How do I get my web pages back to original size? My fonts are all too large and keep reverting after I change them back!

That has not worked. I do it and still it reverts. Isn't there a way to tell Firefox to just go back to default settings?

Similar Messages

When syncing Apps on my iPhone 5 through iTunes, they are all greyed over and I cannot make any changes. How can I fix this. It never happened with my iPhone 4

When syncing Apps on my iPhone 5 through iTunes, they are all greyed over and I cannot make any changes. How can I fix this. It never happened with my iPhone 4

Connect your device to iTunes and in the the window were all the apps are greyed out make sure the 'Sync Apps' checkbox (top left corner) is selected.

How can I get my web page to center in IE?

My web page aligns left in IE, but not in other browsers. Any suggestions? http://www.theolderuggedcross.com/

Hello,
you can write here, so it should not be this: "... some reason i could not create e new post." and you should see this:
If not you should ask Adobe. Particularly well I found that Adobe now also offers the chat. Here the link:
http://www.adobe.com/support/acrobatdotcom/supportinfo/.
Another "help-line" you will find here: http://helpx.adobe.com/contact/.
Hans-Günter

Ive just plugged my phone into my computer and it has synced automatically with i tunes,i tunes has removed virtually all the apps and now wont let me sync them back? it comes up saying ibooks could not be uploaded to your device?

i have just plugged my i phone 4s into my computer and it automatically synced with i tunes, i tunes for some reason removed all the apps and backed up my phone automatically. ive gone to put my apps back on and its showing me an automatic flash up message saying, i tunes could not upload ibooks onto your device,it must be authorised. Im signed in and im also authorised, ive de authorised and authorised my account now twice.ive deleted the app i books as i read it could be out of date now and still it wont let me sync my apps. its letting me sync some apps that i bought on my new phone and not my 3, i also had an old e mail address registered with these apps and this account but hotmail deleted it for some random security reason. i have also bought an i pad recently and that works fine with my i tunes.can anybody help me as i have an i phone 4s now with nothing on!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! this new i tunes is crap!!!!!!!!!!!!! never had problems before,all i did was change my e mail address last time and everything was fine with the old version!!

Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can I get the web page translated to English?Im translator is not doing anything.I was getting this feature with Google Chrome and Maxthon.

Recently i have installed the latest version of Firefox.Iwas happy to find imtranslator feature in this version.But in necessity it does nothing.At many times when i was confronted with webpages in German and Chinese I tried to get translated them to English using imtranslator.But there is no response from it.Previosly I was using Google Chrome and Maxthon.They were doing this just with the click of a button.But Firefox disappoints me.Actually I am thinking of reverting to Maxthon.If there is a way for translating webpages in full in Firefox please advise so that I can stick on.
Thanking you,
pnsdhrn

How do I remove IM Translator?

I just decommissioned my windows pc for a mac power book. How can I get my ipad to sync with the new computer without erasing all the apps and data on the ipad?

I just decomissioned my windows pc in favor of a new (to me) MacBook Pro. When I attempt to sync my iPad I get a warning that I will erase all content on the ipad in order to sync with the new computer. How do avoid erasing all the data on the iPad, and get the iPad and the new Mac/iTunes to be friends?

Best option is to use Windows Migration Assistant as Ralph noted.
Here's a better (updated) link to Windows Migration Assistant for Lion -> http://support.apple.com/kb/HT4796
Or if you only want iTunes (Migration Assistant let's you choose) copy the entire /Music/iTunes/ folder from your PC to /Music/ on the Mac.
FYI: A MacBook is not a PowerBook. PowerBooks were discontinued in 2005.

I downloaded Firefox 3.6 and now my tool bar is gone. No back arrows, forward arrows, file, edit, view, history, bookmark, tools....how do I get my web browser to look like a regular browser again?

I downloaded the new Mozilla web browser and I had a Bing homepage setting. I changed back to yahoo but I ever since downloading I dont have any back arrows, forward arrows, file, edit, view, history, bookmark, tools, address bar....how do I get my web browser to look like a regular browser again?

For details of how to restore the menus see [https://support.mozilla.com/kb/menu+bar+is+missing]
Once the menus are back, you can use the View menu, then select Toolbars and click on the names of the toolbars to toggle displaying them.

How can I "expire" a web page (prevent BACK button access)

How can I "expire" a web page ?
I know some sites will display the following message if we click on the
BACK button in your browser.
Warning: Page has Expired The page you requested was created using
information you submitted in a form. This page is no longer available. As a
security precaution, Internet Explorer does not automatically resubmit your
information for you.
To resubmit your information and view this Web page, click the Refresh
button.
How do I implement this feature??

U want to disable back button click
if yes i think
javascript:window.history.forward(1);

NoSquint properly resized web pages, but the upper taskbars are still too large--for instance, I can only the beginning of the URL. How to fix?

After the latest Firefox version magnified everything, I used the NoSquint add-on (at 60%), which now makes web pages look as they did before. However, although the top two bars at the top of the screen are of normal size, the lower ones are still too large. The bar that contains the URL on the left and a Google search space on the right, for instance, can display only the first couple of letters of a URL (after the //).
How do I make these bars look the way they used to? Thanks.

Hi Anne, there is a setting in Firefox that controls the scaling of both the toolbar area and the content area. I'm guessing that you have your Windows font setting at 150%. In that case, I'm going to suggest you try to manually adjust the scaling in Firefox to 125% and then set NoSquint to 80%.
Here we go!
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''pix''' and pause while the list is filtered
(3) Double-click '''layout.css.devPixelsPerPx''' and change its value to '''1.25''' for the equivalent of 125% font size in Windows display settings.
If you view a tab with an address bar and this is not quite right you can adjust it to a different value, such as 1.2 (120%) or 1.3 (130%).
Please do not go lower than 1.0 or everything will start to get tiny.
Once that looks right, you can go back into your NoSquint settings and up your global zoom level for content to a comfortable number.
Can you get it the way you want?

How do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA certfificate i can't open web pages with this, how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC CA certfificate i can't open web pages with this

how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA ?

Hi
I am not suprised no one answered your questions, there are simply to many of them. Can I suggest you read the faq on 'how to get help quickly at - http://forums.adobe.com/thread/470404.
Especially the section Don't which says -
DON'T
Don't post a series of questions in a single post. Splitting them into separate threads increases your chances of a quick answer.
PZ
www.pziecina.com

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How do I get Apache web server working ...

How do I get Apache web server working on my MacBook Pro, which is running Leopard 10.5.8?
When I enter 'http://localhost/~username/' (without the quote marks) as a URL in my Firefox browser on the MacBook, I do not see any result at all(!). I do have Web Sharing on in System Preferences on that machine. But the browser does nothing whatever for that URL ...
On my other computer, an iMac running Leopard 10.5.8, when I enter 'http://localhost/~username/' I see the default "Your Website Here" page. That same default page is in fact the index.html file I expect to see on the MacBook Pro. But it isn't getting invoked for some reason. Nothing is happening ...
When on the iMac I try 'http://10.0.1.18/~username/' (10.0.1.18 is the local IP address I see under 'Web Sharing: On' on the MacBook) I get "Unable to connect: Firefox can't establish a connection to the server at 10.0.1.18."
When on the MacBook I try 'http://10.0.1.5/~username/' (10.0.1.5 is the local IP address I see under 'Web Sharing: On' on the MacBook) I see the default "Your Website Here" page.
It is the same on my iPhone: Using the same local IP addresses and usernames, Safari can see the index.html page on my iMac but not on my MacBook.
It looks as if Apache is not working on the MacBook, while on the iMac it works fine.
On the MacBook I can see (after I use 'defaults write com.apple.finder AppleShowAllFiles TRUE' in Terminal) a /private/etc/apache2/ directory with what look to be(?) the usual contents. So it looks like Apache is duly installed, as far as I can tell.
On the MacBook I don't see a file at /private/var/log/apache2/error_log, which is the location for 'ErrorLog' given in the httpd.conf file.
That about exhausts my understanding of how to get a handle on my problem.
Any advice or suggestions from those who have more expertise with Apache will be much appreciated ...

Okai, so we are getting somewhere, but not quit there yet :-)
I opened the Kenneth.conf file using the command: vi Kenneth.conf
This is what it said:
<Directory "/Users/Kenneth/Sites/">
Options Indexes Multiviews
AllowOverride AuthConfig Limit
Order allow,deny
Allow from all
</Directory>
"Kenneth.conf" [readonly] 6L, 139C
I therefore changed the AllowOverride from AuthConfig Limit to None, which was the only difference from what you posted above. Something did change, when I tried to open XAMPP it prompted me a password, but Apache still wont start :-/

How do I save a web page so that someone else can open it?

Sometimes I want to save web pages as archives for future reference. I thought printing as a PDF would be the most widely readable format, but items on the page are often lost and I end up with question marks.
I have just tried "Save As" to a web archive, and that works well in Safari (meaning that Safari can reopen it perfectly), but when I emailed the file to a PC user they couldn't open it. I assumed a web archive format would be readable by any web browser; obviously that's not the case.
How do I archive a web page so that it is universally readable without losing any content?

A web-link won't work because the particular page I want to send requires a subscription. The story about this particular page I want to send: four of us are planning a 7-day hiking trip through some Tasmanian wilderness, and we don't go unless the weather forecast is fine. I am subscribed to a weather website, but when I send this link:
http://www.weatherzone.com.au/models/meteogram.jsp?lt=twcid&lc=9350
they don't get the meteograms (graphs of various weather aspects out to 10 days).
So, I want to save the particular page and send it off. In general, though, I simply want to archive certain pages.
In my limited testing it looks like:
• Safari can't save a web page accurately;
• Firefox can, but it generates a separate folder of files ( I would have to combine the two, then zip them, then email);
• iCab may be able to, but I haven't tested it yet.
I didn't think saving a web page, incorporated into a single file, would be so complicated.

How to export the Apex web page to PDF with click of a button?

How to export the Apex web page to PDF with click of a button?
Am looking at exporting the Form view on APEX to be exported to PDF.

In order to get a PDF, you need to generate a Report....in PDF format.
If you are using the APEX Listener, you can initiate the download of the PDF by calling APEX_UTILS.download_print_document() (I normally place this in a Process)
BUT -- You have to create the Report (under Shared Components) and a Template (also under Shared Components).
The white paper in my first post gives you the HOWTO "[Create] Custom PDF Reports with Oracle Application Express and the APEX Listener".
Start by creating a Report (in Shared Components, bottom right) that uses a simple SQL statement like:
Select * from emp where empno = :P15_EMPNO
You may need to hard code the parameter before you hit "Download XML" button.
The XML that you get from clicking "Download XML" satisfies the "Step 1 - Create an XML Data Source" found on Page 11 of the document.
The rest of the instructions is in that whitepaper.
MK

After upgrading to 8.0 the add-on compatability tool runs and the Getting Started web page loads every time the browser starts.

After upgrading to 8.0 from 7.0.1 every time I start FF I get the add-on compatibility tool to run and the Getting Started web page loads along with my homepage in separate tabs as well. So far I have tried running the installer again, disabling all add-0ns and custom settings and restarting and turning off automatic updates. Nothing worked there. I got the same behavior each time. I don't know what else to try other than a full uninstall and reinstall. Something I'd like to avoid if it's possible because of the time involved. This is the second time I have posted regarding this issue. The first time I didn't get a response. A solution or a possible workaround would be greatly appreciated if anyone knows of any. As a staff member and a global forum moderator for an anti-virus company I understand how hectic things can be at times but some feedback, good or bad, on this issue would be very welcomed! Regards, Ritchie...

Hi michaell, thanks for the reply. I tried everything in the Preferences are not saved link you provided and nothing worked there. If creating a new profile will delete all my add-ons and custom settings I might as well just do a complete uninstall and reinstall. That actually would be easier. That article told me how to save my bookmarks though so I don't have to loose those which is nice. I don't know if this makes any difference but there is a discrepancy between the preference file in the article which is: prefs.js and what's showing on my PC which is: prefs with no .js suffix. I tried to rename the file to prefs.js and restarted. No luck there either. It just created another prefs file. I guess we've pretty much exhausted all the avenues to try! I'm just going to go ahead and do a reinstall when I get the time. Thanks so much for your help michaell. I do appreciate the effort. Regards, Ritchie...

How do I get my web pages back to original size? My fonts are all too large and keep reverting after I change them back!

Similar Messages

Maybe you are looking for