounts not corresponding with the real invoices amounts or or retrieves t
-
GR/IR Clearing Account schedule in FBL3N
Dears: I need PO number in FBL3N line item wise against two clearing accounts (Goods Delivered but not yet invoiced and Goods Invoiced but not yet Delivered). Actually we need to prepare account schedule at month-end for above accounts which hit duri
-
my iphone is not turning on its freeze on the black screen with the apple
-
Hi there I am a designer of 14 years experience. When I start a site I usually mess about with text, backgrounds, sizes, alignments etc etc. I have been using CS4 now for a month and whenever I attempt to change font size, alignment etc, CS4 demands
-
My mac will not go through the set up
My mac air will not go to the setup option, it is stuck in a loop where it does the load up noise and then a load of writing then it restarts again