How do I get my printer to work with my iPhone/ipad wirelessly

how do I get my printer epson workforce 610 wirless to work from my iphone/ipad?  I downloaded the epson printer app.

Maryannebrabander,
Your comment " ... It was printing great until I did this upgrade." brought to mind a thought:
If you're ever in the SIlicon Valley area of California, specifically Mountain View, CA, I strongly recommend a visit to the Computer History Museum there.  This page from the Museum website shows a Calcomp plotter advertisement from 1969:
http://www.computerhistory.org/revolution/mainframe-computers/7/161/689
My question to you is should the iPhone be able to print to the Calcomp plotter?  If not, exactly how old would you have a printer (or plotter) be before you dropped support for it?  If you ever do drop support, then that would occur at some discrete time - one day it would work, then something would be updated and it would no longer work.

Similar Messages

  • HT3310 how do i get my headphone to work with the iphone?

    how do i get my headphone to work with the iphone? Are there some settings
    that I need to turn on so I can use my headphone while talking on the phone?

    Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack. 

  • How do I get the printer to work with AirPort?

    I have had my printer connected via USB cable to the AirPort for a while, but recently when I had to disconnect the printer for some home improvement, I ended up with problems.
    Upon reconnecting the printer to the AirPort, I started receiving this message:
    USB Power
    A device connected to this Apple Wi-Fi base station's USB port requires more power than this Apple Wi-Fi base station can provide.  Plug the device into a power supply if possible, or connect it to a powered USB hub.
    My printer is connected to a power source, but I still cannot print to it.  I can see the printer when I send something to be printed, but it will not actually print.
    Does anyone have any ideas on how to get my printer to work again?

    Thanks for the detail. The dash separates the "main" and "guest" network.
    There are a number of settings that are 2.4 GHz on both networks. The only time the dash separates 5 GHz and 2.4 GHz is on the last 3 settings.
    Since the printer specifications available on the HP site show it is a b/g device only, I suspect that the printer does not like the current guest setting of 802.11 b/g/n you are currently using, which is also what it would be if the AEBS was set on Automatic.
    Try the following setting:
    802.11n only 5 GHz - 802.11 b/g
    It's really the only choice that would keep the 5 GHz that you want on the "main" network and possibly allow the printer to connect. Unfortunately, the optimal choice for range and speed is not the setting that you may need to work with the printer.
    If the printer still won't connect, I would call it a day and when it comes time for a new printer, look first for an ethernet device or at least an "n" device that will handle 5 GHz if you want a wireless printer. The advantage of an ethernet printer would be that it would also work over your wireless.
    Please post back on your findings.

  • How do I get Photos - iPhotos to work with my iPhone

    I have a 2 month old Mac Mini, and noticed a system upgrade available 10.10.3 - I always download all that are offered.  10.10.3 loaded, and I proceeded to open iTunes and iPhoto and plug in my iPhone, All went well until I noticed PHOTOS  I opened it to see what it was and was asked to selected a library as it seemed the only option on offer I did and found a mass of over 3500 photos  in folders that I did not totally recognise, including one of Face photos. It was only then that I noticed a NO ENTRY SIGN on iPhotos.  Thanks to some Mac Forum advice I have now been able to install a new iPhotos 9.6.1 to replace this but I now have a big problem that I cannot edit the photos on my iPad or iPhone.
    I have 10.10.3 installed with iPhoto-9.6.1 - PHOTOS-1 - iTunes-12.1.2.27 & iOS-8.3 on the iPhone & iPad.
    I Plug the iPhone into the Mac, iTunes can see it, click the camera icon I see a list of 30+ folders - 2 are ticked which are MC, it has 19 photos in it and PP, it has 1 photo in it - which is correct for the iPhone.
    In PHOTOS when I plug in the iPhone, a new command appears in the top bar  ‘IMPORT’  click on that and the iPhone icon shows on the left side with a box to tick - ‘open this device’ - click it and the message is ‘NO PHOTOS’. Under Albums I find the same 30+ listed with MC containing 50 photos & PP with 33.
    In iPhoto I plug in the iPhone & it is recognised with a  message on the right , LOADING… and there it stays STUCK but not crashed. Down the left side is listed the same 30+ albums, MC with 50 photos & PP with 33.
    Question - how do I get Photos/iPhoto/iTunes/to communicate with my iPhone/iPad, to update the photo albums as they did before 10.10.3 & Photos were introduced to my system????    Your help please

    Thanks for your help III
    BUT: I really don't get it! About ten days ago or so my iPhone 4s was suddenly able to hold on to the AirPort Express network.
    But then yesterday all of a sudden the problem was back again!!! I didn't do ANYTHING! It was just back out of nowhere! 
    Wi-Fi connection on my iPhone came on... and off... and on... and so on, while my MacBook was working perfectly fine with the network!
    So I reset the whole thing again on my MacBook with the AirPort utility, I reset the AirPort Express and I reset my iPhone... still not working... Honestly this freaks me out. Especially because it worked for more than a week and as I said I did not change a thing!!!
    Does anyone have any ideas how to solve the problem other then reset everything? Or is there an explanation around for this occurence???
    Thanks for your Help!

  • HT204490 How do I get Photos - iPhotos to work with my iPhone

    I went to my computer to download some photos on my iPhone and noticed an update available 10.10.3 - I always download all that are offered.  10.10.3 loaded, and I proceeded to open iTines and iPhoto and plug in my iPhone, All went well until I noticed PHOTOS  I opened it to see what it was and was asked to selected a library as it seemed the only option on offer I did and found a mass of over 3500 photos  in folders that I did not totally recognise, including one of Face photos. It was only THEN that I noticed a NO ENTRY SIGN on iPhotos.  Thanks to some Mac Forum advice I have now been able to install a new iPhotos 9.6.1 to replace this but I now have a big problem that I cannot edit the photos on my iPad or iPhone.
    I have 10.10.3 installed on a 2 month old Mac Mini, with iPhoto-9.6.1 - PHOTOS-1 - iTunes-12.1.2.27 & iOS-8.3 on the iPhone & iPad.
    I Plug the iPhone into the Mac, iTunes can see it, click the camera icon I have a list of 30+ folders - 2 are ticked which are MC, it has 19 photos in it and PP, it has 1 photo in it - which is correct for the iPhone.
    In PHOTOS when I plug in the iPhone, a new command appears in the top bar  ‘IMPORT’  click on that and the iPhone icon shows on the left side with a box to tick - ‘open this device’ - click it and the message is ‘NO PHOTOS’. Under Albums I find the same 30+ listed with MC containing 50 photos & PP with 33.
    In iPhoto I plug in the iPhone & it is recognised with a  message on the right , LOADING… and there it stays STUCK but not crashed. Down the left side is listed the same 30+ albums, MC with 50 photos & PP with 33.
    Question - how do I now get Photos/iPhoto/iTunes/to communicate with my iPhone/iPad, to update the photo albums as they did before 10.10.3 & PHOTOS, were introduced up the complete system????    Your help please

    Thanks for your help III
    BUT: I really don't get it! About ten days ago or so my iPhone 4s was suddenly able to hold on to the AirPort Express network.
    But then yesterday all of a sudden the problem was back again!!! I didn't do ANYTHING! It was just back out of nowhere! 
    Wi-Fi connection on my iPhone came on... and off... and on... and so on, while my MacBook was working perfectly fine with the network!
    So I reset the whole thing again on my MacBook with the AirPort utility, I reset the AirPort Express and I reset my iPhone... still not working... Honestly this freaks me out. Especially because it worked for more than a week and as I said I did not change a thing!!!
    Does anyone have any ideas how to solve the problem other then reset everything? Or is there an explanation around for this occurence???
    Thanks for your Help!

  • How do I get my Imessages to work with another iphone again after it has stopped working?

    My iphone use to always send imessages with my boyfriend's iphone now it will only send SMS texts, how do I get it back to sending Imessages with iphone? 

    You should of course make sure that they're both running the latest version of iOS (at least iOS5 is required) - connect to your computer and update from iTunes, if not.
    Matt

  • How do I get my printer to work with odd size paper.

     I'm trying to print a retun address on an envelope 5 3/4" x 4 3/8" and apparently I need to have a paper setting in my printer match the paper size in Word.

    Maryannebrabander,
    Your comment " ... It was printing great until I did this upgrade." brought to mind a thought:
    If you're ever in the SIlicon Valley area of California, specifically Mountain View, CA, I strongly recommend a visit to the Computer History Museum there.  This page from the Museum website shows a Calcomp plotter advertisement from 1969:
    http://www.computerhistory.org/revolution/mainframe-computers/7/161/689
    My question to you is should the iPhone be able to print to the Calcomp plotter?  If not, exactly how old would you have a printer (or plotter) be before you dropped support for it?  If you ever do drop support, then that would occur at some discrete time - one day it would work, then something would be updated and it would no longer work.

  • How do I get AirPort Express to work with my iPhone 4s?

    Hey there,
    I installed AirPort Express yesterday to make a wifi network out of the ethernet access that I have. It worked perfectly fine with my MacBook but my iPhone 4s does not seem to be able to hold on to the network! I can connect to the network and the wifi sign appears on the iPhone screen but after about 10 seconds it disappears again... and then it comes on again... and disappears again...
    Does anyone have the same problem? What can I do to resolve this?
    Thank you a lot for your answers in advance!

    Thanks for your help III
    BUT: I really don't get it! About ten days ago or so my iPhone 4s was suddenly able to hold on to the AirPort Express network.
    But then yesterday all of a sudden the problem was back again!!! I didn't do ANYTHING! It was just back out of nowhere! 
    Wi-Fi connection on my iPhone came on... and off... and on... and so on, while my MacBook was working perfectly fine with the network!
    So I reset the whole thing again on my MacBook with the AirPort utility, I reset the AirPort Express and I reset my iPhone... still not working... Honestly this freaks me out. Especially because it worked for more than a week and as I said I did not change a thing!!!
    Does anyone have any ideas how to solve the problem other then reset everything? Or is there an explanation around for this occurence???
    Thanks for your Help!

  • How d i get my printer to work on eprint

    how do i get my printer to work on eprint

    Hi,
    Does your printer support this ? What is it ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I get my printer to work after a Yosemite update?

    How can I get my printer to work after a Yosemite update?

    Hi there michaelfromepsom,
    You may find the printer troubleshooting steps in the article below helpful.
    Troubleshooting printer issues in OS X 
    -Griff W.  

  • HT4356 I can't get air print to work from my iPhone 4. I've verified everything. Th phone gets WIFI from AT&T. Computer's WIFI through Netgear, Charter.  How do I resolve this?

    I can't get air print to work from my iPhone 4. I have newest phone operating system, and the phone is air print enabled.
    The phone gets WIFI from AT&T.  My computer, to which my printer is wirelessly connected, gets WIFI from Charter Communications and a Netgear router. 
    That must be the problem.  How do I resolve that?

    For Airprint to work your iPhone and printer must be on the same local network. Your printer must support Airprint (see here for list: http://support.apple.com/kb/ht4356).
    Can you connect your iPhone to the Netgear router WiFi?

  • How can I get my iMac to work with scanners?

    How can I get my iMac to work with scanners? The scanners scan just fine, but not to my iMac. I've tried Epson and HP all-in-ones; it makes no diffference. I'm becoming extremely displeased, but don't know at whom I should be displeased, the printer guys or Apple. Help?

    My Epson is able to do scans using Image Capture without any problems at all.
    Allan

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • How do I get Front Row to work with Lion?

    Hello fellow Mac users,
    How do I get Front Row to work with Lion? I have an iMac 27 inch computer and is the sole entertainment provider for my bedroom. I refuse to put a TV in my room and wanted to know how to get Front Row to work again on my mac? It seems that the upgrade to Lion erased the app.
    I have quite a few movies and series that I bought off iTunes and is a shame that I can't use a media center app like Front Row on Lion.

    I kind of have the opposite problem. I need to know how to turn off my remote on the computer. I am using the remote for my Apple TV and it keeps making the volume on my Computer go up and down (with annoying sounds).
    There used to be a way to un-sync the remote with the comp but I cannot remember how and the Apple help is not much help! I have Lion.
    Thanks!
    Best,
    Tony

  • How do I get my AppleID to work with iCloud?

    How do I get my AppleID to work with iCloud? It says that I have a valid ID, but that I can't use it with iCloud...
    How do I fix this?
    Thanks!!

    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

Maybe you are looking for

  • Fails trying to update Reader 9.1.3 with 9.0 language support.

    I have upgraded my reader to 9.1.3, selected my language "english", and ran the upgrade program.  The update program says I need to install Adobe Reader 9.0 Language Support.  When I try to do this, the error message is "Adobe Reader 9.0 Language Sup

  • Itunes not working on microsoft please help.

    hi, i got a new ipod nano 2nd generation for christmas and i loaded itunes on my laptop, but my mum accidently deleted it and so i downloaded it again. but now it wont open because it says: "itunes has encountered a problem and needs to close. we are

  • Open items list, authorization

    When I give authorization to a user under Authorizations>>Reports>>Sales Reports>>Open Items List - Full Authorization, the Open Items List does not show up in Reports (as it does for the super users).  We are using SAP B1, 2007 A, sp: 01 pl: 08. Tha

  • Line reset after faults in area

    Hi, A fault in our area caused my line to drop dozens of times yesterday. Now I am stuck at 12 db SNR and a slow connexion and low IP profile. Now the faults in the area have been fixed can I get a mod here to carry out a reset on my line to get me b

  • IPhoto losing keywords depending on photo orientation

    In my last post I was trying to figure out how to import a Photoshop Elements 5 catalog into iPhoto. I finally bit the bullet and wrote all the metadata to the files' EXIFs. I was reluctant to do this as it will trigger a 30GB incremental remote back