How do I get my two iPads to FaceTime between each other?

After I bought my second iPad I 'registered' it under my existing ID.  I can't seem to get FaceTime to work between the two iPads. I can't get FactTime set-up on the second iPad because it wants to change my ID. Do I need to change my ID and if so, how do it do this on one iPad only without changing the ID on the other?

If you want to Cascade this both the routers to each other then you can follow this link and it will help you in cascading this both the routers.

Similar Messages

  • How do i get my PC and iphone to recognize each other

    how do i sync my iphone to my PC, its recognizing to sync

    When an iPhone isn't recognized on a Windows computer the driver may need to re-installed. I've seen it too many times. Link below explains what to do. Look at the drivers first.
    http://support.apple.com/kb/ts1538
    Let us know if you need more help.

  • How do you get ipad2 and iphone4 Bluetooth to recognize each other? I tried turning on Bluetooth on both devices, but they can't detect each other

    I have been having a lot of trouble connecting my ipad2 and iphone4 via Bluetooth. My iPad detects every other phone nearby except my iPhone. It does not even detect my wife's iphone4. It does detect my daughter's iphone 3S. The is very weird cause my iPhone is on iOS5, while my daughter's iphone3 is on the older iOS.
    My iphone4 is simply unable to detect any other Bluetooth devices, apple device or otherwise.
    This is very frustrating indeed when such advanced devices cannot do a simple function.a
    Help anyone??

    my problem exactly. Did you ever figure it out? I had to resort to turning off labels in the web interface for Gmail. Not ideal

  • I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections.  How do I get the two networks to connect?

    I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections.  How do I get the two networks to connect to each other?

    Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl  This way I can just use one of the LAN outputs from the Airport to feed the FVS318.  Here is what I think I am hearing you say:
    Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
    To remedy the situastion here is probably what I need to do in order:
    1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
    2. Then, disable the Netgear FVS318G as a DHCP server.
    3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
    4. Restart everything.
    Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict?  I have the Airport Utility.  I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
    Thank you.
    Steve

  • How do I set up two iPads on one apple tv?

    How do I set up two iPads on the same apple tv?

    Launch it with the Shift key held down, or create a second Windows user account.
    (60390)

  • How do I get my Australian ipad to work in Sth Korea?

    How do I get my Australian ipad to work in Sth Korea? I'm in Jinju - went to the Apple desk at the Galleria, but they said I had to go to SK Telecom. I went to a small branch near my apt, and they said to go to a grocery store. I think I lost something in the translation.... I miss using my ipad - what do I need to ask for to get it working again (simm card? network provider? idk?), and who do I need to ask?! Hope you can help!

    How do I get my Australian ipad to work in Sth Korea? I'm in Jinju - went to the Apple desk at the Galleria, but they said I had to go to SK Telecom. I went to a small branch near my apt, and they said to go to a grocery store. I think I lost something in the translation.... I miss using my ipad - what do I need to ask for to get it working again (simm card? network provider? idk?), and who do I need to ask?! Hope you can help!

  • I just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

    i just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

             

  • How do I get all two or three hours of a podcast ?

    With the new itunes 11.0.1 I can only get the first hour of a two and sometimes three hour podcasts? How do I get all two or three hours?

    Easiest way is to click on the foreground colour which opens the Color Picker dialog box, and changes the cursor to the eye dropper.  Now click on the colour.  If it is crucial that it uses your selected area, copy the selection to a new layer.   I have no idea if you want a point sample, or average of entire selection or what though?

  • HT1414 how do i get into my ipad if i do not know the passcode and i dont want to erase everything on my ipad please help

    how do i get into my ipad if i do not know passcode and i dont want to erase the data i have on it

    Hello Mariemonkey82
    Follow the steps in the article below to put your iPad into recovery-mode so that iTunes can restore it.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Regards,
    -Norm G.

  • HT201302 Hi People! please help...I want to know how can i get photos from ipad to the computer, that were synchronized previously to ipad but from another pc that i dont have access anymore and these pics are now only found in this ipad and no other plac

    Hi People!
    Please help...I want to know how can i get photos from ipad to the computer, that were synchronized previously to ipad but from another pc that i dont have access anymore and these pics are now only found in this ipad and no other place.

    Hi Alan,
    Thanks for the help, but i've actually done that before.
    It does not help, because it only shows the photos on the camera roll and do not show the photos synchronized with that pc that i dont have access anymore.
    The photos/albums all appear on the ipad, i can see it without problems but i cant get them out of the ipad to save onto pc for backup.
    And i reaaly need it, as it is the only place that i actually have these photos now...

  • How can i get my iPhone, ipad mini and mac to show the same  contacts calendar and notes

    how can i get my iPhone, ipad mini and mac to show the same  contacts calendar and notes

    Plug the phone and iPad into your computer and sync them.

  • How do I get sound on Ipad without earphones?

    How do I get sound on Ipad without earphones? Or is it possible to get sound on Ipad without other software?

    The iPad includes an external speaker.

  • How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?

    How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?
    Also how can it be a line graph without plotting a circle at each value?
    Thanks this is very frustrating

    Make a copy of the table and produce your Line chart or Bar chart from the copy. Sort the copy into the order you want to see in your chart.
    Alternately you could use a Scatter Chart...
    Jerry

  • HT1212 my daughter forgot her passcode to her ipad mini.  How do i get into the ipad mini and reset the passcode

    my daughter forgot her passcode to her ipad mini.  How do I get into the ipad so I can reset it.
    thanks

    You will need to try to restore your iPad from the same computer that you most recently synced to.
    Read this: http://support.apple.com/kb/ht1212
    If you can't do the restore then you will need to try Recovery Mode.
    Read this: http://support.apple.com/kb/ht1808
    Follow the instructions very carefully.

  • How can I get these two results in two different columns?

    SELECT COUNT(attr_id)
    FROM pv_attribute
    WHERE port_id = 322;
    SELECT COUNT(attr_id)
    FROM pv_attribute
    WHERE port_id = 323;
    How can I get these two results in two different columns?
    Thanks

    So Jens made a tiny mistake with the column name... shame you couldn't be bothered to research Pivoting so you could have corrected the mistake (possibly it was deliberate *{:-) ) and learnt something.
    with pv_attribute as (select 16123 attr_id, 322 port_id from dual union all
                          select 16123 attr_id, 322 port_id from dual union all
                          select 19223 attr_id, 322 port_id from dual union all
                          select 11193 attr_id, 323 port_id from dual union all
                          select 13163 attr_id, 323 port_id from dual)
    -- end of test data setup
    select sum(decode(port_id, 322, 1, 0)) cnt_322,
           sum(decode(port_id, 323, 1, 0)) cnt_323
    from   pv_attribute
    where  port_id in (322, 323)

Maybe you are looking for

  • Trouble with clipping layers in Adobe photoshop CS5

    Posting in forums is new to me, but I am desperate for help, so I apologize if I am not doing things correctly. I just purchase cs5 recently because I changed from a pc to a mac.  I had cs4 on my pc and felt pretty comfortable with it.  I am a photog

  • How to LOOP AT dynamic internal tables.

    I have an internal table name declared in field I_DYN_TAB with me and I want to loop at this I_DYN_TAB. ( 4 example: DATA: I_DYN_TAB(10) VALUE 'I_TAB'. where I_TAB is my internal table with data in it.) I already tried couple of things. A. READ TABLE

  • "The message could not be moved to the mailbox Trash"

    I have the iPhone set up and doing what I want it to do but I can't delete any email messages. I am tied into my MobileMe account....no problem to delete messages from Mail or from the MobileMe web interface. Any ideas what to do? Thanks a lot for yo

  • PCR Based on Employee Group

    How to write a PCR for allowing the different types of WAGETYPES  based on different employee groups?

  • Can shut down problem be fixed?

    Since upgrading to my snazzy new iMac, I find that when I go to restart, after everything closes and the screen turns grey, I get the spinning gear, but it just keeps spinning forever.  I have to hold the power button on the back to force quit.  Some