How do I get my outgoing server to work on my Iphone 5

I bought my Iphone 5 from Apple when it was first available. I have had an ATT acount for many years along with an MSN email account. I have had issues with sending email from my IPhone 5 since I have recieved this phone. I have deleted and readded the email application numberous times(sometimes 10 times a day), I have reset my phone a number of times, I have also changed my email password a number of times and readded to both my incoming server and outgoing server passwords. I have spoken to ATT tech support, Apple Tech support and Msn tech support multiple times, they have not been able to help me. I sometimes have  gotten it to work for a few minutes to a couple of hours but as soon as I try to send an email from my phone again it will no longer send an email from my phone. I use my phone for work and this is very annoying as I have to use my email for work.I need help!  I have had Iphones since the first Iphone and Mac computers for over 10 years but I am now over it, at this point I would not recommend Iphones. I am now at the point of buying a phone that I can use and it will not be an Apple Iphone.

jenylark wrote: I have deleted and readded the email application numberous times(sometimes 10 times a day),
No, you simply have not.  It is not possible to delete the email application on the iPhone.
Let's assume that the email accounts were deleted and re-added, if this is done properly, the email accounts simply work.
So delete whatever account is on the phone, add them back correctly and it will simply work.
Follow the instructions provided by the email provider to add the account to the device.

Similar Messages

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • How can I get an external microphone to work on an iphone?

    How can I get an external microphone to work on an iphone?

    Japib is correct.
    WHAT happens? Exactly.
    Also helpful would be to tell what event preceded this behavior - added App, update iOS, etc.
    Quoted from  Apple's "How to write a good question"
       To help other members answer your question, give as many details as you can.
    Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
    Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
    Describe the problem, and include any details about what seems to cause it.
    List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
    ÇÇÇ

  • How do I get my outgoing mail to work using Network Solutions email

    I use Network Solutions to host my URL and email. I had Thunderbird working but my computer crashed. I had to reinstall Windows and Thunderbird. I now cannot get my outgoing email to work. I've tried different SSL, Port, and Authentication settings with no success. Does anyone know how to setup Network Solutions email in Thunderbird?

    Have you asked Network Solutions about the correct server settings?
    Presumably they do have a support web site.

  • Can't get Godaddy outgoing server to work in Mail - OK in Outlook

    No matter what I try, I just cannot get the Godaddy outgoing server to work in Mail, but it works OK in Outlook for Mac which I don't really want to use if I can avoid it.
    I've tried all my 3 accounts and none of them work with sending.  All Ok receiving.
    Tried smtpout.secureserver.net with and without SSL, and with all sorts of ports 80, 3535, etc.
    Nothing works.
    Can anyone suggest any solution or more in depth troubleshooting methods.  I feel it's some security issue which Outlook seems to have more settings for.
    Thanks.

    Eric Root wrote:
    Copy the line below.
    ~/Library/Containers/com.apple.mail
    While holding down the option key, select Go/Go To Folder from the Finder menu bar. Paste the line into the window. You won’t see it.
    Just for clarification for the OP these are two different approaches to get to the same file.
    1.)While holding down the option key, >>Shows the hidden  users Library (~/Library.)
    or
    2.) select Finder>Go>Go To Folder from the Finder menu bar. Paste the line into the window
    ~/Library/Containers/com.apple.mail
    Using the Go to Folder option will take you directly to the file itself in your user Library (~/Library,) no option key necessary.
    Eric Root wrote:
    Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    AND if you are recommending moving the entire folder you are better off going to the /Container:
    ~/Library/Containers/

  • HT1338 HOW CAN I GET MY BLUE TOOTH TO WORK ON MY IPHONE 4

    HOW CAN I GET MY BLUE TOOTH TO WORK ON MY IPHONE4

    Your bluetooth what...?  Its impossible to give any help without knowing what sort of device you are trying to pair with the iPhone.
    iOS supports the following bluetooth profiles - http://support.apple.com/kb/HT3647

  • HT5012 How do I get the meddle button to work on my iphone

    How do I get the meddle button to work on my iPhone

    I Cannot use the meddle button on my p
    iPhone

  • How can I get the iCal server to work correctly?!

    We are a business that uses Apple software and products for everything! For a while we've been having an issue with iCal - it seems when an invite is sent we are unable to accept, we click 'accept' but the message is never sent, so then it looks like we're ignorning the request (which of course can look un professional). We have approached various IT companies and all they seemt o sugegst is using a different Mail Server (such as Kerio, Exchange etc) as a fix, which of course is quite costly, especially when we believe, that iCal should be  able to work effectively for a growing business.
    We've deleted users from the server, added them back on...the only way they can accept invites is if they keep it on the local calendar, which of course isn't any good to us as we share the calendars, therefore it needs to be on the server.
    I'm really hoping there is something someone out there can tell me to help us! I am loosing hope and I am reluctant to fork out for such costly solutions as Kerio when I know iCal server can work. Please help! If you need any further information please let me know.
    Thanks

    One product that I have used, when there is a poorly formed AVI header is Digital Video Repair (cannot recall if it is freeware, or shareware), BUT it is likely that your file's header was NEVER written, so no amout of "repair" will succeed. Still, might be worth a try?
    With many AVI's, the header often comes first, where with some other formats, like MPEG-2 and WMV, the header is the last part of the file. Could be that the header of the AVI is just incorrect, such as with the Duration. Only a test will determine if you can repair the file.
    Good luck,
    Hunt

  • How can I get the skip count to work on my iPhone?

    I continue to keep looking for the answer to this question however, it's seems that I continue to keep running into a wall.  I have several of my smart playlists that rely on monitoring the skip counts.  I never had an issue until I upgraded from a touch to an iPhone.  What's the deal?  This phone can do everything and anything imaginable but it can' keep a skip count.  Has anyone figure out how to fix this, or am I going to be waiting like everyone else for apple to fix the issue?  Help!!!! This is frustrating.

    I Cannot use the meddle button on my p
    iPhone

  • TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

    Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

    There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
    The published website is www.vibrationalvoyages.com.
    When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
    I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
    Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
    SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
    Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
    I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

    Thank you for checking, Tom,
    I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
    Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
    My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
    On both error messages, the URL I was checking was:
    http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
    The last URL was, of course, the URL generated by iWeb.
    So, my question still is:
    HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
    Any ideas?
    GG

  • How do I get Apache web server working ...

    How do I get Apache web server working on my MacBook Pro, which is running Leopard 10.5.8?
    When I enter 'http://localhost/~username/' (without the quote marks) as a URL in my Firefox browser on the MacBook, I do not see any result at all(!). I do have Web Sharing on in System Preferences on that machine. But the browser does nothing whatever for that URL ...
    On my other computer, an iMac running Leopard 10.5.8, when I enter 'http://localhost/~username/' I see the default "Your Website Here" page. That same default page is in fact the index.html file I expect to see on the MacBook Pro. But it isn't getting invoked for some reason. Nothing is happening ...
    When on the iMac I try 'http://10.0.1.18/~username/' (10.0.1.18 is the local IP address I see under 'Web Sharing: On' on the MacBook) I get "Unable to connect: Firefox can't establish a connection to the server at 10.0.1.18."
    When on the MacBook I try 'http://10.0.1.5/~username/' (10.0.1.5 is the local IP address I see under 'Web Sharing: On' on the MacBook) I see the default "Your Website Here" page.
    It is the same on my iPhone: Using the same local IP addresses and usernames, Safari can see the index.html page on my iMac but not on my MacBook.
    It looks as if Apache is not working on the MacBook, while on the iMac it works fine.
    On the MacBook I can see (after I use 'defaults write com.apple.finder AppleShowAllFiles TRUE' in Terminal) a /private/etc/apache2/ directory with what look to be(?) the usual contents. So it looks like Apache is duly installed, as far as I can tell.
    On the MacBook I don't see a file at /private/var/log/apache2/error_log, which is the location for 'ErrorLog' given in the httpd.conf file.
    That about exhausts my understanding of how to get a handle on my problem.
    Any advice or suggestions from those who have more expertise with Apache will be much appreciated ...

    Okai, so we are getting somewhere, but not quit there yet :-)
    I opened the Kenneth.conf file using the command: vi Kenneth.conf
    This is what it said:
    <Directory "/Users/Kenneth/Sites/">
    Options Indexes Multiviews
    AllowOverride AuthConfig Limit
    Order allow,deny
    Allow from all
    </Directory>
    "Kenneth.conf" [readonly] 6L, 139C
    I therefore changed the AllowOverride from AuthConfig Limit to None, which was the only difference from what you posted above. Something did change, when I tried to open XAMPP it prompted me a password, but Apache still wont start :-/

  • I just registered a domain name. I would like to publish an iWeb site to own server. How do I get the FTP server settings?

    I just registered a domain name. I would like to publish an iWeb site to own Mac Mini server. How do I get the FTP server settings?

    reference:
    http://www.macinstruct.com/node/152
    http://www.macminiserver.com/
    http://www.macdrifter.com/2011/04/more-dropbox-fun-ftp-access/

  • Can't synch iphone. Get message "synch server failed to synch the iphone.  ANyone have any suggestions on how to fix this issue?

    Can't synch iphone. Get message "synch server failed to synch the iphone.  Anyone have any suggestions on how to fix this issue?
    Windows 7
    ios 7.1
    iphone 5

    Hello, skifmli
    Thank you for visiting Apple Support Communities.  
    I understand that you are unable to sync your iPhone and receive an error.  I was start with restarting iTunes and your computer.  Once this is done, test the results by attempting a sync.  If the issue persists, go through the troubleshooting steps in the article below.  
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    Cheers, 
    Jason H.  

  • How do I get rid of "Server responded with an error"?

    How do I get rid of "Server responded with an error" in Calendar?  Calendar is frozen and Calendar menu will not allow preferences or quit.

    Please take each of the following steps that you haven't already tried, until the problem is resolved. Back up all databefore making any changes.
    Step 1
    From the Calendar menu bar, select
    Calendar ▹ Preferences ▹ Accounts
    Choose the affected account from the list on the left and uncheck the box marked
    Enable this account
    Then check the box again. Test.
    Step 2
    Make a note of the account settings, then delete the account and add it back with the same settings.
    Step 3
    If you can't add the account, the settings may be invalid. Verify them. How you do that depends on what kind of account it is. If it's a Google calendar and you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.
    Step 4
    Quit Calendar. Triple-click the line below on this page to select it:  
    ~/Library/Calendars/Calendar Cache  
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Maybe you are looking for