How do I get my utilities folder with calculator and compass on my ipad?

What happened to my utilities folder?

The Calculator and Compass apps are not included in the iPad version of iOS, only the iPhone. You'll need to find an app that meets your needs in the App Store.
Best of luck.

Similar Messages

  • How do I get video I shot with my iPhone 4S to my iPad 2?

    How do I get video I shot with my iPhone 4S to my iPad 2?

    Either import them to your computer (see http://support.apple.com/kb/HT4083), then import them to your iTunes library and sync them to your iPad, or (more conveniently) use an app like PhotoSync or Bump.
    iCloud doesn't sync videos at the present time, although it was recently announced that iOS 7 (coming this fall) will include the ability to share videos as well as photos.

  • How do I download a slide show with captions and music to my IPad?  It is not happening when I sync.

    How do I download a slide show with captions and music to my IPad?  It is not happening when I sync.

    The way that you would transfer photos from iPhoto to the iPad would be to sync with iTunes. Connect the iPad to your Mac with the cable and launch iTunes. Select your iPad under the devices heading on the left. Then click on the Photos tab in the iTunes window on the right. You can select the folder from which you want to sync your photos in the drop down menu bar - so select iPhoto there. Then select the album or events that you want to sync from the windows below. After you have made your selections, click on Apply in the lower right corner of iTunes.
    I am not sure how the iPad will handle a slide show in the photos app that was created on your Mac. You can create basic slide shows on the iPad using the different albums, events or faces that you have in the Photo app, but as for the captioning that you have already set up, I don't know how that will work in the app when you sync the slide show.

  • How can I get music (not purchased from iTunes) and photos from my iPad onto my MacBook?

    I just recently had my hard drive replaced and lost all of my music and photos from it. I have all of my music and photos backed up onto my iPad and iPhone via iCloud.
    I was able to download all of my purchased music from iTunes, back onto my MacBook. The problem is, how do I get the other music and photos from my iPad, back onto my MacBook?

    Is there any possible way to backup music that I did not purchase from iTunes on to iCloud?
    No.
    ... if I happened to break my iPad, or if something happened to my Laptop.
    If you like your music library, back up your laptop.
    If you lose or break your iPad, you can sync your iTunes music library to a brand new one. You will lose nothing.
    If you lose your laptop, or it crashes, or becomes virus-infested, you can restore your iTunes music library from your backup. You will lose nothing. Without a backup though, your music resides only on the iPad, and extracting it will require the assistance of third party (paid) utilities. Worse, there is no guarantee they will continue to function after some future iOS upgrade, since the iPad is not designed to work that way.
    There are dozens of questions every day from people who lost their iTunes music when their laptop crashed. Your laptop will crash - it's only a question of when.

  • HT201272 How do I get my music off the cloud and save to my iPad

    How do i get my music off of the cloud and saved onto my ipad?

    Download past purchases - Support - Apple

  • HT4859 how do i get my storage out of icloud and back into my ipad

    how do I get my  ibrary games & photo's out of Icloud on my Ipad back into my restored Ipad

    The way you restore an iCloud backup is to go to Settings>General>Reset, tap Erase All Conent and Settings (which will erase the iPad), then go through the setup screens on the iPad and when given the option, choose Restore from iCloud Backup.  You will then sign into your iCoud account, agree to the terms and conditions, then choose the backup you want to restore from.
    Be sure you iPad is connected to wifi and your charger when you restore the backup as it may take some time to finish.
    This is described under "iCloud...How to restore from a backup" in this article: http://support.apple.com/kb/ht1766.

  • How do I get Address Book work with iCal and imail?

    I've used ACT! for years and I have not found a reasonable Mac alternative.  imail, ical and address book are great, but they don't play together.  Any suggestions?

    can anyone help with this, even if just to confirm that there is no fix?

  • How can one get java to work with SnowLeopard and FF13

    SInce the install of the most recent Java update (9)  for SnowLeopard (10.6.8) Firefox 13 simply advises that there is no plugin installed.  The behavior the update indicates will take place (where the web page provides the option to enable the plugin) simply has never presented itself. At this point, java is simply no longer available on a Mac running SNowLeopard and using Firefox.  Is there a solution to this other than upgrading to Lion?

    Yes. However, do note that FF is only on the machine for testing, I don't use it, preferring Safari. Any further issues with FF are best answered at http://support.mozilla.org/

  • How can I share the home folder with different accounts on the same mac?

    Hi, here's a question:
    How can I share the home folder with different accounts on the same mac?
    The whole point being not to have to install all my apps, and move all my files each time between users.
    The second thing would be to be able to modify one document on one account, and have it changed on the other account without having to copy it.
    I would like to have a pro and a private account on my mac.
    Thanks for you answers,
    Doug

    Your apps should not be installed in your home folder--they should be in /Applications where every user can access them.
    If you want to share things between users on the same Mac, use the /Users/Shared folder. Keep your home folder private. Trying to defeat the protections on the home folder subfolders just gets messy. I've never bothered to figure out all of the problems associated with it so I can't explain how to do it.
    Even with using Shared, you would need to alter the ACLs on the shared folder in order to allow both users to modify the documents.
    You must create a Group in Users & Groups and put each user in that group. Then create a folder inside /Users/Shared where you want to share the various files.
    Then, add an ACL to the shared folder that gives the group special permissions. on that folder.
    sudo chmod -R +a "<sharinggroup> allow delete,chown,list,search,add_file,add_subdirectory,delete_child,file_inherit,directory_inherit" /Users/Shared/<sharing folder>
    Replace <sharinggroup> and <sharingfolder> with the name of your group and your folder. Then, run the command in the Terminal.
    With that ACL, each user in <sharinggroup> will be able to alter the files created by any user in the group in that <sharingfolder>.
    Essentially, the client OS is not designed for true file sharing among the individual users. It is designed to isolate each user account from the others.

  • How can I get my downloads folder to appear in the docking station

    How can I get the download folder to remain on the docking station

    Note if you don't have any folders on your Dock, note the trashcan is on one side of the dock with a divider between it and applications.  Minimized windows (with the yellow button on the upper left corner) will go between the trash and that divider.  You can drag folders into the section between the minimized windows and the trash.

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • I have a white MacBook. I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

    I have a white MacBook and I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • HT1310 when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what

    when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what

    Here is an article that describes what it is supposed to do:
    Startup Manager: How to select a startup volume
    If no Volumes are shown, it is telling you there are no potentailly bootable Volumes attached. That means your boot drive has died or the bootable image on it is unrecognizable.
    What Mac Pro ? by year, GHz, number of processors, screen size?
    What Mac OS X ?

  • MacBook Pro gets a flashing folder with a question mark

    I start up my computer and I get this flashing folder with a question mark. I looked up on here how to fix it but I get lost when I get to the disk utility part. All that shows up is something called disk0 and below it it says Mac OS X Base System. I click on it but the repair disk button is greyed out. What do I do? Please help!

    The MBP cannot find the OSX.  It may be a HDD or HDD connection problem.
    Start your MBP with the OPTION key down.  Select the recovery partition.  From the 4 option menu select Disk Utility.
    Select Disk Utility>First Aid and run Verify and Repair.
    If successful, you should be back in business.  If not, the HDD may be faulty.
    Ciao.

  • How do I get fios to work with my new desktop w/ Windows Media Center

    Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
    also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
    ** computer specs**
    Product number NZ017AA
    Introduction date 30-Jun-2009
    Country/region sold in: United States,Canada
    Hardware Base processor
    Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
    Chipset AMD 780G
    Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
    Power supply 300W
    Memory
    Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
    4 GB* (4 x 1 GB) (32-bit OS)
    *Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
    Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
    Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
    This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
    Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
    Wireless Wireless LAN 802.11 b/g
    Video Graphics Radeon HD4350
    512 MB DDR2 memory
    I/O Ports: HDMI, VGA, single-link DVI
    Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
    Sound/Audio High Definition 8-channel audio
    ALC 888S chipset
    Network (LAN) Integrated 10/100/1000 Base-T networking interface
    Memory card reader
    Contains an Infrared receiver for remote control
    Supports the following cards:
    Compact Flash I
    Compact Flash II
    IBM Microdrive
    Secure Digital (SD)
    mini-SD
    MultiMediaCard (MMC)
    Reduced size MultiMediaCard (RS-MMC)
    MultiMediaCard Plus (MMC plus)
    MultiMediaCard Mobile (MMC mobile)
    Memory Stick
    Memory Stick Pro
    Memory Stick Duo
    Memory Stick Pro Duo
    SmartMedia
    xD Picture Card (xD = extreme digital)
    External I/O ports
    I/O ports on the front panel
    Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
    I/O ports on the back panel
    Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
    Expansion slots
    Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
    Drive bays
    Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
    Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
    Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

    Based on what you've posted, your computer does not have the right tuner.   You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
    QAM tuners to record local channels only
    This requires Windows Vista or Windows 7
    Hauppauge WinTV-HVR-2250
    SiliconDust HDHomeRun (info on a sale)
    CableCard tuner to record local and cable channels
    This requires Windows 7 + one CableCard from Verizon for $3.99/mo
    ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
    Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
    Make sure your computer has Windows 7 Home Premium (or better) installed.   That's necessary to support CableCard tuners.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Maybe you are looking for

  • Re posting issue

    Hi experts, I have a problem regarding re posting issue where during simulation of debit position for month July 2008, a message box 'No Entry Found Matching Selection' appears. Why is the message keep on appearing when I havent post debit position f

  • Small Query in Selection Screen and Screen.

    Hello Guys... I have Created a program using Selection-Screen 1000. and Screen 2000. At Selection-Screen I have written code Start-of-selection.   ok_code = sy-ucomm.   CASE ok_code.     WHEN 'BACK'.         LEAVE PROGRAM. end case. and At the user-c

  • Macbook pro vs macbook air- latest models

    I am looking to upgrade my mid-2012 Pro to one of the following latest models: MacBook Pro, 4GB 500GB HD or MacBook Air 4GB, 256 Flash Storage. I am in graduate school so I will using it for papers, research, etc but not for over two classes and not

  • Making a template

    I want to make a template for a kind of class. But I don't just want to specify the interface--I want to control 80% of the action of the class. Specifically I want to 1. Specify an abstract constructor or something like it. The best I've come up wit

  • Which software for panning & zooming on artwork?

    I need to insert some graphics of artwork into a project, and need to pan & zoom. I've tried MovingPicture from Stage Tools but I find I can't achieve a constant panning speed after a ramp, and I also get jaggy verticals. I believe After Effects will