How do I get off this list-I've tried changing my settings and am still getting inundated with emails-help

I have changed and saved my settings several times and still continue to get emails. Where do I go to stop this.

From your profile page, click Edit Preferences and on the next page, click the Email Notification Preferences tab and select No for either all the options or the desired ones.
B-rock

Similar Messages

HT4085 I have a I pad MD522LL/A version 7.0 and cannot get off of mute I have tried items in settings and moving back lock switch as well as volume any help

I have a I pad MD522LL/A version 7.0 and cannot get off of mute I have tried items in settings and moving back lock switch as well as volume any help

Hey there,
It sounds like you are unable to get any sound from your built in speaker on your device, even after toggling the side switch. I recommend the troubleshooting from the following article named:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
The article title mentions the iPhone, but the steps are relevant for the iPad as well.
Thank you for using Apple Support Communities.
Regards,
Sterling

How do I get rid of the dropdown list history on the location bar? I have tried changing several settings and all I have done is mess up my ability to open ZIP downloads.

I wanted to clear the drop down suggestions/history list on the location bar so I went to Tools/Options and tried changing several settings. I could not get the results I wanted. Suggestions?
I did get one unwanted result -- or maybe just a coincidence. I received an email with attached pictures in a ZIP format and I could not get the download to open. Suggestions?

Tools > Options > Privacy > Location Bar: When using the location bar, suggest: Nothing
See [[Smart Location Bar]]

I can't get the two finger scroll to work, I have changed the settings and it still does not work. What do I do?, I can't get the two finger scroll to work, I have changed the settings and it still does not work. What do I do?

How can I get the scroll to work?

Thanks for replying!
It's something else to try! I am quite savy, just frustrated over what should be a simple update!!!!!
I did however try and install iTunes 10.7 on a different computer, which is clean as I ran anitvirus on it this morning, prior to downloading itunessetup.exe and it did the same thing on there too.
Having spent nearly two days trawling the internet for help I am beginning to wonder if it is not a problem with 10.7 itself? Seems like quite a lot of people have the same issues as me....and it can't be the same thing on everyone's computer!
I will try the antivirus on my laptop and go from there!!!
Thanks again for your answer.

Im keep on getting your app store id has been disabled. i change the password and its still doing it

im keep on getting your app store id has been disabled. i change the password and its still doing it

Check with iTS to see why.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

"Set Web Site Rule" window is annoying. how do i shut off this function it poped up more than a dozen times to connect to even this web site? then i had to click it another dozen plus times to get this site open !!!! ???

when ever i put in an address or click on a site a "Set Web Site Rule" window pops up asking if i want Firefox exe to allow some function to occur. it does not seem to be security related but rather simple functions. Step 1, step 2 , blah blah . "Set Web Site Rule" window is annoying. how do i shut off this function it popped up more than a dozen times to connect to even this web site? then i had to click it another dozen plus times to get the next mozilla site open !!!! ??? if firefox does not know what it is doing how can i??????
== This happened ==
Every time Firefox opened
== i am just setting up this pc how ever i down loaded the most recent version 3.6.3

by submiter - self solved: (thanks for the psychic help)
seems the problem was not with Firefox itself. Rather it seemed to have been an ad-blocker program called "WebMonitor" . i began by deleting Firefox and then opened Explorer (which i seldom do) and the same thing began to happen with MSN. So i
began deleting anti-virus programs till i came to the above mentioned freeware ad blocker "WebMonitor". it is a shame because i uised to have a program that blocked all ads on a web site which was such a relief to me.

HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
If I needed the lobotomized version I'd be using my iPad!
Any way (official or hack) to change this button back to its proper funcionality?
Thanks!

cterra wrote:
How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Every cut I make in the sequence window leaves one remaining frame from its deleted neighbor clip. How do I turn off this feature - It is driving me mad.

Every cut I make in the sequence window leaves one remaining frame from its deleted neighbor clip. How do I turn off this feature - It is driving me mad.

Here are 3 pictures detailing what I'm experiencing.
Picture 1; clip 1 tail frame.
Picture 2; clip 2 head frame.
Picture 3; clip 2 head frame is now tail frame of clip 1.
does this help describe what is happening? Basically every cut I make
leaves an unwanted frame as a ghost of the missing cut.
best,
Fred
On Wed, Dec 10, 2014 at 4:50 PM, Kevin Monahan <[email protected]>

When I open my image, it is covered with tiny coloured dots. how do I turn off this view?

when I open my image, it is covered with tiny coloured dots. how do I turn off this view? i've used photoshop for years and never encountered this. i looked at the histogram for some means of turning it off, but no luck. help

The issue I think is connected to the colour profile, and the 8,16, or 32 bit image mode option. In the past, my images have come from lightroom as 16 bit files and I've never had any issues. I guess I'm not very adept at the file handling aspect of this program. I shoot in RAW and like to play around with my photos, then print them. I was under the impression I should be using the srgb colour selection not RGB, but then I've read I should change it to RBG once I'm ready to save the file to print. I also changed my files over the 8 bit from 16 once I saved the after using photoshop.

I can only purchase 3 times per day,how can i turn off this sort of protection?

I can only purchase 3 times per day,how can i turn off this sort of protection?

You cannot go back, but you can fix the battery problem, which is NOT an iOS 7 problem. I've had much better battery life on iOS 7 than I have have had in the previous 6 years of iPhones. If you are not then there's something wrong with your phone, not with iOS 7.

I have Photoshop cs5, version 12.0.5. I keep being offered an "Update" to 12.0.4 and am puzzled. How can I turn off this offer or should this update be applied?

I have Photoshop cs5, version 12.0.5 x32 installed on a Widows box. I keep being offered an "Update" to 12.0.4 and am puzzled. How can I turn off this offer or should this update be applied? If it should be applied how to do it. When I try it, the update fails.
Thanks!

I found the answer in another forum thread...

When I turned on my device the inbox mail was empty, in time machine does not show options to find old back up, only inbox is not listed... how I can get my inbox emails back?

I turned my macbook on and all the emails of inbox were gone. In time machine, only the inbox option does not shows option to get back old back ups... how I can get my inbox emails?

I figured it out. I couldn't see the old backups because the sparsebundle had not been properly unmounted in a previous session, so it kept giving an "already in use" error. The problem was solved by restarting the Time Capsule through the Airport Utility, mounting the sparsebundle by double-clicking it, and then going through the "Browse other backup disks" option in the Time Machine menu bar icon.
The following links were helpful in figuring this out:
http://pondini.org/TM/C12.html
http://pondini.org/TM/17.html

HT201320 How can I get past, unopened emails on my phone? I can only seen new, unopened emails.

How can I get past, unopened emails on my phone? I can only seen new, unopened emails.

ayokunleade wrote:
I have a similar problem with my Z10, I'm unable to get mobile data connection except for Wi Fi connection on my Version unlocked device. Not even MTN Nigeria works. Anytime I do a OS upgrade check, it tells me I have the latest OS. What can I do? I'm so close to throwing the device into a furnace.
To all of you who have this dara service problem I ahve afew question for you
1) Where did you get you BB10 device, I mean did you get it where you are located or in another country (while on vacation business trip, etc...)
2) What is the device model, SETTING > ABOUT, check the field MODEL NUMBER it should say something like STL100-1, or STL100-2, or STL100-3, or STL100-4.
This very important, because not all phone will work for data everywhere, those model number that I have previously listed determine what are the frequencies that the phone will operate with, and if you carrier where you are is not using the same frequencies that the phone is design to use then no matter what you do it will not work unless you replace the phone with the proper model ofr your location
Using the Playbook and the Z10 and the Z30 and loving them
Martin

Workflow fails when page is created through the CreatePublishingPageDialog.aspx. The settings for this list have been recently changed.

Hi,
I've created a content type and attached a workflow to it so when I create a publishing page the workflow should run.
My Page creation is based on the "_layouts/15/CreatePublishingPageDialog.aspx" page in order to be allowed to fill in the required fields on item creation (so I don't have to go to the page afterwards and choose "edit properties").
On my page library I have "Require content approval for submitted items" and "Require documents to be checked out before they can be edited?" set to YES.
This design has worked fine before I added my workflow. However now when I click save or check in/publish I get the below error. My guess is that the workflow starts (and blocks) right after I fill in the filename and click next in the "CreatePublishingPageDialog.aspx"
step to go to the required fields.
If I go back to my page after I receive the error below I can edit the required properties again and then publish the page correctly.
How do I avoid this? thank you
My pages are created through
Checking the ULS log I get this error:
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The settings for this list have been recently changed. Refresh
your browser before editing this list.
at Microsoft.SharePoint.WebControls.BaseFieldControl.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Hi Jan,
Thanks for posting this issue, Kindly try out with the hot fixes provided in the below mentioned URLS
https://support.microsoft.com/kb/2536591?wa=wsignin1.0
http://elblanco.codeplex.com/releases/view/6856
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How do I get off this list-I've tried changing my settings and am still getting inundated with emails-help

Similar Messages

Maybe you are looking for