How Do I get my two routers to work together?

I have had a wrt300n 1.1 for years and it has worked wonderfully. I have upgraded my cable to docsys 3.0 and I purchased a new modem and a D-Link825 dual band wireless router. The problem I have is that the DIR-825 does not support xbox360 and WiFi for my droid. The Dir-825 will not even accept the MAC address of my Droid.
So, can't I use the DIR-825 for the gigabyte wan connection to the internet, disable the DHCP on the DIR-825 and use the WRT300n set up as the DHCP server use a cat5 cable to the D-Link and let the D-Link do everything else as far as the admin part of the net goes?
D-Link says they are working on the issues but who knows how long that will be. I still have until the 30th of Sept to return the D-Link for a RMA. So if you have any other suggestions as to a better router setup please let me know. I also will be remotely administering this router and I want a secure connection through https for the remote. I have tried using the Netgear WNDR3700 but the admin is very lowsy and not encrypted. The access control is horrible. I have a teenager that I have to restrict access to or they will stay up all night on her ipod and xbox.
So fire away with any and all suggestions. I have been a loyal Cisco fan for years because of the superior admin abilities of their wireless routers. Additionally I have a MFC HP Printer I will use a Linksys sus4 printserver to or I may just get a wireless adapter for. This was why I went to the DIR-825, they are the only WAP that had a usb capable of printing ant for a NAS.
I am an MCSE so be as technical as you want, but I am not that familiar with the wireless admin. I have looked at several more expensive routers but I am hoping to put together something more reasonbly priced than the $300.00 SOHO options. Although that may be the direction I go.
Thank You
Joseph

If you want to Cascade this both the routers to each other then you can follow this link and it will help you in cascading this both the routers.

Similar Messages

How do I get all two or three hours of a podcast ?

With the new itunes 11.0.1 I can only get the first hour of a two and sometimes three hour podcasts? How do I get all two or three hours?

Easiest way is to click on the foreground colour which opens the Color Picker dialog box, and changes the cursor to the eye dropper. Now click on the colour. If it is crucial that it uses your selected area, copy the selection to a new layer. I have no idea if you want a point sample, or average of entire selection or what though?

How can I get these two results in two different columns?

SELECT COUNT(attr_id)
FROM pv_attribute
WHERE port_id = 322;
SELECT COUNT(attr_id)
FROM pv_attribute
WHERE port_id = 323;
How can I get these two results in two different columns?
Thanks

So Jens made a tiny mistake with the column name... shame you couldn't be bothered to research Pivoting so you could have corrected the mistake (possibly it was deliberate *{:-) ) and learnt something.
with pv_attribute as (select 16123 attr_id, 322 port_id from dual union all
                      select 16123 attr_id, 322 port_id from dual union all
                      select 19223 attr_id, 322 port_id from dual union all
                      select 11193 attr_id, 323 port_id from dual union all
                      select 13163 attr_id, 323 port_id from dual)
-- end of test data setup
select sum(decode(port_id, 322, 1, 0)) cnt_322,
       sum(decode(port_id, 323, 1, 0)) cnt_323
from   pv_attribute
where port_id in (322, 323)

I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections. How do I get the two networks to connect?

I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections. How do I get the two networks to connect to each other?

Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl This way I can just use one of the LAN outputs from the Airport to feed the FVS318. Here is what I think I am hearing you say:
Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
To remedy the situastion here is probably what I need to do in order:
1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
2. Then, disable the Netgear FVS318G as a DHCP server.
3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
4. Restart everything.
Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict? I have the Airport Utility. I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
Thank you.
Steve

I just bought an album on iTunes but didn't get the first two songs. I click on them to try to download them, but get a message to authorize my computer. My computer is already authorized. How can I get my two missing songs?

I just bought an album on iTunes but didn't get the first two songs. I click on them to try to download them again, but get a message to authorize my computer. My computer is already authorized. How can I get my two missing songs?

Sometimes, there would be temporary connectivity glitches preventing you from downloading a certain track from the iTunes store - these are rare and usually resolve if you try back in some time. If it continues, contact Apple support mentioning the name of the problematic song:
https://expresslane.apple.com/GetproductgroupList.action?locale=en_US&caller=cup

How do you get google re-captcha to work in Muse.

I recently added a contact form, using google's re-captcha, to my Muse website.
I pasted the site key and secret keys into the form.
Also pasted the script code in the Head tag, <script src='https://www.google.com/recaptcha/api.js'></script>.
And pasted the form code just above the send button, at the end of the form code.
<div class="g-recaptcha" data-sitekey="6Ldxf_4SAAAAALQzrikuctOLN6vXN6OLlvORenpd"></div>.
The form does not send any messages to my email address, and I have 2 re-captcha input boxes, the code above, puts the re-captcha box behind the name and email input text fields.
My question is, can someone explain to me the procedure to get my contact form to work with Google's re-captcha, in Muse CC 2014?

Thanks a lot David. I needed to ditch the form code, and forward my emails. I finally got it going.
Thanks for taking the time to help out, and I hope you have a great day.
JP
From: smeedee <[email protected]>
To: James Shea <[email protected]>
Sent: Thursday, December 4, 2014 6:36 AM
Subject: How do you get google re-captcha to work in Muse.
How do you get google re-captcha to work in Muse.
created by smeedee in Help with using Adobe Muse CC - View the full discussionHi,You don't need to add any code at all. Just the two keys. And you must upload before it will work. It won't work in preview. My advice is ditch the form code Hope this helps David If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6985109#6985109 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6985109#6985109 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I have two VI that works together?

How can I mix two VI that work together ? Does it work with Flat Sequence Structure or something's?

I've always wondered about that bracket-thingy, but I've been able to get along without it, so I don't worry about it any more.
Why would you want to try to program a doubly-charged carbon ion (C++), anyway? It's just going to find an oxygen ion or aromatic ring to react with, no matter what you do. You're sure not going to steer it towards another cation without going to Fermilab or CERN (Yes, I understand they use LabVIEW there).
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?

How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?

Oh, and it is on a macbook pro

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How can I get iCloud to accept my working Apple ID and password

My Apple ID and password works for iTunes and App Store. I'm trying to set up iCloud on my iPhone and iPad but i keep getting an error message that reads unsupported ID. Apple ID must be in the form of email address (@me.com). I don't have a MobileMe account. How can I get iCloud to accept my working Apple ID and password?

I've also reset my password to my Apple ID. I still get the Unsupported ID and password.

I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4. I plan to travel and want to take my netbook, rather than the laptop PC for travelling. How do I get my apple tools to work mwith a new, temporary PC?

I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4. I plan to travel and want to take my netbook, rather than the laptop PC for travelling. How do I get my apple tools to work mwith a new, temporary PC?

ayorico15 wrote:
It's not the pictures I'm worried about. I can get them off my phone without iTunes.
You can export ONLY Camera Roll photos and videos.
ayorico15 wrote:
All my apps were downloaded from my new apple ID. Not his.
Sign in to iTunes Store (on desktop itunes) with your ID. Plug your iphone to itunes, right click on it and choose transfer purchases.Right click again and choose backup. Then you can sync with iTunes.
ayorico15 wrote:
It's not the pictures I'm worried about. It's all my saved conversations
Your conversations will not deleted if you sync with your iTunes.
What is the problem with iCloud? iCloud has nothing to do with iTunes syncing.

How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
The published website is www.vibrationalvoyages.com.
When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

How do I get my Australian ipad to work in Sth Korea?

How do I get my Australian ipad to work in Sth Korea? I'm in Jinju - went to the Apple desk at the Galleria, but they said I had to go to SK Telecom. I went to a small branch near my apt, and they said to go to a grocery store. I think I lost something in the translation.... I miss using my ipad - what do I need to ask for to get it working again (simm card? network provider? idk?), and who do I need to ask?! Hope you can help!

How do I get my Australian ipad to work in Sth Korea? I'm in Jinju - went to the Apple desk at the Galleria, but they said I had to go to SK Telecom. I went to a small branch near my apt, and they said to go to a grocery store. I think I lost something in the translation.... I miss using my ipad - what do I need to ask for to get it working again (simm card? network provider? idk?), and who do I need to ask?! Hope you can help!

How Do I get my two routers to work together?

Similar Messages

Maybe you are looking for