How do i get my new ipod to join the wifi hotspot from my droid cell?

just purchased an ipod 5th gen. am not able to get it to join with the wifi on my droid cell. the ipod recognized the connection but will not join.

The same way it connects to any wifi network.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

How can i get a new ipod of 120G

How can i get a new ipod of 120G

If "120G" means 120GB storage space, the currently sold iPod classic has 160GB.
http://www.apple.com/ipodclassic/

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

How do I get a new iPod Touch to have the same music setup as my old one?

I have all the songs on my ipod touch in my itunes library, but there are also a lot of other songs I don't want, so I can't just sync the new ipod. I could drag them all individually but that would take hours.
I was thinking I could get an ipod-to-itunes music program, and then just do my whole ipod, then transfer all of those songs to my new ipod, then delete the songs I had imported to itunes. But that's expensive.

The post by Zevoneer will offer some suggestions on how to do this:
http://discussions.apple.com/thread.jspa?messageID=10570955#10570955

How many monte should a new iPod 5g keeps the charge

How many minutes should a new
iPod touch fifth generation should keep the charts

What is you question? In one place you ay "How many monte should a new iPod 5g kepps it charge" and in another "How many minutes should a new
iPod touch fifth generation should keep the charts"
What is the iPod doing during the time period?
Apple say:
Music playback time: Up to 40 hours when fully charged
Video playback time: Up to 8 hours when fully charged
However, uses report less time.

How do I get a Windows PC to access the wifi network?

I have a Time Capsule, I curently have a Mac Mini, a Dell Dektop, a MacBook Pro, and an iPod connected to the wifi network. I am now attempting to connect a brand new Windows 7 Toshiba Satellite and a Lenovo thinkpad. The new laptops recognize the wifi network but will not transfer any data, therefore they cannot acccess websites....
What could possibly be the issue...?

Ok, this validates that the PC is at least negotiating with the Time Capsule and can find the TC's DHCP server to get the proper IP addresses.
Let's go to the last phase of the troubleshooting to find out where the communication break is between the PC and the Internet site.
This time we are going to rely on the trusty Ping tool:
Since you verified that the PC is getting the proper IP address information from the TC, we can skip the first three levels of Ping tests: loopback, local computer, and LAN-side of the TC.
The next in line for the Ping test would be the Default Gateway. This would be your ISP's Gateway router. To know what to Ping you may need to go to one of your other devices that can successfully negotiate its way to the Internet. You can get the Default Gateway info from the AirPort Utilty. AirPort Utility > Select the TC > Manual Setup > Internet > TCP/IP tab The Default Gateway = Router Address
Ok, now go back to the PC, open a Command window, and enter the following at the command prompt: ping <IP address of the Default Gateway> If the ping fails, there is either an issue with the TC or the ISP's Gateway router. If the ping passes, go on to the next step.
Ping the IP address of the remote host. That is, instead of using the URL (like www.google.com) use the actual IP address of the website. If you don't know the site's IP address, go back to your Mac, and then, use the Network Utility's Lookup option. Enter the URL of the site, and then, click on Lookup. You should find the site's IP address in the information returned in the panel's results window. If the ping fails, the remote host may not be responding. Try another host just to be sure.
Finally, ping the URL of the remote host. This time instead of the IP address go ahead and use the site's URL. As an example, enter the following at the command prompt: ping www.apple.com If the ping is successful, you're done and the computer can successfully negotiate all the way to the remote host. However, if the ping fails, then the issue is either there are no DNS servers configured or none could be found to translate the URL to the appropriate IP address to "find" the website.

How do I get my new ipod touch to show up on my itunes page

I got an itouch for christmas yesterday, however whenever I connected it to my laptop (compaq windows) it wouldn't show up on my itunes sidebar like it should. So then I decided to download the latest version of itunes, i did that, then i downloaded icloud, (i still don't know how to create an account for that either) Anyways, ever since I opened it and connected it has had the same picture, I think it's in recovery mode but I'm not sure. Does anyone know how to help me?
that is what it has looked like since I got it, and connected to the computer. ^ ^

I returned it for a new iPod nano 2nd generation

How do I get me new Ipod to be recognized on my computer?

I had an Ipod nano before, but it was stolen, so I purchased a new one. Now I can not get my computer to regognize my new one, hence being unable to transfer my previously purchased music onto my new Ipod...... can someone please help??
Thanks!!!

Hello,
First try the Five R's. The Five R's are the five things to first do if your iPod is having issues.
I especially suggest Resetting, Restoring, and Reinstalling iTunes.
Make sure your iTunes program is upgraded. Get the latest version here:
iTunes - Download iTunes
If you have issues installing iTunes' latest updates, go here:
Trouble installing iPod, iTunes, or Quicktime software in Windows
Try out the suggestions and solutions in these Apple Support links:
Using iPod with multiple computers
iPod shows up in Windows, but not in iTunes
iPod missing in "My Computer" or in iTunes for Windows
Try those articles. Post back, so I can try to help if those things above didn't.

How do I get my new iPod Touch (4th gen) to authorize for old purchases?

Recently, I upgraded to the iPod Touch 4th generation model. Unfortunately, even though I have authorized my PC for the new device repeatedly, old purchases cannot be synced. I continue to get the error message that I am not authorized on the computer. My Apple ID and password have not changed and now I am out hundreds of dollars in songs and movies I simply cannot load to the new iPod. Any suggestions in resolving this issue?

You are following the instructions here, right?
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
This may help.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
If you are in the USA you can redownload music, apps TV shows and iBooks but not movies by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do I get my new ipod nano to show up ANYWHERE?

I just purchased a new nano to replace my old 1st generation iPod. Windows does not recognize that ANYTHING is plugged in, the iPod will not charge, but it is flashing "DO NOT DISCONNECT". When I click "remove hardware safely" my computer freezes. I've tried the 5 Rs and also reloading the software, but nothing has helped. Any suggestions anyone?

I returned it for a new iPod nano 2nd generation

How can I get my new iPod shuffle to work in my 2013 Honda Fit?

I keep getting an "unsupported device" display on the radio.

Are you connecting it to a USB port on the car audio system?
Does the car audio system have an aux. audio input mini-stereo jack? If so, you can get something like this
http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
and connect the shuffle's headphones jack to the car audio system aux. audio input, set the car audio system to use that input, and play the shuffle through the car audio system.

How do I get my new iPad to show the correct time?

How do I get my iPad to show the correct time?

Found it in settings/date & time thanks (needed to scroll further than was apparent to an old mac head but new2paddy)

How do I get a new iMac to inherit Time Machine backups from my old iMac?

After successfully migrating from my old iMac to my new iMac, I connected my Time Machine drive (containing the backup files from my old iMac). Following the instructions from my Apple Genius Desk guru, I opened System Preference>Time Machine and selected the Time Machine drive to be my designated Time Machine for my new iMac. I was presented with a dialog asking if I wanted to "Inherit the backup files that existed on the drive" (or words to that effect). I selected "Yes". I was told that this would create a continuous backup record, so that I would be able, using the "Enter Time Machine" command, to access all the backups going forward for my new iMac, but also all the files from my previous iMac, in a "seamless" chain of backups. However, it didn't work out as I expected. Looking in the Finder at the contents of my Time Machine drive, I saw that both the current and the prior backup files appeared to be there, all inside one folder, as I expected. But using the "Enter Time Machine" command from the Time Machine drop-down menu I could not go back any further than the moment of migration to the new iMac. On the upside, it seems like I will be able to recover old backup files using the Finder, but, on the downside it appears that I will NOT be able to use "Enter Time Machine" to return to search the backup files from my old iMac, in a "seamless" fashion as I had expected. Did I miss something??? Or is this just the way it is???

Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

How can I get my wireless printer to join my wifi network?

Since HP Setup Assistant doesn't work with Mavericks, is there another way to get my wireless printer connected to my new wifi network? This printer (HP Officejet Pro 8000 A809) worked just fine with Mavericks on my old wifi network. But my DSL provider recently installed a new router, so I have a new wifi network, which works just fine with everything else.
I was able to get my two Airport Expresses to join my new network, using Airport Utility, but I'm stumped as to how to get my printer to join the new network without the aid of HP Setup Assistant.
Following the advice of Shlomi, I managed to reset my printer so that it now appears in my list of wifi networks under Devices, as hpsetup. But that's as far as I got. Any help would be most approeciated.
This question was solved.
View Solution.

Bruce777 solved this for me, thank you Bruce! My printer now works perfectly on my new wifi network!
Bruce's instructions, for anyone else having the same issue:
- delete any previously set up printers
- scrub old hp software and update software to get the hp 2.8 drivers
- remove the usb cable from the printer if you have one connected
- reset the printer network to hpsetup (hold down the power button and press network button 2x and then cancel 3x, release power button.)
- print out the wireless network test report (hold down the network button and press the update button 2x). verify the network name / ssid is hsetup
- got to sys prefs > network and change the mac wireless network to hpsetup
- go to the sys pref > print scan
- add the HP 8000 printer
- click on the options and supplies button and click on the Show Printer Webpage
- click on the networking tab > wireless in the left pane > start network wizard and change the network from hpsetup to your network
- finish (this page may freeze up. close the browser)
- go back to the sys prefs and change the wireless network back to your networt
- go to the printer and print out the wireless network test report (press network button and update button 2x). Check that the SSID is your network
- go to sys prefs > print scan > select your printer > options & supplies > show printer webpage > network info (check ssid and compare to wireless network test report)
- try printing something to your printer. It might take a little time the first print.

How do I get to synchronise 3 videos of the same thing from 3 different Angles to play in a FLA and switch between them?

Hi all,
It's been a long time since I was on here... well here goes(I need a bit of technical help with a question if I may)
This client of wants a flash video player of a model, modeling some clothes.
They are going to set up 3 different cameras around her at the same time filming her - one from the front, one from the side and one from the back. Each clip lasts exactly 3mins and they are filming her at THE SAME TIME.
Now after this, they want to put a FLASHPLAYER on their website with the video playing in a screen with 3 buttons underneath one saying FRONT VIEW, one saying SIDE VIEW AND one saying BACK VIEW. The three separate videos will be integrated in some way with this one flash file.
The video player might start playing the FRONT VIEW first.
BUT lets say 30 seconds into the clip I press the SIDE VIEW button the video switches to the side view on 30 seconds - The side view video doesn't play right from the start. Like I said before for example if the person is speaking and says "hello there", if you switch angle by clicking one of the buttons just at the point after she has said the word "hello", you switch to the angle where he is just about to say "there". If you see what I mean.
As I said before there are 3 separate video clips:- FRONT VIEW, SIDE VIEW and BACK VIEW. Now I am not sure if these have to be embedded in the FLA file or can be contained in a separate folder on the server so that the SWF can access them. I am worry about streaming over the internet thats why I THINK Flash Media Server3 MIGHT be a solution BUT I don't know. BUT they must be seamless.
AGAIN to reiterate...LETS say I am watching the SIDE view 30 seconds after the clip has started and the model starts scatching her head and then AT THAT POINT I click the front view button below I see the model scratching her head from the front view at THAT precise moment.
So all the videos seem to work at the same time to the casual viewer/user and it looks as though you are just switching views whenever you want.
I have been looking all over the net to see if someone has produced a working example or if there is a tutorial somewhere but I have found NOTHING.
I think there might be a problem pulling this one off as each video clip could be 4-5 MB in size and if they are streaming then there would be download problems and these videos might stop due to people with various bandwidth restrictions UNLESS all the videos were integrated into the flash library and were referenced from within by Actionscript but then the resultant SWF could be HUGE.
I would really appreciate any help/suggestions here and any link to any working samples on the NET that I can download and disect at my leisure.
BTW:-
My email is [email protected]
Cheers

Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
plus u may have to use double buffering techniques to make sure it starts up right away......
thelegendaryghost

How do i get my new ipod to join the wifi hotspot from my droid cell?

Similar Messages

Maybe you are looking for