How do I get my printer settings back?

This is my first Mac, and it's a laptop. After a week of trying, then research on the web, I finally figured out how to format my desktop PC (which my printer is hooked up to via USB) and this Mac to print from the Mac. It worked for one day, then I did something and messed up the settings and cannot get them back. This is the problem:
In system preferences, when you get to the fax and print, I had to go through the top where it says Default, fax, IP, Windows, bluetooth, appletalk, etc. The only way I was able to get my printer to work was to go into the "windows" menu. I was able to see the workgroup name set on my desktop,which led me to see my computer name, set on my desktop, which then led me to see my printer name, set on my desktop. Now, I can't get that "windows" preference to open. So adding my printer ANY OTHER WAY, and I have tried them all, is not working. I need to be able to get back into that one preference, be able to see an add all those names, and add it that way. Does anyone know a way to do that?
Yvette

Input the following settings:
Interface: VPN
VPN Type: Cisco IPSec
Service Name: This can be anything, I left the default.
Edit the new interface details as follows:
Server Address: cisco.vpntraffic.com or other country vpn such as norway VPN
Account Name: Your vpn account
Password: Your vpn password

Similar Messages

  • When updating to new IOS on Ipad i lost my purchases in DJ Rig How can i get my old settings back?

    Does anyone know how to reset your old settings or how i can get them to give me the update so i do not have to purchase again.

    Unless the device was backed up prior to restoring the backup from the iPod Touch, there is nothing to restore.
    Just set up the email account again... it's not difficult, but you may need information from your corporate IT dept to set it up.

  • Hi, today I upgraded my iphone 4 to an iphone 5. I backed up and synced my data on itunes and icloud. My new iphone however reverted to my 2011 phone settings. how do i get yesterday's settings back and get my contacts and photos from icloud onto new phon

    Just to give you a bit more detail. I upgraded my iphone 4 to an iphone 5 today. Last night I backed up and synced all my messages, photos and contacts on itunes and icloud. When I connected the new iphone 5 to itunes today, it somehow reverted back to my old phone settings from 2011 :S So now, I have apps, particularly games, that are incomplete. My contacts have numbers that are out of date and I have none of the photos that were taken in the past year. My 2012 messages are gone and old messages from 2011 are there. Now, all my phone data had been regularly stored and synced with itunes and icloud. So why did it revert back to 2011 phone settings and how can I get it to change to the settings that existed last night? Also all my information on icloud, how do I get that onto my new iphone? If I go on www.icloud.com and sign in, all my photos, contacts, mail and messages are there, but I have no idea how to transfer that to my new iphone 5. Any help on all of these issues would be appreciated, thanks.

    In Regards to this, You possibly wont be able to get the contacts from the iPhone 4 unless there is a back up file on your computer.
    The original phone would be disabled due to alot of attempts of the wrong passcode. If all your contacts are on the cloud at the moment, you would be able to just set the iPhone 4S up with iCloud on it then Turn On "Contacts".
    This would be bring all the contacts down from your iCloud onto your 4S.
    But you will only be able to merge your contacts with the cloud when your original iPhone either has been enabled or the passcode was entered.
    If you have previously already had iCloud on that device and have contacts Turned on, you will be able to just enter the same Apple ID you used for iCLoud on your original phone and use it on your new one.
    Your able to check what content your iCloud holds via www.icloud.com
    If you are unable to get past the disabled screen, then unfortunately the device will have to be put into recovery mode and then restored via iTunes NOTE: This will delete all data.

  • My NEW Iphone 4 'restored' to my 3rd generation Ipod touch. How can I get the old settings back?

    Please Help! I just got an IPhone 4 today from work and I wanted to 'sync' my IPod touch apps to the Iphone and it 'restored' to my OLD 3G Ipod Touch settings! How can I get it back to what it was when I received it from work? My work email account is completely GONE and it was already all set up when I recieved the phone. I am extremely worried that I won't be able to go back to what it was! PLease please tell me I can restore it back to how it was....with my email account all set up and everything. I would appreciate any help I can get...I just can't believe I did this!!! THANK YOU!

    Unless the device was backed up prior to restoring the backup from the iPod Touch, there is nothing to restore.
    Just set up the email account again... it's not difficult, but you may need information from your corporate IT dept to set it up.

  • How can I get Normal video settings back

    Before I launch into describing the problem, I thought I would tell you that I really had hoped it would have been a common problem, and therefore went through about 12 pages of topics and problems before I decided to open a new topic. The closest thing I found was from someone who apparently experienced part of my problem - a shifting of the screen.
    What I really need to know in lieu of a specific solution to the specific problem is to know how to get back to Default settings for monitor display. Something I did screwed things up. I am not even sure precisely what I did to mess it up, because I actually did several things that could have contributed. But, the end result of what I did was that my screen font display looks wierd, and not normal. I have an ATI video card, and I hit Detect display, so it flashed off and then back on. What is the setting that the display is normally set on. I have tried various solutions, but can't seem to get back to where it once was. I would presume that a reinstall of OS X would do the trick but that seems too radical of a solutioni. Any ideas? Thanks in advance.

    Hi-
    What is the setting that the display is normally set on
    You didn't say what display you are using.
    Try a new user account. Everything will be at default in the new account.
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

  • How do I get my personal Settings Back In Firefox

    About 2 days ago I launched Firefox and all of my personal settings were gone.
    Personal settings like "Personal Theme #44 and icons in the toolbar: "New Tab",
    "New Window".
    Is there a way to get these setting back the way I had them without re-configuring
    them all?
    Thanks for your time and help!
    Sincerely,
    John Eline

    see [[Profiles - Where Firefox stores your bookmarks, passwords and other user data|Profiles - Where Firefox stores your bookmarks, passwords and other user data]]

  • After upgrad to 5.0.1 all apps and all my music is lost, how can i get my old settings back

    Everything is gone after the update, there are no apps on the ipod, neither on or in itunes

    That happens when you do the update on a computer when the apps and media (e.g., music) are not in the iTunes library.
    You need to go to the computer with the pass and media and restore from the last backup you have on the computer.
    You can also redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    This explains when happened:
    iOS 5: Updating your device to iOS 5

  • How can I get my sound settings back to where they were initially. I lost my default device somehow.

    I was trying to listen to my music via my Bluetooth Bose speaker and I could not make that work. I went to Control Panel>Sound>Playback, and chose my default device, selected Properties, then Don't Use This Device, at which time my default device disappeared and all of the sound from my computer stopped.  Please help.

    Hi,
    Check the link below and use Microsoft Fix it:
    Diagnose and fix sound playback and audio problems automatically
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • HOW DO I CHANGE MY PRINT SETTINGS SO THAT THEY STAY SET TO MY PRINTER DEFAULTS?????????????????????????????????????????

    This one issue is probably the one thing that would make me abandon Firefox FOREVER (besides the problems with Flash). If I change print settings for ONE COPY I have nothing but HELL trying to get my print settings BACK to my PRINTER defaults. Why can't Firefox be like the REST of the computer world and have the PRINTER DEFAULTS override Firefox?????
    I made a change yesterday and I have NOT been able to get it changed BACK to the defaults.
    Is thois too complicated?

    Hello Grillmark55 , any luck if you [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox#w_reset-firefox-printer-setting Reset Firefox printer setting] ? , if the above link is not helpful then see: [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox#w_reset-firefox-printer-setting Reset all Firefox printer settings]

  • How do I get the little screen back, that tells me how much ink I have left in my print cartridges?

    How do I get the little screen back, that tells me how much ink I have left in my print cartridges? It used to show up whenever I would print something, now it doesn't and I have no idea how much ink is left in the cartridges.  I have a HP Photosmart C4180 All in One Printer. I recently purchased new computer, a HP Pavilion P7-1254 AMD Vision, which runs Windows 7. I just want to know how to get the screen back that tells me how much ink I have left. Thanks.

    Hi there pyesangel,
    Open the Printer Toolbox . There are two ways to do this:
    Open HP Solution Center , select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox .
    Open Printers and Faxes in the Windows Control Panel , then right-click your printer icon and choose Properties . Click Printing Preferences . Click the Features tab, then click the Printer Services button.
    The Printer Toolbox opens. Click the Estimated Ink Level tab. A cartridge may be running out of ink even if the graphic shows ink remaining (see the note at the start of this section). Lines or streaks always appear in printouts when the cartridges begin to run out of ink. Replace print cartridges that are out of ink or low on ink.
    Figure 1: Estimated ink levels
    Give it a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do I get off the settings screen and get back to the iPad desktop?

    I am a first time user. How do I get off the settings screen and get back to the desktop?
    Thanks

    Press the home button.
    It's the button on the face of the device.

  • I have used the same Apple ID on my children's iPads. Both iPads are now showing as the same. How do I get the missing account back?

    I have used the same Apple ID on my children's iPads. Both iPads are now showing as the same. How do I get the missing account back?

    You can clear the iPad and start again with the other account> Settings->General->Reset->Erase all Content & Settings
    Or you can go to Settings->Itunes and App Stores->Apple ID->Sign Out,
    And Then  Sign in with the other account. You can then download the Apps with that account. Though you may block the other account for 90 days.
    Your best bet is to set it up again using the orighinal account it had, so you can get their Apps back. without affecting your account.

  • HOW DO I GET THE OLDER BROWSER BACK???

    ORIGINAL REVISED QUESTION =
    AFTER ALL THAT ~ going through the whole MESS you have created and YOU TELLING ME that "in order to have a chance of getting my question answered ~ to give you ALL THE DETAILS I CAN", you REFUSE to accept is by saying, "Please keep the length of your question to 255 characters or less ..."!!! Are you INCAPABLE of saying that BEFORE I go through all the other MESS??? HOW DO I GET THE OLDER BROWSER BACK???
    ORIGINAL QUESTION = I had SEVERAL plugins that WORKED!!! Then, I "upgraded" {as you, LAUGHINGLY, claim} to your Firefox 4 version after being promised by you that it's BETTER and, supposedly, an IMPROVEMENT over the older version. After I installed the NEW one ~ IT TURNED OFF ALL MY PREVIOUS PLUGINS!!! Your WISHTHEYWUZ "PROGRAMMERS", very cleverly {and, actually, HATEFULLY} ummmm, kinda "forgot" to make the new browser BACKWARD-COMPATIBLE so that it didn't DESTROY everything we, already, had ~ that WORKED before YOU got hold of it!!! So, now, *HOW* do I get the OLDER version back??? I think you should KNOW what you can do with this newer "UPGRADE" that is, actually, a LIE!!! UPGRADES do NOT take you in REVERSE ~ making things WORSE ~ real upgrades make things BETTER!!! DUH-H-H-H!!!
    ORIGINAL DETAILS =
    I, recently, purchased a new HP 4500 Printer and it came with a video-capture extension/plugin. Attempting to use it, the program informed me that I needed to be using, either, an EI or a Firefox Browser mentioning version 1.5 {I think it was} or later. The Firefox browser I was using was 3.something; so, everything was going along FINE. When I installed the video capture program, it added the plugin to the browser ~ PERFECTLY!!! I, also, had MANY other plugins that worked and that I used somewhat regularly!!! NOT ANY MORE!!! YOU and your TOTALLY INEPT, WISHTHEYWUZ "PROGRAMMERS" have STOLEN nearly HALF of my COMPUTER!!! I can, no longer, USE ANY OF THOSE PLUGINS, simply, because YOU "forgot" {let's say} to INCLUDE them in your new browser version 4. WHAT WAS WRONG WITH THEM??? WHY DIDN'T *YOU* WANT ME TO BE ABLE TO USE THEM, ANY LONGER???
    Apparently, YOU think that the computer world revolves around YOU and that YOU are its AXIS!!! You feel that YOU have NO RESPONSIBILITY to make YOUR programs in any way compatible with what is, already, available ~ according to the "advice" I noticed on one of YOUR pages WHILE REACHING THIS ONE, you said that everybody else must accommodate YOUR claimed "improvements" that do nothing but DESTROY!!!
    All I want is for YOU to, either, MAKE YOUR VERSION 4 COMPATIBLE; or, advise me on HOW to get the EARLIER version back that *IS* compatible. Otherwise, I'll switch to a different browser and advise all others over whom I have any influence to do the same for the sake of their overall computering enjoyment!!!
    PLEASE ADVISE!!!
    I see that you have provided {below this window} a space for, likely, a SINGLE Extension / Plugin. Therefore, a PARTIAL LIST follows ~
    ArcSoft Video Downloader Extension 2.0.0.8
    Copy to Wordperfect Lightning 1.0
    Google Photos Screensaver 2.0
    HP Smart Web Printing 4.5
    iWinGames Plugin 1.5
    Microsoft.NET Framework Assistant 1.2.1
    RAW Thumbnail Viewer 2.0.0.11
    Real Player Browser Record Plugin 1.1.3
    TVU Web Player 2.5.3.1
    Yahoo! Toolbar 2.1.3.20100310105313

    THANK YOU, TREMENDOUSLY, for the responsive information!!! Although, the WISHTHEYWUZ "programmers" and those that are, actually, controlling and "in charge" of this website ~ you know who I mean ~ those that are so SUPERB at, ONLY, "PASSING THE BUCK" in order to get the regular USERS to answer the questions directed at THEM {as mine was}!!! In that way, of course, they EVADE countless issues and what would be EXTREME PANGS OF GUILT to anyone that "stood responsible" for their actions!!! Regardless, even though, "THEY" continued to lay the blame for the SHODDINESS & EXTREME INEPTNESS OF *THEIR* PROGRAMMING ATTEMPTS onto others ~ the links that *YOU* were kind enough to share with me *DID*, in fact, get my older ~ MUCH MORE USABLE browser back!!! Of course, NOW, the shoddy WISHTHEYWUZ "PROGRAMMERS" have rigged everything so that I will be HOUNDED and HARASSED in order to try to FORCE the crappy version 4 back onto me!!! I, still, wanna provide YOU with all the ACCOLADES possible!!! Your desire to attempt to HELP OTHERS is, truly, a remarkable characteristic in today's world of SELFISHNESS and UNGODLY attitude problems!!!

  • My daughter's iPad is backing up to my iCloud, which is how we set it up originally. Now she has her own iPhone with her own iCloud. How can I get her iPad to back up to her own iCloud?

    My daughter's iPad is backing up to my iCloud, which is how we set it up originally. Now she has her own iPhone with her own iCloud. How can I get her iPad to back up to her own iCloud?  Her iPad is taking up 3.4MB of my 5MB. I need my space back!

    kat...mom wrote:
    I suppose ya.  If she deletes my account from her iPad it won't affect my account, right? 
    Yes, that's correct, it won't affect your account or your devices in any way.
    Use the delete account button in the iCloud settings.
    Then enter her iCloud details in the new screen that appears and log in. She should then be returned to the screen above but with her Apple ID at the top, enable the services she wishes to use and then tap the storage & backup option and ensure that iCloud backup is turned on.
    settings

  • How do I get my scanner functions back on new Windows 8 laptop?

    Finally got my Pixma MX 420 into my wireless network with new laptop and Windows 8.  I can't find the scanner functions like it had before on two of my old computers. How do I get the scanner window back?

    Hi rlhag!
    The scanner function is available through the bundled software that comes with the printer.  Since you have Windows 8, you probably needed to download the drivers from our website.  You can download the scanning software, MP Navigator, from our website.  I will include instructions to download below.
    Please perform the following to download the software from our website:
     1.  Visit Canon's web site at: 
    http://www.canontechsupport.com
     2.  Click on SUPPORT & DRIVERS.  On the Support & Drivers page, select your model in the following manner:
          a.  From the first menu, select PRINTERS & MULTIFUNCTIONS.
          b.  From the second menu, select PIXMA MX SERIES.
          c.  From the third menu, click DRIVERS & SOFTWARE beside the PIXMA MX420.
     3.  Select Windows using the drop down menu SELECT OPERATING SYSTEM VERSION, then select your version of Windows 8 using the SELECT OS VERSION drop down box.
     4.  Click SOFTWARE.
     5.  Click on MP Navigator EX.
     6.  Instructions for completing the download and installation will appear on the page that follows.  You will also see a disclaimer at the bottom.  Review the disclaimer, and click I AGREE - BEGIN DOWNLOAD.
     7.  Once the download is complete, double click on the downloaded file to start the installation.  Follow the onscreen instructions to install.

Maybe you are looking for

  • How To add a second eSata drive once first drive capacity is reached

    What upgrade options are available once an eSata drive recording capacity is reached? Once an eSata drive connected to CHS 435HDC DVR reaches recording capacity, is there a way for a second external eSata drives to be connected and used as external s

  • My MacBook Pro runs slow and freezes

    Hi guy hope somebody can help me with this, my MacBook Pro runs slow lately and sometimes it freezes. This is my EtreCheck Thanks EtreCheck version: 1.9.15 (52) Report generated October 25, 2014 at 12:56:58 PM EDT Hardware Information: ?   MacBook Pr

  • Down Payment Item Selection in Invoicing

    Dear Experts, My client requirement is, down payment request needs to be displayed in the IS-U bill print out. I have maintained the main and sub transactions in the SAP Utilities->Invoicing->Invoice Processing->Item Selection in Invoicing->Item Sele

  • 890GXM-G65

    Good day everyone. I'm looking for a place to buy a single 890GXM-G65 from that ships to the Netherlands. I have looked around but can't find anything. Hans

  • SLOW internet dial up connection

    I bought a Power mac G4 with internal v92 modem. My connect speed is only 28.8k with a average through put of 19k. I can take my wifes PC Computer, plug it into the same wall jack that the Mac was in and get a 50.6K connection with a average through