How do I get my volume to work on the 4s

How do i get my volume to work again on my 4s it just stopped

Without more information on your problem all I can suggest is:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?

How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing? As it goes now, one clicks on the song in the new playlist where the arrow is and then chooses 'Play Song Next.' So, it plays next, but then the song after that is back in the old playlist. I want to use iTunes smoothly without the extra clicks I've had to do in order to get the playlist to continue. This is music for background while I play the violin at restaurants, and extra clicks and hassle is quite unappreciated, especailly since it worked fine in the previous iTunes.
Thanks.

At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there).

HT3310 how do i get my headphone to work with the iphone?

how do i get my headphone to work with the iphone? Are there some settings
that I need to turn on so I can use my headphone while talking on the phone?

Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack.

Hardware missing -AGP Graphics card. How can I get my FCE 4 working on the new computer? Cheers

Hi I have just upgraded my computer to Mac OSX 10.6.7 now I cant open my FCE 4. Message reads, Hardware missing -AGP Graphics card. How can I get my FCE 4 working on the new computer? Cheers

Thanks, just so I know we are talking about the same items please let me know - When you say "run Prokit" do you mean downloaded? Which I did. I dont have Prokit 4.0.1 if you are referring to that, do I need this first? Please explain what application name I am looking for if other than Prokit which is sitting in my "download folder" do I need to manually put it into the apps folder? Sorry if the questions are layman but this area is not a very strong point for me. Thanks for your help so far.

How do you get your volume to work on video?

Please help! I can't get my volume to work on video or listening to a video but it works every where else?

Did you set it up correclty? Have a look - this is for iMessage.
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
for FaceTime
http://www.trickyways.com/2011/04/set-up-facetime-on-the-ipad-2/

I have a Ipod Touch 2G that is stuck on the connect to Itunes. How do I get it back to work without the access of a Home Computer?

I have a Ipod Touch 2G that is stuck on the "Connect to Itunes Logo" How can I get it back in operating order with out the access to a home computer? Can anybody Help me? I need it back to work.....

Connect the iOS device to your computer restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can I get a LOV to work in the advanced search area

I am using JHeadstart 10.1.3.3.
We are doing a LOV lookup on User-id. When the user selects a user-id or just starts keying in a user-id I have my Jheadstart code to pull in the full-name whenever the client selects a new user-id or starts keying a userid.
Under UserId we have the following definition
PersonIdentitiesLOV
UserId <= UserId
FullName <= CombinedName
We set up PersonIdentitiesLOV so that "Use LOV for validation" is set to true.
When I tested my code, in the advanced search this is what happened:
1) When the client selects a user-id the FullName field gets populated
2) When the client just keys in the user-id then the FullName DOES NOT get populated.
Someone told me that there is a bug in JHeadstart in 10.1.3.3 where if you turn on the "Use LOV for validation" then it does not get executed in the Advanced Search.
How do I get around this problem.
If this does not work then how would it be best to display the full name whenever someone keys in a user-id. We are using this full name display for auditing purposes at the cashiers wicket whenever someone keys in a userid and does not recognize the person. We want the full name displayed along with userid for verification purposes.
Any idea on how to get this working?

This is not a bug, it is intended behavior.
In search fields you might want to search for parts of the name, using a wildcard, that's why the auto-complete is not working there.
If an end user wants to search the complete name, he can use the LOV to pick a value.
Steven Davelaar,
JHeadstart Team.

HT4124 How do I get my volume to play through the tv, when the Hdmi is plugged in?

How do I get the volume to play through the TV and not my MacBook Pro, when a HDMI cable is being used?

I don't think the Mac routes sound through HDMI, or else it's a TV issue.
Use a stereo mini to RCA breakout cable.

How do I get my volume to work?

I have the iphone4s and my volume won't work anymore. When I push the buttons on the side the little ringer icon shows up but not the little bar that tells you how high or low the volume is. Every now and then the volume will go on by itself but it only stays on for a couple seconds. When I talk on the phone it works and Siri works so it's not the speakers. Also I tried using a Bluetooth speaker and the volume doesn't work for that, but when I use an iHome it does work. Also when I FaceTime my volume works. But I can't play music or watch videos anymore.
I tried my headphones to see what would happen and at first they worked. But sometimes the music would stop and the same thing happened. There was no volume bar. So I unplugged my headphones and put them back in. That seemed to work and I just got used to listening to music like that. But these past couple days my headphones are hardly working and I'm so frustrated. Can someone please help with my problem.

Hello there, Fruitloops25.
The following Knowledge Base article offers up some great steps for troubleshooting the issue you're describing:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Learn more about troubleshooting iPhone hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How do I get my volume control working again?

It works when I'm talking on the phone or on bluetooth. But it does not work when I'm on pandora or watching a video on intenet. No volume or no volume control.

Try restroing from your Time Machine backup. Also you should be connected to a UPS so in the event of power outages or brownouts you have enough battery time to do an orderly shutdown. Had you had a UPS connected you would not have had this problem.

I-Pad Mini and Wi-Fi Connection-I-Pad Mini does not connect to the Wi-Fi while IPad and IPhone 5 works in the same location. Then when I go to another location the Ipad Mini works. How can I get Wi-Fi to work all the time like Ipad and Iphone 5?

I-Pad Mini and Wi-Fi Connection. At one location the I-Pad Mini will not connect to wi-fi, while I-Pad and I-Phone 5 works just fine.
Then at another location the I-Pad Mini works just fine. Are there any suggestions anyone can give me to get I-Pad Mini to work everywhere just like I-Pad and I-Phone 5?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How can I get my renders to work in the background?

Hi,
I installed After Effects pretty much without changing anything, so the settings are more or less default.
I'm using a Macbook Pro with OS 10.6.8 and After Effects CS6
I have enabled media and disk cache, max disc cache is at 100GB and I have an external drive (with 900GB spare) as the volume selected beneath that option. My internal SSD has not much spare on it. I previously had the internal SSD as the disc cache and still had this same problem.
My project is 1920 x 1080 25fps - And I'm trying to render to Quicktime. I've tried rendering to stills and then outputting to Quicktime (so as to have less computational effort), then running them through but the same problem persists.
If After Effects is the application in focus the project renders fine.
If After Effects is not the application in focus - ie. I work with it rendering in the background, the 'FINISHED' sound plays and the render is cut short a short while after I started working in another program.
The project render time is about an hour, so it's not really convenient.
I've googled extensively and posted this here before and no solution.
Please help.
Toby
ps. ADOBE: Don't mean to be rude, but is there some fix for this text entry box where the cursor randomly jumps to a previous line? - still broken guys!

Hi Todd,
Thanks, I've now installed the updates. Unfortunately the problem persists and furthermore, AME does not go the distance with rendering the full project, dropping the process after around the 5-8% mark (on first and second try).
I can render the project successfully if AE is left unattended in the 'foreground'
Please find attached screengrabs of my system profile and current AE settings (Disk and Cache settings were changed recently from having 100GB disk cache on external USB3 drive - still same behaviour).
I notice there is no error log produced from AE as it seems to think the render is successfully completed. Please advise if I can produce a log to help troubleshoot this problem, as it seems AME does not provide a workaround.
Thanks in advance.

How do I get my links to work in the footer?

It works fine in the footer in the preview function- until you click to another page and then it doesn't work. When I export it into html files, it does not work either, when I publish it to catalyst- still does not work. See my link below, what am i doing wrong?
http://rayamajhi01.businesscatalyst.com/index.html

It seems to work in IE 9.0 but not in Firefox and Chrome.
Try selecting all the information in the footer and "Move To: Master Foreground" and see if that works.
I think your Accordian widget might be interfering with the footer text.

How do I get a movie to work on the web?

I got it all worked out on iweb, but when I published my movie to the web all I see is the Q with a question mark in the middle of it. Help, please.

http://web.mac.com/kcarter10/iWeb/Site/Movie_files/Podcast-1.mov
Works just fine for me (Safari 3.1 and 10.5.2).
If you're using Safari you may need to use the keyboard shortcut Command-R to "refresh" the download.

How do i get an applet to work using the embedded server?

every time i use teh builder to make an html file to run the applet i get...
<APPLET CODE="applet.basic2" ARCHIVE="adfshare.jar,bc4jmt.jar,collections.jar, ...etc
HEIGHT="200" WIDTH="200" ALIGN="bottom">
This browser does not support Applets.</APPLET>
clearly, the browser DOES support applets because i can run them off the net.
is there anything i am doing wrong?
thanks for any advice.
Owen Brandon

In the Java Control panel check the "<APPLET> tag support" in the Advanced tab.

How do I get my volume to work on the 4s

Similar Messages

Maybe you are looking for