How do i get my nokia n8 to print to my officejet pro 8500a?

Hello
Can anyone tell me how to get my Nokia N8 mobile phone to print a photo using HP Officejet Pro 8500A?
I have got the wireless connection enabled, but when I select the photo on the phone and click on Print, via Bluetooth connection, the Printer can't be found.
Any suggestions would be greatly appreciated!!

The Officejet 8500a does not support bluetooth, but you can download an app called HP iPrint Photo and use that, here is a link with information on this app.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Similar Messages

How can I download the Printer Manuel for OfficeJet Pro 8500A. Thank You.

How can I download the Printer Manuel for OfficeJet Pro 8500A. The easy way. Thank You.
This question was solved.
View Solution.

Hi,
You can download the User Guide on the link below.
http://h10032.www1.hp.com/ctg/Manual/c02668142.pdf
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I change a printers workgroup??? HP OfficeJet Pro 8500A Plus

Hi I purchased a new printer direct from HP, a HP-OfficeJet Pro 8500 Plus.
My setup has 5 PC's 3 servers & 1 laptop. Hard-wired network & 2 wireless networks. 2 Network Hubs and 1 ADSL2 Modem/Router This is a pro setup and I am a very experienced user.
I have had this printer for a couple of weeks and have spent many hours checking and re-checking the settings and testing everything. I also tried setting up a wireless connection and it resulted in the same faults. I was under the illusion that a company as big as HP should know how to build a printer by now and that it must be my fault. It isn't???
My networks are setup with static IP's as I find it much easier to solve problems and monitor connections, especially in this case. I even tried a totally separate network just for testing this printer.
I have installed the printer with a static IP and proceeded to enter the DNS
1st Problem - The DNS setting does not accept 2 external addresses, but it will accept one internal and one external.
Finished installation and my PC found the network printer, However, it disappeared. So I checked using HP's Diagnostic utility and it was found and I looked at the advanced settings. Everything appears ok. So I ran a network scanner and low and behold the problem was revealed.
2nd Problem - The printer is connected to MSHOME workgroup,
which I do not use. So that's ok I will change it.??!!?!? Where? There are no advanced settings for the workgroup probably on the assumption that the printer will detect it. It doesn't! This does however explain why the printer appears and disappears.
I have spent the last few days reading posts and it would appear that printers disappearing is a common occurence.
May I suggest that this fault may well be the problem, not just for this printer but for other network printers?!?
Does anyone know how to change the printers workgroup settings? I have used all the HP utilities and can not find a way of doing it. Does anyone know of a suitable tool or what HP use to connect to the printers and what language it is?
3rd Problem - ePrint cannot connect to the printer? I suspect this too will be solved when the workgroup & DNS is corrected.
If you have a default workgroup then the printer will work fine. I don't, so it doesn't!
This printer probably works fine for a home user with default settings and DHCP connections anything more and problems are encountered.
What is required is an advanced utility (or altering the current Network Diagnostics one) that allows us to change all aspects of the network connection, not just some of them. Relying on DHCP settings and standard default settings is no good.
Possible additions or alterations required are: (Think router options with printer settings)
The choice of either static IP, auto IP address or DHCP
DNS settings for 2, but preferably 4 with all accepting external DNS addresses without throwing up faults.
IP Range (if applicable)
Preferred workgroup (if applicable)
Default Gateway & Subnet
Connection Type
Broadcast options
uPNP options
Print manager (with current connections and /or jobs)
4th Problem - The web interface throws up faults even when the information is correct.
The only option then is to enter it through the printers interface, which is limited, but it will accept the information.
I suspect most of the problems may be fixed by a firmware update. Lets hope there is one soon with all the required bits added. If you think what I have written is a load of rubbish then feel free to comment and any useful options or fixes would be very welcome.
Knowledge is what we know, Intelligence is what we understand.

Unfortunately, the installation software for OfficeJet printers is incapable of 'finding' the printer on a peer-to-peer network, if:
- there isn't a DHCP server;
- if assignment of IP addresses for network devices is performed manualy, or
- if your peer-to-peer network's NetBIOS Group / Workgroup name is anything other than "MSHOME"
This last item appears to be a hard-wired configuration on every HP OfficeJet.
To provide even more frustration, HP provides a "Update IP Address" tool.
However, even though its printer can be 'pinged', and command line utilities (below) clearly show the printer existing on the network, the printer cannot be "located" by this tool, as HP's hard-wired NetBIOS Group / Workgroup name does not match the Workgroup name our firm uses.
Having a manufacturer decree that users must change the configuration of every device on their network to accommodate use of its product is unacceptable.
This is a relatively easy fix, HP.

How do I get my Nokia contacts from my PC onto Iphone 5s

How do I get my Nokia Contacts fromPC onto Iphone 5s , they are in vcf format

Go to icloud.com on the computer and follow instructions here.
http://support.apple.com/kb/PH3605

How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

How do I get a folder to open up in Final Cut Pro version 6. I'm on a MAC OS X Version 10.6.8. The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive. When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found. Unable to import this file." When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file". What should I do or what am I not doing?
Cliff

YYou should ask this question on the Final Cut Studio forum.

E mail bt print very small and i cannot change it. how can I get my e mails to print readable size

HOW CAN I GET MY E MAILS TO PRINT TO READABLE SIZE. BT YAHOO WINDOWS 7 HOME PREMIUM HP DESKJET F2480
NO FONT AVAILABLE TO CHANGE SIZE TO PRINT TO READABLE SIZE EG FONT SIZE 12 OR 14. DISPLAYS ON ABOUT SIZE 8
ALSO HAVE TO CLICK FULL VIEW TO READ. THIS HAS SUDDENLY APPEARED, DID NOT HAVE FULL VIEW ETC BEFORE .

Go to the following address: https://account.services.mozilla.com/
If you DO NOT remember your password, press the "Forgot your password?" link and it will be sent to the e-mail address that you used for registration.
Enter your e-mail address and your password. Follow any additional prompts. '''This should remove your account and all Sync data associated with your account from the servers.'''
Then, set up a new account.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

How do I get a m4v video to play on my Mac Pro computer?

How do I get a m4v video to play on my Mac Pro computer?

Have you tried VLC? That can play virtually any media format.

How do I get my iphone 4 to sync with my macbook pro?

How do I get my iphone 4 to sync with my macbook pro?

Connect to iTunes...
See Here
Syncing with iTunes
From Here
http://www.apple.com/support/iphone/syncing/

How do I get my HP 2645 to print 4x6 cards. It gives me a mismatch paper size error

How do I get my HP 2645 to print 4x6 cards? It gives me a mismatch paper size error.

Hi @aleek,
Thank you for visiting the HP Support Forums! I see you would like to print 4x6 cards to your HP Deskjet Ink Advantage 2645, when you attempt to print the card you get a 'Paper Mismatch' error.
I would like you to go ahead and take a look in your User Guide on page 10, here it shows how to load the media and change the printing preferences, although it shows Photos, you would use the same guidelines and steps for the Index cards, just be sure to change the media type to the correct card you are using.
Once you have the media loaded and settings set if you are still getting the error, continue here: 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
I hope this helps, if you have anymore questions please let me know.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How do I get my iphone 3g to print from my hpc8100 printer

How do I get my iphone 3g to print from my hp c8100 printer

There is 3rd party software out there to install on your computer, to be able to print from a device using iOS 4.2.
For example Printopia if you're using a Mac.
You'll need at least an iPhone 3GS to be able to do so without other 3rd party software:
AirPrint Basics

How do I get my Samsung tablet to print invoices and shipping information

How do I get my Samsung tablet to print invoices and or shipping labels . Have HP loaded will not print.

Hi,
Depending on your printer actually, please use the Google Play/Store search for HP All-In-One Printer Remote or HP ePrint and install on your tablet.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I get my HP 6515 to print photos

How do I get my HP 6515 to print photos on standard paper from the standard bottom tray (8 1/2 x 10). I keep getting messages that my photo tray needs paper, I don't want to use that tray. Thanks.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system and what program are we printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I get Elements to occupy full screen on my macbook pro? - the docking station remains visible and I don't want to have the dock in hide mode?

How do I get Elements to occupy full screen on my macbook pro? - the docking station remains visible and I don't want to have the dock in hide mode?

Unfortunately, there is no answer to this problem via this link. It may be that this is simply how the software actually works. It is a design fault in Adobe Photoshop Elements. It is possible to temporarily hide the dock within 'system preferences'. Oh well. Someone may know better.... I hope!

How do you get rid of 'empty' pre-roll time in logic pro 9?

how do you get rid of the pre-roll time in logic pro 9?
My project's start time is 8-bars before any material, or tempos, or anything...
Can't move the start time back to ")" (zero)    STUCK!! at -8
The song now has 20 seconds of dead air time in a pre-roll.
None of these worked or revealed anything...
-tried making a new copy of song
-looked into every track's file information looking for a spurious entry
-tried deleting the time/space

Hi
Check for any Track Automation nodes in the "preroll'.
CCT
Edit
You should note that generally negative (or zero) project start numbers should be avoided at all cost: there are many peculiar behaviour problems associated with them.

Editting PDF documents that were created by a MAC doesn't work because of font incompatability. How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

Editting PDF documents that were created by a MAC doesn't work because of font incompatability. How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

If it's a Mac font and you're on Windows, you can't. If you are also on a Mac, you'll need to purchase the fonts (fonts are generally non-transferable, like software. One of the reasons pdf exists), install them and try your edits.
But it's best to edit the original document and create a new pdf when finished.

How do i get my nokia n8 to print to my officejet pro 8500a?

Similar Messages

Maybe you are looking for