How do I get my Third-Party Mail Server to deliver Mail quickly to BlackBerry?

With Gmail and Yahoo! the mail delivery is very fast.  We own/use a Windows Mail Server that is IMAP/POP/Etc. but sometimes it take mail quite some time to display in the BlackBerry device.  Is there a trick to it?
Thanks for the help.

With BlackBerry Internet Service (BIS) accounts e-mail accounts are polled every 15 minutes for mail. If mail is found then it is pushed to the device. Then the mail account is polled every 3 minutes (for 5 cycles) for mail. If there is no mail found, then it will be polled again in 15 minutes.
Gmail and Yahoo! Mail have special agreements with RIM that allow the mail to be delivered instantly, thus the instantaneous push. If you want your mail instantly pushed then you would need to create a BlackBerry E-mail Account (via your carrier's BIS web site) then configure your mail account to forward the mail to the BlackBerry e-mail account.
For example, let's say you have T-Mobile. You could create an e-mail account called [email protected] Then you would configure your third-party e-mail account to forward any e-mails received to the [email protected] address. This way the messages would come through instantly. More information on this is here: Methods of Receiving E-mail on BlackBerry
The only other option would be to use a BlackBerry Enterprise Server (BES) or a Hosted BES provider (like MailStreet or ExchangeMyMail).

Similar Messages

  • How can I get my third party plugins to work with PSCC?

    I use third party plug-ins from two different companies and they all worked during my PSCC trail period, but now PS won't recognize any of them. I've tried re-installing them using the custom install process, but they still don't work. Tech support has been useless, and I'm getting very frustrated. Can anyone here help?

    Are you saying your trial expired but you liked CC so you are now subscribing? Or are you saying you went back to CS6 or another previous version.
    What plugins are they?
    Did they work on the before on that build before you tried CC?
    I am just wondering if you are only allowed to use them once thats all, which in itself is a little wierd.
    Usually when people have plugin issues its to do with 32 / 64 bit ones, as they don't interplay with each other. Eg you trialled a 32bit bit cc and used the 32bit plugins, but actually subscribed to 64bit cc
    When you say tech support is useless, are you reffering to the plugin tech support or Adobe? Assuming you mean adobe did you try the plugin supplier?

  • How does one get a third-party, DRM-Free ePub into iBooks ?

    And please do not say, "Use iTunes", because I am asking this for a poor soul from the Dark (WinDoze) Side who chooses not to use iTunes.
    So, what path might there be to get a DRM-Free ePub onto this person's iPad 2 ?
    Thanks.

    email it, open the email and select the epub, a Open In... popup should appear and then you can choose to open in it iBooks.

  • How to do XMLDSig using third-party JCA providers?

    Hi all,
    Can anyone please let me know how to do XMLDSig using third-party JCA providers? The Sun XMLDsig documentation says that "A JSR 105 implementation SHOULD use underlying JCA engine classes, such as java.security.Signature and java.security.MessageDigest to perform cryptographic operations", but it doesn't say how to define the JCA provider programmatically. I don't want to change the Providers order in the security.properties file.
    Do we need to make any changes in the JCA provider classes to work with XMLDSig and XML encrypt?
    I'd appreciate your help.
    Joe

      How to identify whether the third party app has registered URL scheme or not. I also send a request mail to the third party app developers regarding URL scheme, but there is no reply from them.

  • How can I configure a third party VME board with A24 address space using a VME-MXI-2?

    Hi!
    We are trying to establish communications to a Galil Motion controller with a VME interface. Galil states that they are using a A24 address scheme with A16 data space for their board.
    I am confused how to configure that board in the VME chassis properly.
    The base address provided by Galil is 91Fxxx, I am assuming that the lower three nibbles are the registers that I can talk to?!
    How do I set the address range under the resource setting for that board?
    Also, I noticed in MAX that one board shows up with a slot number unknown, one with slot #0 and this board I have set to slot #1. I assume that the unknown part is for the PCI card that makes up for the 1/2 of the PCI to VME bridge?
    The VISA VIs (Register based access) returns either a bus error, an invalid offset specified or data. However, we are completely in the dark when it does return data, since the expected offset we are typing in causes one of the two errors.
    Our assumption of the problem is that we do not understand how to properly configure that third party board as a resource. It has also happened that the resource manager is hanging up the PC completely. Not even CTRL-ALT-DEL works and the MXI activity LED on the NI-VME-MXI-2 board stays on during the hand up.
    We would appreciate, if somebody could walk us through the configuration process, step-by-step. Specifically, please explain how to setup the base address and how the offsets relate to this on a A24 address scheme. We are completely new to the VME bus interface, so even trivial things may be unkown to us.
    We have browsed NI's page and manuals for explanations, however, we could not find any answers to our questions.
    We noticed a formula for an A16 board that takes the base address and adds the logical address to it plus 40hex. Do we have to do the same or something similar to the A24 board????
    We also came accross an option that would allow the board (NI VME controller) to share its memory with A24 or A32 space? Do we need to enable that? What is the purpose for that?
    Best,
    Markus Tarin
    www.movimed.com - Custom Imaging Solutions
    www.movitherm.com - Advanced Thermography Solutions

    When I did not get a response here, I had to open a ticket with support.  The short answer is that you cannot customize the SAML response when using Azure AD as an IdP.
    Response from support:
    I discussed the issue with senior engineers to get action plan for this issue. After doing research Senior engineers updated me that we cannot add a custom attribute to the default
    SAML response of Azure AD.
    Below is the link to get the list of available attributes
    https://msdn.microsoft.com/en-us/library/azure/dn195587.aspx
    As default SAML response from Azure AD , we have email address of the user sent out as attribute value for the Attribute " NAME ".
    They suggested me to configure the application we are trying to integrate with Azure AD in such a way that it transforms the Attribute  " NAME " into " EMAIL
    This was not particularly helpful in my case as I did not have any control over the 3rd party which specifically documented that they would not extract the email address from the name attribute.
    Cheers,
    Jeff

  • How to Launch a downloaded third party app from my own app on the iPad using objective c

      How to Launch a downloaded third party app from my own app on the iPad using objective c

      How to identify whether the third party app has registered URL scheme or not. I also send a request mail to the third party app developers regarding URL scheme, but there is no reply from them.

  • TS1702 How do you close a third party app without deleting it?

    How do you close a third party app without deleting it?

    The same way any other app gets closed.
    Tap the home button to return to the home screen.
    If you want to force quit the app, after returning to the home screen, double tap the home button to pull up the multi-tasking bar.  Then press and hold the icon for the app in question until the red x appears.  Tap the x and the app will force quit.
    All of this is covered in the User's Guide.

  • How do I get my hotmail to work on my ipad mail. It keeps saying unable to verify account information how do I fix this??

    How do I get my hotmail to work on my ipad mail. It keeps saying unable to verify account information how do I fix this??

    Hi there Robbonchelle20111,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    -Griff W. 

  • How can I set a third party application to access my organizations intranet through my organizations network

    how can I set a third party application to access my organizations intranet through my organizations network  . I am using blackberry bold 9700 OS 6

    Hi deepajithesh
    This feature is not available. Applications access the BlackBerry Network using the connection to BIS.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • I just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

    i just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

             

  • How do I get the red number of already read e-mails NOT to show up in the iMail icon on the dock? I only want the number of "unread" e-mails to display in red on the iMail icon.

    How do I get the red number of already read e-mails NOT to show up in the iMail icon on the dock? I only want the number of "unread" e-mails to display in red on the iMail icon.

    Your last post is blank, which happens a lot to users who try accessing the forum through email rather than its web interface.
    You are also in the wrong forum here.  We don't do Ps Elements here.

  • How do I get Autofill from Sarari to work on Yahoo. mail

    How do I get Autofill from Sarari to work on Yahoo.mail?  Autofill works on other sites, but will not remember username and passwork in Yahoo.mail.
    Thanks

    After hours restoring phone and resetting all my accounts and settings the Bluetooth is back on. Not sure how long this will last. In regards to AirPlay taking over, I had to drive far enough from our wifi signal to allow the Bluetooth to take back the audio. Its working for now.

  • How do I allow all third party cookies in my browser settings on my MacBook Pro?

    How do I allow all third party cookies in my browser settings on my MacBook Pro?

    pirihi,
    open Safari’s Preferences, and select its Privacy tab. For the “Block cookies and other website data” set of radio buttons, select “Never”.

  • How can I force the close of a third party ActiveX server.

    We have a third party ActiveX executable that refuses to shut itself down once in a while. And when I say once in a while, I mean one out of every 20-30 times it's attempted. All termination commands are being sent and recieved properly, and all refnums are being closed. No errors are ever generated, all operations report successful, but the thing just won't die. Problem is of course, that if we attempt to restart our software after the ActiveX app fails to terminate, it generates server execution errors when trying to open a new instance. We are not expecting a speedy resolution from the third party, but it is becoming a great inconvenience for our customers. I would like to be able to kill the process thro
    ugh the OS as a last resort. Problem is, to do that I need a ProcID. Is there any way to retrieve a ProcID for the ActiveX server through LabVIEW? Alternatives and suggestions are welcome.

    Hello codeman,
    Thank you for your inquiry regarding closing a third party ActiveX server. It sounds like the third party application is having trouble closing. There are several Windows Utility VIs available that could help in this case. One of the Utility VIs is called Get Window Refnum and should return an instance of a Windows window. The following links are great resources when dealing with this issue.
    http://digital.ni.com/public.nsf/websearch/136F6B1​F34CBB76E852563FC007AEFC7?OpenDocument
    http://sine.ni.com/apps/we/niepd_web_display.displ​ay_epd4?p_guid=B45EACE3EF4556A4E034080020E74861&p_​node=DZ53008&p_submitted=&p_rank=&p_answer=&p_sour​ce=External
    Other responses similar to these can be found on the ni.com website by clicking the support tab at the top
    of the home page. Then search for �refnum instances� from Technical Resources at the top of the page or topics similar to this. I hope these resources help. Let me know if I can further assist you.
    Shea C.
    Applications Engineering

  • How does one remove a third party program?

    how does one remove a third party program? Just "delete" it? Isn't there something to run?

    See Here >  Uninstalling applications
    Check the applications website for an uninstaller and use that. 

Maybe you are looking for