How do I get my themes to stay put. they change everytime I open FF.

My themes keep changing everytime I open FF. How do I get them to stay put. Your help is appreciated.
Thank you

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Similar Messages

  • Every time I shut down my computer, I lose all my settings - like things I removed from the dock are all back, the trackpad resets to original settings, etc.  How can I get my preferences to stay like they used to?  Thx!!

    I recently went through a nightmare with my computer where there was an "old" operating system put on my computer and I guess File Vault was turned on.  Since then I've upgraded and am now running 10.8.3 but got locked out of my old admin account when I tried to restore my computer from Time Capsule.  Attempts to recover anything from my old admin account have been futile
    So, I started a new Admin acct and have been trying to reconstruct my life, but every time I shut down and restart my computer, it erases/resets all my prefernces, like all the things in the Dock that I remove all come back and the track pad is always moving in the wrong direction again and has to be reset every time.  Is there a way I make my prefernces stick??
    BTW if anyone knows how to recover all my lost stuff that would be beyond amazing too
    Thanks in advance!

    Eustace, thank you so much for writing back.  I will try what you suggested!!
    thx for your reply - apparently when I went to the Apple store a long time ago, they restore maybe photos and itunes etc from my external hard drive (passport).  I guess at that time they reinstalled an earlier operating system than my macbook came with and that somehow corrupted FileVault.  apparently there was no sparse bundle (whatever that is) for my old admin account and they said that ever since the install of the older OS that it was actually NEVER backing up anything in my admin account.
    Then, I bought Time Capsule and starting backing up to that instead.  I started having problems with it being slow etc and then StartUp Disk full errors and didn't know what to do, so I "Restored" from Time Capsule and that's when I lost everything in my Admin account and was locked out when I tried to log in - it said File Vault error ..."
    anyway - that's THAT sad story.  I was told to create a new admin account and I've basically been trying to start over - even though I have a partial save of my computer in Crash Plan and I DO see a sparse bundle listed in there, but I just don't know enough about computers to know if it's something I can get back or if I am just totally doomed. 
    I'm afraid to reinstall anything because if there is even a remote shot that the other files are still floating around in my computer, I feel like that chance will be shot forever.  I need to hire McGee from NCIS, I just KNOW he could get those files back for me!!!

  • How do I get my soundtracks to stay together instead of separating them by artist?

    How do I get my soundtracks to stay together instead of separating them by artist?

    My bookmarks sidebar opens when I (accidentally) press Ctrl+b.
    You also can open and close the sidebar using
    View > Sidebar > Bookmarks
    If you are displaying the orange Firefox button rather than the classic menu bar, tap the Alt key to display the menus temporarily and then you can use the View menu.

  • My Aperture 3 library menu shows me that some photos, which are high resolution professional pictures, are less than One Mb file size. Are the full size masters held elsewhere, and if so how do I get to them ? You've guessed I,m a newbie - please help.

    In Aperture 3 and using File>Get Info, I'm told that many photos, which are 7+ Mb's are only One Mb or less. Are the full-sized masters held elsewhere, and if so how can I get to them. You've guessed I'm a newbie - just 2 months with Apple and I'm very confused - any advice would be gratefully received.

    You should probably have this thread moved to the Aperture Discussion group and you’ll find lots of useful tips in the threads there:
    https://discussions.apple.com/community/professional_applications/aperture
    Are you looking at these sizes within Aperture using the metadata view or inspecting them outside using the Finder and Show Package Contents?
    I am wondering how you are importing the pictures from your camera?  When you import from your camera, the right side of your display window will have a lot of options that you can select to grab your images from the camera. 
    Does your camera shoot RAW+JPEG?  If so, you may not be importing them correctly and only picking up the JPEGS.  You can import them so they stay together or separate them.  The master images are all at the Project Level whereas the views you see in Albums for example are aliases that point back to your Project.
    Here’s a good Aperture web site (I have no financial or other interest in this site) to help you using Aperture:
    http://aperture.maccreate.com/
    This article talks about RAW and JPEG images:
    http://aperture.maccreate.com/2011/05/24/matching-raw-files-to-jpeg-pairs-in-ape rture-3/

  • How can i get my items to stay in place and not cross over each other when readjusting the browser s

    How can i get my items to stay in place and not cross over each other when readjusting the browser size.
    Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
    Here's the link to the page all the pages & they all do it
    http://theatricalworkslive.com/
    Thanks in advance

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem.  Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How can I get my MacBook to stay on and not sleep when lid is closed?

    How can I get my MacBook to stay on and not sleep when lid is closed?

    try this: http://www.macupdate.com/app/mac/37991/nosleep

  • How can I get location services to stay on inside?

    I have a WiFi iPad 2 w/iOS 8.1.  I want to use PayPal Here that requires location services in my nursery.  It works fine outdoors but inside our metal buildings with metal roofs the location services do not work (and PayPal Here does not work) even though I am still connected to our WiFi network.  PayPal support is no help.  How can I get location services to stay on inside the buildings?
    <Re-Titled By Host>

    Got to Settings > General > Autolock to set the lock time.

  • How do i get my macbook to stay connected to my wireless network . i have to constantly rejoin it when i go online.

    How do i get my macbook to stay connected to my wireless network . i have to constantly rejoin it when i go online.
    Wayne

    Open System Preferences > Network > Advanced, and see if your network appears in Preferred Networks. If not, do it

  • How do I get my iPhone to stay listed under devices on iTunes page after I have unplugged my iPhone from my Mac? My iPad stays listed under devices.

    How do I get my iphone to stay listed under devices on Itunes page after I have unplugged it from my Mac? My ipad stays listed under devices.

    Phone not recognised in itunes
    iPhone not recognised by iTunes on PC  or  iPhone not recognised by iTunes on Mac

  • How do I get a picture to stay when I move and scale it for my home screen?

    How do I get a picture to stay when I move and scale it for my home screen?

    Unfortunately that seems to be a known bug. And something we have to wait for APple to fix. THere are other threads on the same topic and some people have work arounds so you might want to poke around in the 'more like this' on the right.

  • How do I get a CD to stay on my hard drive?

    How do I get a CD to stay on my hard drive?

    Hi there curran100,
    If you would like for information about importing CD's to iTunes, take a look at the articles below.
    iTunes 11 for Mac: Import songs from CDs
    http://support.apple.com/kb/PH12278
    iTunes 11 for Windows: Import songs from CDs
    http://support.apple.com/kb/PH12486
    If this is not what you are trying to do, could you give me some more information on what you would like to copy to your hard drive?
    -Griff W.

  • How can i get the icons to stay at the bottom of my screen?

    How can I get the icons to stay at the bottom of my screen even after closing the application?

    When it's open, control-click its Dock icon and choose Keep in Dock.
    (72521)

  • How do I get the watch to stay awake longer?

    I noticed that when I am using the watch, it only stays awake for a matter of seconds before going dark.  For example, I was using the Stop Watch app and while trying to time something, the watch went dark after a few seconds.  This caused me to have to lower and raise my wrist again to access the app again.
    How do I get the watch to stay awake longer when using some of the apps?
    Thanks!

    I Think it varies with what app you're using, I just went on the message app & left it & it lasted for a good 10/15 secs before going dark plus like what DonCote said you can always just tap the screen to get the screen back up instead of flicking your wrist. Not sure whether apple will change this as they'll want to do anything to help battery performance...

  • HT5557 I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen.  How can I get the clock to stay at the top of the screen?

    I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen.  How can I get the clock to stay at the top of the screen?

    cktan124:   I searched around and found the iPad does not have a PRAM.
    Anyone else want to guess?
    I found many folks here trying to hide of the clock, but I need the clock.  I use a PDF on my iPad for my notes when I am speaking in front of an audience.  I need the clock so I can kep track of time.

  • How could i get other themes  but not in keynote, How could i get other themes  but not in keynote

    How could i get other themes  but not in keynote???!!!

    Create them yourself, specific, simple, easy and free.

Maybe you are looking for

  • How do I save into iphoto some images that have been emailed to me without having to select and save each one?

    Hi - I have received lots of emails with photos from a recent party, but I cant seem to select them and save them into iphoto as a group - so far I have been selecting them one by one, but I am getting a bit weary of that! I am sure there a faster wa

  • What are the Interfaces in ABAP

    Hi all, What are the Interfaces in ABAP ? send me any material on the same

  • ABAp Key Issue

    Hi ALL I have Install IDES 4.7 in my home pc and when i try to do ABAP Practice on the server ( SE11, SE38,  etc)  It Say that I am Not authorised develeoper . It demands Access key ..   Kindly provide me the key so that i can do ABAP Programming

  • My Verizon Plan (Need Advice)

    Hello, So here is my situation. My upgrade is coming around (though my two-year contract doesn't expire till like beginning of August) and my current phone is on its last legs. I'd really like to upgrade it. The thing is, I'm going back home (to Indi

  • System Administrator role OIM 11gR2

    Hi experts, I am trying to figure out which table in OIM 11gR2 stores the information for roles assigned to the user. I am specifically looking for users who have system administrator role assigned. The way to assign is through organizations, but not