How do I get my voyager 510 bluetooth head set to work

How can I get my VOYAGER 510 Bluetooth head set to work it pars up gut no sound only through speakers

Per the following your headset uses the HFP or the HSP profile.  The iPod only supports the A2DP profile for headphones.
http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/std_adp.php? p_faqid=8079&p_created=1125099403&p_sid=OoSQvBuk&p_accessibility=0&p_redirect=&p _lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MzgsMzgmcF9wc m9kcz0mcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfc GFnZT0xJnBfc2VhcmNoX3RleHQ9UGxhbnRyb25pY3MgVm95YWdlciA1MTA!&p_li=&p_topview=1
Aslo see:
iPhone, iPad, iPod touch: Supported Bluetooth profiles

Similar Messages

  • How Can I get my JayBird Freedom Bluetooth Earbud Headset to Work with my MacBook Pro-Retina

    I have a 1st gen iPad and a relatively new MacBook Pro 15 Retina.  As well, I also have a Jaybird Freedom Bluetooth Earbud Headset (Mic/Stereo Speakers).  Finally, I have a Droid X (I'll explain in a minute why I mention this).
    My BT Earbuds can pair with my iPad and my Droid X just fine.  As a matter of fact, it can bind with my iPad for audio, and my Droid X for phone audio at the same time.  However, even when the Droid X and the iPad BT is disabled (on both), my MacBook Pro will not work with the Bluetooth earbuds.  I am able to pair them (it shows as a Jaybird Freed Headset, and shows that it can be used as an audio output/input device), but when I try to use the earbuds for audio, it almost hangs up for a few moments, then finally fails and reports that "there was an errr connecting to your audio device.." with the "stop using headset" as my only option.
    My MacBook Pro Gen 2 with Snow Leopard used to be able to pair with this headset.  I'm not sure if it is the OS or the newew generation laptop.  I have seen a few other threads on this, but no fixes that work for me.

    Just posted a problem I'm having connecting my Jaybird Freedom and iPhone5 (https://discussions.apple.com/thread/4716045). The Jaybirds connected fine with an iPhone4s and another (forgotten) device so I don't think the problem lies with the Jaybird. I'd be interested if you hear differently.

  • Voyager 510 Bluetooth stopped working with YouTube after 10.6 upgrade

    I have been using a Plantronics Voyager 510 Bluetooth headphone for several months. On 10.5.8, it worked fine with all sound applications: Finder, QuickTime, Safari/Firefox, Skype, iTunes.
    I recently upgraded to 10.6 (10.6.4 now) and sound works for all those applications except for sound from a web browser. When video, etc. is playing in the browser, I do not get any sound from the video playback, even though I can get the boops and bleeps when I hit the volume control keys, etc.
    Anyone have ideas about what might have changed? (Actually I did notice that the Bluetooth menu item changed from "Use as Audio Device" (in 10.5.8) to "Use as Audio Device (Mono)" in 10.6, but I don't think that should have changed the audio for the web browser.)
    Thanks.
    Message was edited by: AntonioEsteban

    Contact the headphone manufacturer to make sure they are fully compatible with Snow Leopard.

  • Will Plantronics Voyager 510 bluetooth headset work with the latest macbook

    i just received my latest new macbook last week and am considering buying the Plantronics Voyager 510 bluetooth headset for all voice communication over yahoo, ichat or skype (current version of skype has problems with leopard firewall, i hear skype guys are working it out to release a fixed version). So can someone tell me if they tried successfully using a bluetooth headset with the latest intel mac that ships with leopard?
    I am posting this new question after having read about the skype bluetooth headset threads on which i could not figure out the answer!
    Any help is appreciated!
    Thanks, neil

    Please see the "Voice Mail doesn't work with Bluetooth" item, as it would appear that some of the headsets do work, some don't. My Plantronics 520 no longer works with the Voice mail, but works with everything else. I have an old Motorola bluetooth (850) however, and it both works for calls, and is seen by the voice mail.
    By the way, this reference is to stay tuned, as the issue has not been resolved, but there are plenty of responses there, so you're not alone with Plantronics compatibility. Hopefully volume of issues will get priority on software fix.

  • How can i get my iPhone 5S bluetooth to work? It does not pick up other devices.

    How can i get my iPhone 5S bluetooth to work? It does not pick up other devices.

    Shairationgco wrote:
    It can't even detect my husband's iphone help!
    It's not supposed to. Why are you trying to connect your iPhone to your husband's iPhone?

  • Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Download the Brother Mountain Lion drivers here.

  • How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend

    How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend the scale is reset to 1 = 1.

    Thank you for checking, Tom,
    I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
    Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
    My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
    On both error messages, the URL I was checking was:
    http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
    The last URL was, of course, the URL generated by iWeb.
    So, my question still is:
    HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
    Any ideas?
    GG

  • How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?

    How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?
    There is no HP support for this old printer. I have tried to connect via ethernet (thru ethernet router), and it does not show up in printer preferences. The printer worked fine on system 9x but when I went to my new macs with system X no luck. This is a great B&W printer that prints at 18 x 24". I would like to keep it and not junk it, but its been sitting on my desk unused for some time now. Any thoughts or JUNK IT! Thanks, R.T.

    Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
    I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

  • How do I get rid of the silver header on my docs?

    How do I get rid of the silver header on my docs? I'm opening them as tabs but it remains?! Do I go full screen?
    I can't get my workspace to look like the tutorial videos?...

    yup, i'm a moron. welcome to cs6. thx

  • I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    There is only one thing that happens -- the Server does not respond.
    Your mac concludes that you must have entered the wrong password. That may happen once, but then other issues become more likely, and it keeps asking for a new password.
    Sometimes the Server is down for maintenance. Sometimes something is configured wrong. Some services do this on purpose to get you to use WebMail (pick up your Mail with your Browser) so they can show you some ads.

  • HT3669 how do you get your epson stylus photo r 2400 to work on 10.8.3

    how do you get your epson stylus photo r 2400 to work on 10.8.3?

    According to:
    https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=54861&infoType=Dow nloads&platform=OSF_M_X8
    Description: The latest Mac OS X printer driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
    Connect the printer to your Mac and power the printer on.
    Select the (apple) menu, then Software Update.
    Follow the on-screen instructions to install the available updates.
    Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
    Compatible Systems: Mac OS X (v10.8.x)
    If there is no software to update try adding it manually
    System Preferences --> Print & Scan  --> Click Button --> Select Printer
    Let me know if this works -

  • I'm stuck in iPhone Developer Program set up that i never started, how do I get my iPod to skip this and just work like normal?

    I'm stuck in iPhone Developer Program set up that i never started, how do I get my iPod to skip this and just work like normal?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • How can I get the PDF to retain margins set in Word document?

    Uploaded a Word 2003 document for conversion. Conversion to PDF successful, but the PDF has different margins and page breaks. How do I get the PDF to retain the set margins?

    Hi NancyS,
    If you're on Windows, you can try using the PDF Desktop printer to "print" your document to PDF format. Here are the instructions for installing and setting up the PDF Desktop printer: Install and configure Adobe CreatePDF Desktop Printer.
    Please let us know if you have better luck using the PDF Desktop Printer.
    Best,
    Sara

  • I have MAC OS X 10.6.8 (up-to-date). How can I get screen mirroring to my Apple TV to work?  The icon does not appear at top status bar..

    I have MAC OS X 10.6.8 (up-to-date). How can I get screen mirroring to my Apple TV to work?  The icon does not appear at top status bar..

    Welcome to the Apple Support Communities
    See > http://support.apple.com/kb/HT5404 AirPlay Mirroring is compatible with Mid 2011 and newer MacBooks Air, and OS X Mountain Lion.
    As you have Mac OS X Snow Leopard, you haven't got a compatible MacBook Air, so you can't use AirPlay Mirroring. However, you can use a third-party app as AirParrot to mirror the MacBook onto your Apple TV > http://www.airparrot.com

  • How do I get my plug ins (Nik and Topaz) to work on Photoshop Creative Cloud? [was:Plug ins?]

    How do I get my plug ins (Nik and Topaz) to work on Photoshop Creative Cloud?

    Contact the makers of your third party plugins and see if they have updates that work correctly with Photoshop CC 2014.
    Also, make sure you ran the installers for the plugins instead of just copying them, since you may be missing necessary support files for the plugins.

Maybe you are looking for