How do i get my nano out of disk mode

Hey my nano says disk mode ok disconnect i want to get ut odf this so i can listen to my music and answers?
Casey

Click the eject icon in the source list, next to your iPod. To turn it off permanently, go to iPod preferences and uncheck "Enable Disk Mode".

Similar Messages

  • I CANT GET MY NANO OUT OF DISK MODE!!!!

    i accidentaly put my ipod into disk mode and now i cant get it out. I tried turning it off but it doesnt do anything
    no clue   Windows XP  
    no clue   Windows XP  

    I am having the same problem - IPOD Nano gets stuck in Disk Mode. It won't respond to Reset, just stays locked up. The restore works, but this is the third restore I had to do this week. Am I doing something wrong, or is the IPOD defective?
    Or is this a bug with the IPOD Nano software, as I see there are a lot of these posts, but reset seems to help many.

  • How can I get my iPhone out of landscape mode and back to portrait?

    How can I get my iPhone out of landscape mode and back to portrait? Tilting the phone doesn't work.

    Try following - 1 by 1:-
    * make sure portrait lock is not on & try turning on/off several times
    * turn off mobile and turned it back on
    * hard reset by pressing lock and home at same time
    If problem persist, you need to try following but be careful since the following impact your iphone.
    * resetting all setting: this will reset all settings of your iphone back to factory setting
    * resetting all setting by erasing all data: this will reset all setting and erase all data so do back-up and proper syncing and read relevant details
    * restoring from itunes: this will also erase all data and take mobile back to day 1
    last 3 options are last resort and only be done if you are sure you can restore your data.
    Please don't hold me responsible for any data loss while doing last 3 options
    Cheers!

  • HT1688 How do I get my phone out of recovery mode? what made it go into this mode? I was just syncing it!!!!

    How do I get my phone out of recovery mode? what made it go into this mode? I was just syncing it!!!!

    It's impossible to say exactly why it went into recovery mode. To get it out, plug it into your computer running iTunes and restore it.

  • HT4623 how do i get my phone out of recovery mode without restoring it. I have nothing backed up to icloud and i really cant lose all of my data!

    how do i get my phone out of recovery mode without restoring it. I have an iphone 4. i have nothing backed up to icloud and i really cant lose all of my data

    You don't. Once it's in recovery mode, anything that was on the phone is already gone.

  • HT1430 How do I get my 3gs out of recovery mode without restoring it? I was in the middle of backing it up when it whent into recovery mode.

    How do I get my 3gs out of recovery mode without restoring it. I was in the midle of updating and backing it up when it went into recovery mode.

    In order to take the device out of Recovery Mode you have to Restore the device. There is no other way. Read here > http://support.apple.com/kb/HT1808

  • How do I get my phone out of recovery mode without restoring it through iTunes?

    I tried to update my software, and my phone went into recovery mode. Now it says to restore it through iTunes but when I try that, it says its unavaliable to restore. What do I do to get my phone out of recovery mode??

    You don't. What do you mean it says "unavailable to restore"? What is the EXACT wording of the message you're getting?

  • Can't get my ipod out of Disk Mode

    My iPod froze and was not being recognized by my computer. I got it into Disk Mode and now the computer is recognizing it but I can't get it out of disk mode.
    Any suggestions?
    Thanks!!!

    Reset it (hold down the menu and center button for 6 seconds)

  • HT4623 How do you get your Ipad out of restore mode

    How do you get your Ipad 3 out of restore mode? I ended up there by mistake.

    Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • How can I get my ipad out of recovery mode without losing all of my data

    I plugged my ipad into my laptop to charge, it went into recovery mode, I cannot lose my data.  How can I save my data and get out of recovery mode?

    Unplug it from your laptop and try a reset:
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
    If it goes back into Recovery Mode then unfortunately your data is already lost.
    Restore from your iCloud or iTunes backup.
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • How do i get my ipod out of recovery mode?

    It tells me to connect my ipod to itunes and when i do i says i need to restore and update my ipod so i click the button that says restore and update and within a few seconds it says error. I cannot get it out of recovery mode no matter how much i try or do.

    Maybe:
    Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    Also:
    https://discussions.apple.com/thread/4085740?start=0&tstart=0
    http://venktech.blogspot.com/2011/10/how-to-fix-ios-5-upgrade-errors-3002.html

  • HT201407 How do I get my phone out of recovery mode?

    How do I get my iphone 4S out of recovery mode?

    Connect it to iTunes and restore it.

  • TS1363 How can I get my phone out of recovery mode?

    How do I get my iphone 4 out of recovery when it says that it doesn't recognize my phone is connected to my laptop?

    Hey eburkett,
    Welcome to Apple Support Communities! I'd go through the following article, it'll help you troubleshoot and resolve your Windows PC not recognizing that your iPhone is connected:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    David

  • How do i get my phone out of recovery mode after updating it, how do i get my phone out of recovery mode after updating it

    how do i get my iphone of recovery mode? it went in to recovery mode after trying to update!!

    Try tinyumbrella. Connect your iphone, click on it when it appears in the recovery devices window, and click "exit recovery".

  • How do i get my iphone4 out of recovery mode?

    I attempted to update my iphone4 to the new update ios6 or whatever it is. It downloaded the new update and for some reason an error occurred and i had to restore it, so i thought yep okay righto. during the last stage of the restoring process ('restoring firmware') a popup comes up and says 'The iphone 'iphone' could not be restored. An unknown error has occured (-1).' So.. my iphone4 is stuck in recovery mode. I cant restore it to get it out of recovery mode.. So now it is just a complete brick.. Its been like this for 24hours and i have spent around 6 hours researching and playing around with it and i am now stumped, i spent an 1 on the phone to Apple and all they managed to solve was that there is a problem with the firmware. I have tried to restore it on another PC laptop and a Mac Desktop. I would greatly appreciate if anyone could please give me a soloution to fix this mess..

    Hello kazzi11,
    It sounds to me that your iPhone is already in recovery mode but when you connect it to iTunes the computer does not recognize it. If you have not already tried the steps in the following article to put the iPhone into into recovery mode, I would suggest that first. If the computer is not recognizing your iPhone when you go through the steps, be sure to follow the steps for Mac or steps for Windows link at the bottom of the article.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Thanks for reaching out,
    -Joe

Maybe you are looking for

  • Material extended-date wise report.

    We are extending QM view for some of the materials after a material is created (or) extended to a plant. There is a communication gap in intimating QM person regarding material created/extended details. Hence, thro' table MARA, QM core team member fi

  • How to load an Excel sheet into Oracle via SQL* Loader

    Hallo!I am trying to load an Excel spreadsheet into an Oracle 10g database via SQL*Loader. How do I achieve this via Oracle Enterprise Manager? Please give a detailed explanation especially covering the locations of the control file,infile,bad file e

  • CALL_FUNCTION_OPEN_ERROR in CRM while trying to connect to ECC system

    Hi All, We are having issues while connecting to ECC system from CRM at specific point of time. It occurred only once yesterday . Since it is a production system, we need to investigate the cause of the issue. Upon checking the logs, I can see dumps

  • Import audio from movie problem

    Every time I import audio from a movie in Logic X, there is a glitch at the beginning of the audio. I just switched from 9 and never had this problem before. Anyone else experiencing this? I think it's a bug that needs to be fixed.

  • Very strange performance issue

    Hi! I've got a very very strange performance problem and I have no more ideas what it might be: The following code fragment contains the useless line int count=0; However, deleting the line reduces(!) the execution speed of the program by ~30%. This