How do I get my RF signals transmitted via the Bluetooth protocol into Labview for evaluation?

Hi! I have a few questions about how to implement Bluetooth into labview. I do have a stream of 128 kbps of raw data that i would like to transfer with bluetooth and eventually get into a pc with labview. What kind of hardware do i need on the recieving PC side and what kind of software is recommended? Would be glad to get some advice to get me started on this matter. I think that the use of an USB dongle would be possible and just connect to the USB port. Is there any documented test on this matter and how it turned out? Maybee i should say that my system is a cable replacement that sends packets of 16-bit from 8 channels and it is important that this data wont be delayed to m
uch. Thanks for all answers, contacts etc /Peter

Petter,
A google search on Bluetooth and LabVIEW yielded a link to a National Instruments page ( http://zone.ni.com/devzone/conceptd.nsf/webmain/5EB9312A6470F16A86256E7500726F15 ) on this very subject. You might want to start there.
Dirk

Similar Messages

  • How can I read the trace data into LabVIEW for E5071B

    HI 
    I am setting up the measurement using vector network analyzer (VNA) E5071B controlled by NI 488.2. How can I read the trace data into LabVIEW and display on the graph? If anyone having an idea or know well about this process please give me the suggestion, I will much appreciate it.
    Many Thanks

    You want to start with the driver
     In case you do not know it, you can do the driver search in LabVIEW from Tools>Instrumentation>Find Instrument Drivers. You might also want to bookmark the Instrument Driver Network for information on what a driver is and how to use it.

  • How to I get my Apps I purchased via the App Store on my iPad into Itunes?

    Simple scenario. I purchased a used iPad. It came with some apps already installed, purchased by the previous owner. The first thing I did (probably a mistake), was start using the iPad as is, including buying new apps via the iPad app store. A few days in, I decided to start the sync process with my home computer and iTunes, and realized that the old apps the prior owner purchased would be erased if synced the apps, so I delayed. I have since purchased many more via my iPad. I don't mind losing the old apps he purchased, but now I think I will lose the apps I purchased, since they are not in iTunes. So, my question is, how do I sync with iTunes so I can keep the apps I purchased via the iPad App store?

    Since you don't have Sync Apps selected under the Apps tab for your iPad sync preferences with iTunes, with your iPad connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPad. This will probably transfer the apps purchased/downloaded with your iTunes account only. After doing so, select Sync Apps under the Apps stab for your iPad sync preferences with iTunes and leave this selected. With this selected, after purchasing/downloading an app with your iPad, the app will be copied to your iTunes library the first time you sync your iPad with iTunes after doing so. This also allows for deleting an app from your iPad with iTunes by deselecting the app under the Apps tab for your iPhone sync preferences followed by a sync. To re-installed the app later, reselect the app followed by a sync. After purchasing/downloading an app with iTunes on your computer, the app will be selected automatically under the Apps tab. Follow this by a sync to install the app on your iPad.
    All apps paid and free include DRM protection, which is tied to the iTunes account used to purchase/download the app.

  • How can I get photos that are tagged in the people tab into a new event? I am using a PC and Elements 12?

    Please help very frustrated trying to make a video for my parent's 50th anniversary. I have hundreds of pictures tagged in my mom and in my dad stack of pictures on the "people" tab. Is there anyway to drag them into a new event?

    Unfortunately, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

  • How do I get CPU / memory utilization information via the API?

    I can't seem to find anything in the iOS API that would give me information about CPU utilization (user, kernel, idle) and memory (free, pinned, idle, in use), but I see apps like System Activity Monitor in the app store that provide such information. Can anyone point me to the relevant part of the SDK?

    This is a quection for the Developer forum.

  • How do I get 2 layers to move at the same time?

    How do you get 2 layers to move at the same time?

    Thanks for the help folks, sorry I've been away.
    I'd love help with the problem of why I only one track seems to accept clips to play. When I drag them to other tracks or create a track by dragging the clips are grayed out and won't play, but if I drag them to the one track where they're blue they play.

  • How do I get  camera memory card out of the DVD slot?

    How do I get  camera memory card out of the DVD slot?

    Well, for one thing it shouldn't be in the DVD slot. You can try turning the computer on it's side and see if you can coax it out, but otherwise you will need to take it in for service because the computer has to be disassembled.

  • How can I get my iphone to stop losing the signal?

    How can I get my iphone to stop losing the signal?

    Thanks for the tip.  If only I could find somewhere where I did not lose the signal.
    I am based in the United Kingdom. The carrier is Orange.
    I lose the signal inside buildings and outside of buildings.  It happens at work and at home.  It happens in Centarl London in the open air and inside.  It happens in small towns.. It happens in the countryside.  It happens in motor cars.  It happens in airports.  It happens when the battery is fully charged, when it is half charged and when it's low on charge.  It happens using the phone, when reading messages and when using the internet.
    Hope this helps.

  • How do I get a video signal to an external monitor via the mini-display port on my Mac Book Air?

    I can't get a video signal out through my mini-display port on my Mac Book Air (version 1).  Thus I can't feed BBC iPlayer to an external monitor.  There is some connectivity - the MAC wallpaper is broadcast, the mouse pointer is visible and sound is transferred.  Is it likely to be a cable connection problem (though the cable works with a Windows operating laptop)?

    First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
    I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
    Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

  • I have a 120gb Classic that has no space left on it. i am going to buy a larger gb capacity ipod as soon as i get clearer instruction on how to get the old ipod content to the new ipod. How do you get content from one ipod to the other?

    how do you get content from one ipod to the new one? my content is on an external hard drive not on my pc and i have run out of space on my 120gb classic. can you get old ipod content to new? my itunes has only got short cuts, the real content is on an external drive? can this be done?? please help

    If the content is on an external drive, but your library knows where to find it, then it should all work. Connect your device, make some selections for what to put on it, and sync. If, on the other hand, your current iPod is the only place holding some of your media then see this user tip: Recover your iTunes library from your iPod or iOS device.
    tt2

  • How do i get on my apple account on the desktop without signing up with a credit card or Itunes card, i already have an account it just won't let me sign in without giving the desktop version a credit card

    How do i get on my apple account on the desktop without signing up with a credit card or Itunes card, i already have an account it just won't let me sign in without giving the desktop version a credit card

    SEARCH!
    http://lmgtfy.com/?q=itunes+account+without+credit+card

  • When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

    When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

    Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
    If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

  • HOW CAN I GET A DESCRIPTION OF ALL OF THE FRATURES IN lION 10.7.4

    How can I get a description of all of the programs that came with my mac pro without spending an arm and a leg?

    This is a good place to start and follow the links to all the Mac 101 articles.
    http://www.apple.com/support/mac101/
    Regards,
    Captfred

  • How do i get my iphone to sync with the itunes on my device?

    how do i get my iphone to sync with the itunes on my device?

    Try viewing this article:  http://support.apple.com/kb/ht1386

  • How do i get my podcasts to go from the one i just finished to the next one and how do i sort them from oldest to newest?

    how do i get my podcasts to go from the one i just finished to the next one withouth me having to click on it, and how do i sort them from oldest to newest?

    Not sure if you tried this, but did you hold down both the sleep and home button for 10 seconds? 

Maybe you are looking for