How do I get my new published website to show up from "view my Website" ?

I created a website a few years ago under Verizon and have since unpublished it.  I started a new website which I've worked on a little and now published it.  When I click "view my website" on verizon's website the old one shows up.  When I click the "edit my website" the new one comes up.  How do I get the old one to go away.  It does not show up on my list of websites only under the view category.  I have cleared my entire cookies/temp/cache.  What next?

I'm a new Site Builder user, but I've seen a similar error.
I Published a test site to Myname (Root) webspace, then deleted it. Then I made a new site and Published it to Myname/new-directory. I've tried to change the PersonalWebSpace 'Update Settings' option to point to new-directory/index.html. But when I use PWS 'View my Site', it shows me the OLD test page!
A related problem - I saved a Site Builder 'Copy' of my site for backup.
I might want to Publish the copy in a different directory name, but if I 'Publish' the copied site, it does not ask me for a new name - it just OVERWRITES my operating site! Any way to work around that?
Or isit just that Verizon and Trellix bit me?   ;-P

Similar Messages

  • How do i get the new emojis if i skipped updating from 7.11 to 8.02

    How do I get the new emoticons when I skipped updating it from 7.11-8.02 and I don't see the new ones that other people have :/

    Hi, MistahMichael.  
    Thank you for visiting Apple Support Communities.
    Here are the steps on how to enable the emoji keyboard on your iPhone with iOS 8.
    iOS: Using emoji
    http://support.apple.com/kb/ht4976
    Cheers,
    Jason H

  • How do I get a new email account to show in accounts and mailbox list

    I have added a new email account to my iPod OS5 but I can't access it.  It doesn't show up in my mailbox or account list.  How do I ge this new account to show up in these lists so that I can access the account?

    I tried a reset and it didn't help.  I have already added one gmail account and it shows up in both my "inboxes" and "Accounts" list.  Still can't access my second gmail account.  When I try to add the new gmail account again, I get the message that this account has already been created.  I have deleted the account and added it again with the same problem resulting.  Any other suggestions?

  • How do you get the new pane window to show websites?

    I followed the instructions in the help article, but it still didn't make my preview windows come back. Am i just doing it wrong or do i have a different issue? I just installed kapersky anti virus as well but i dont see any options that would affect the preview tabs. What else can i do?

    Yes.When you click on the new tab plus sign, there are preview windows for most used websites. Mine have all disappeared. The silhouettes are there, but they will not populate with any websites. There is a help topic about it, but I followed the instructions and no joy, it didn't work.

  • How do I get my 'new' MacBook to quit showing me updates for the last person's ID?

    I bought a MacBook from a friend a few months back.  When I open the App Store and go to Updates, it will say that I have updates under a different account, and give me the account name that my firend had.  My friend thought he wiped his ID and configuration off the PC before he gave it to me.  Seeing that I have an update waiting when I know it's not for my ID is getting old.  I am running Mountain Lion with the latest updates, and am new to the Mac world.
    Thanks,
    Greg

    You had it Neil, I appreciate it.  Turns out the application WAS already on the computer, not added by me later. Once I removed it, rebooted, and added it again from the list of applications I've purchased in the App Store, the message went away.
    Thanks so much,
    Greg

  • How do i get a new text message to show up when i am on the slide to unlock sceen

    when someone texts me and i don't look at my phone because i am busy, after a while the notification leaves the "slide to unlock screen" is there a way that i can keep the notification of a new text message on that screen untill i look at my phone and slide to unlock it again?

    1patiot1 wrote:
    someone please tell me how to fix this. I cant access any apps or anything because my old apple id keeps showing up on my phone and wont show the new one.
    You created a new AppleID?
    Why not simply update your old AppleID so you have only one iTunes account?

  • How do I get my new ipod touch to show up on my itunes page

    I got an itouch for christmas yesterday, however whenever I connected it to my laptop (compaq windows) it wouldn't show up on my itunes sidebar like it should. So then I decided to download the latest version of itunes, i did that, then i downloaded icloud, (i still don't know how to create an account for that either) Anyways, ever since I opened it and connected it has had the same picture, I think it's in recovery mode but I'm not sure. Does anyone know how to help me?
    that is what it has looked like since I got it, and connected to the computer. ^ ^

    I returned it for a new iPod nano 2nd generation

  • How do I get my new ipod nano to show up ANYWHERE?

    I just purchased a new nano to replace my old 1st generation iPod. Windows does not recognize that ANYTHING is plugged in, the iPod will not charge, but it is flashing "DO NOT DISCONNECT". When I click "remove hardware safely" my computer freezes. I've tried the 5 Rs and also reloading the software, but nothing has helped. Any suggestions anyone?

    I returned it for a new iPod nano 2nd generation

  • How can I get my new iPhone to update with backup from old iPhone and not iPad?

    Hi. I just got a new iPhone 4S to replace my old iPhone 3GS. For some reason when I tried using setting up my new phone from the backup of m old phone it put a backup of my iPad. Is there a way I can retrieve this data for the phone? I didn't have any contacts with the ipad backup, just the phone and I really need them.
    Thanks!

    reset network settings, As well as power cycle router.

  • I have lost my Serial number for Adobo Photoshop Elements 10. How do I get a New One?

    I have lost my Serial number for Adobo Photoshop Elements 10. How do I get a New One?  How do I get my reply?  I will try again

    Arthurs wrote:
    I have lost my Serial number for Adobo Photoshop Elements 10. How do I get a New One?  How do I get my reply?  I will try again
    If you have lost your serial number then the first thing you should do is to check your DVD if it is attached on the sleeve of the DVD.  Also, if you registered your product withy Adobe then your account should have a record of your serial number.
    If neither of this apply then you can browse the Amazon website and look for a bargain on PSE12.  PSE12 runs better on new computers and you also get updates for new cameras.
    It looks like you have to buy a new product because serial numbers are not something you can get free of charge here.
    Good luck.

  • Why can't I use my VTone I just purchased from Verizon Market as my phone ringer?  It game me an option to mark it as my default ringer but when I go to 'settings' it only gives me the same generic ringtones, how do i get my new ringtone to use?

    Why can't I use my VTone I just purchased from Verizon Market as my phone ringer?  It game me an option to mark it as my default ringer but when I go to 'settings' it only gives me the same generic ringtones, how do i get my new ringtone to use?

        I like to customize my phone with ring tones too! Let’s get this working for you.
    Did you purchase the ring tone on our website or on the phone?
    If it was purchased online the ring tone is sent to you in a message and you need to save the ring tone first http://bit.ly/PKUfUg and it is saved as a ring tone you can go in and set it as your default ring tone http://bit.ly/R5Xa4o.
    If the ring tone was purchased on the phone you just need to go into your ring tone to set it up http://bit.ly/R5Xa4o.
    Hope this is helpful. Keep me posted if you need further assistance.
    John B
    Follow us on Twitter @VZWSupport

  • My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    http://support.apple.com/kb/TS2005
    http://support.apple.com/kb/HT1861
    https://ssl.apple.com/support/proapps/serialnumbers/

  • How can I get a new copy of the Voicemail app for my LG Spectrum?

    How can I get a new copy of the Voicemail app for my LG Spectrum?  It no longer works....the screen say Loading please wait....the
    !Visual Voice Mail - A Visual Voice Mail error has occurred.  Please try again. OK   I've tryed several times with the same message.  I've
    deleted the app from my screen and replaced it from the Apps Library....still the same message.
    I cannot find an answer on MyVerizon.  Any ideas?
    Thank you,
    Dee

    OK, at least 3 is working.
    I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
    Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
    Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
    You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
    If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

  • How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

    How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
    Hardware Overview:
      Model Name:    MacBook Pro
      Model Identifier:    MacBookPro6,1
      Processor Name:    Intel Core i7
      Processor Speed:    2.8 GHz
      Number of Processors:    1
      Total Number of Cores:    2
      L2 Cache (per Core):    256 KB
      L3 Cache:    4 MB
      Memory:    8 GB
      Processor Interconnect Speed:    4.8 GT/s
      Boot ROM Version:    MBP61.0057.B0F
      SMC Version (system):    1.57f18

    You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
    Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

  • I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

    I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

    Doggiemommie,
    Copying files is not a good idea.
    The "other Mac" was backed up onto Time Capsule using the Time Machine. On your new Mac you should restore the old user - rather than copy files manually.
    This usually happens during the initial setup of the new computer or you can do it later using Migration Assistant.
    Please note, it is possible to damage backup file on the Time Capsule when you browse it and copy files manually.
    Hope this explains.
    TZ

Maybe you are looking for

  • How do you report an ipod touch stolen?

    My ipod touch was stolen by a maid at a hotel i stayed at. Is there a way to report it stolen to Apple without having to look on the actual device for the serial number? I mean, there has to be another way to report it because those who need to repor

  • How to use table name as variable in insert statement

    Hi, I want to insert data from the cursor into the table and I want to submit table name as a variable. I tried the code below but it's not working. Any ideas how to solve this problem? Thx DECLARE v_new_table_name VARCHAR2(30) := 'test'; --open curs

  • Upgrading from 3gs to iphone 4 activation

    The 3gs is my first iPhone. I am upgrading to the iPhone 4 tomorrow. Do I just take the sim card out of the 3gs and put in the new one? Then go through itunes to activate? Any advise would be helpful. Thanks!

  • How do I clear (reset) keyframe points in Final Cut Pro?

    I know there is a quick and single click to clear (reset to none) all keyframe points in the viewer window (motion tab). I just can't figure it out. I have to right click each and every keyframe point and click delete. But there is a way to wipe out

  • Search/Filter a Picture Library with an External Content Type

    We have the need to manage 50,000-100,000 images of ODOT Bridges. Currently, they are added to a SharePoint 2010 Picture Library that is associated to an External Content Type. To handle list threshold and performance issues, we are using folders. Th