How do I get out of the Connect to Itunes screen on my iPod Touch?
How do I get out of the screen with the Itunes logo and the usb port to connect it to my computer? Earlier today I planned on updating my iPod Touch 5g to
ios 8 and I had just enough space left to update it. After the update was verifying, it put me on the screen to connect my ipod to iTunes, and every time i try to reset the ipod, it wont let me out of the screen. I don't want to update to ios 8 anymore, because everytime I try to restore the iPod, an error occurs. I am basically being forced at this point to update it, is there any way back to normal ios 7? Please help
Hi angelaa5508,
If you have issues with performing the update to iOS 8 you may want to use the steps in the following article to troubleshoot -
Resolve iOS update and restore errors in iTunes
Thanks for using Apple Support Communities.
Best,
Brett L
Similar Messages
-
How do you get your ipod to get out of the "connect to itunes screen"?
How do you get your ipod to get out of the "connect to itunes screen"?
Connect the iPod to your computer and restore via iTunes.
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad -
How do you get your iphone out of the connect to itunes screen?
How do you get your iphone out of the connect to itunes screen?
What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275
-
The apple logo appears for 5 seconds then disappears for 10 then appears for five and so on. I can get it to the connect to iTunes screen but as soon as I unplug it from the wall it shuts off completely. A laptop with iTunes isn't enough to power it up. Can anyone help me fix this?
Awesome. This is the iPhone 4 discussions! Have a nice day
-
How do I get out of the "no bootable device" screen?
I am doing a clean install of both operating systems and successfully deleted the windows partition, and reinstalled the Mac partition. When I got boot camp assistant started and it restarts to prepare installing windows, I am faces with the "no bootable device" screen. It says to insert a boot disk. Currently the Mac snow leopard disk is in the drive (in order to access certain disk utility functions, etc) but I can't get the disk out. I've tried force ejecting in every way and it won't eject.
So I try to boot back into the Mac partition by holding down option/alt, and it doesn't work. It just goes straight to the same no bootable device screen. How do I get out of this? Every suggestion I've seen is to hold down option and boot into Mac and I can't do that. It's almost like the keyboard does NOT respond at all while in the boot up process, can't force eject by holding keys, can't boot into anything by holding keys. Solution?an update on this in case anyone else runs into this problem. it turns out the mac os x install disk got rubbed the wrong way or something and was mucking up my entire computer by just being in the drive. i couldn't get it out, so i took it down to geek squad and they forcibly removed it.
after that i was able to hold down option and get into the mac partition i created earlier, which i wasn't able to do with that disk in the drive.
now i can most likely get back to installing windows on my partition, however the drivers are located on that install disk...so i'm going to be looking for ways to get around that. -
How do I fix the connect to iTunes screen on my iPod 4g without restoring it?
It's stuck on connect to itunes and i dont know to fix it without restoring because when i try to restore it theres an error 3194
Read this.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
i can not get my ipod to get out of the connect to itunes page , and when i plug it in it says itunes mobile device system is not setup
From what I know from troubleshooting all sorts of screwed-up PC devices, you should try the following steps (I have assumed you didn't try any of them, so plz don't take offence for some "basics"):
1) Updating the iTunes on your PC, or if it's already the latest, see if you can find the individual install package of "Apple Mobile Device Support" by using Window's Search (the package should be "AppleMobileDeviceSupport.msi") and reinstall it (Uninstall the existed one first). If you can't find the individual package, I think you may find a downloadable one online, or if you want to simply the process, just reinstall the whole iTunes.
2) If problem remains, check if there's any "application/service monitoring function" on your anti-virus/spyware program, and find if "Apple Mobile Device Support" is on its "blocked list", remove this entry when you find it.
3) Check if there's any "Registry" clean-up software/function in a software, or whether you've altered any apple-related or unknown registry entries. If it's a yes, see if you can find the most recent Registry backup before the iPod connection problem occured. In the case you do not have any backup (Make sure! Almost every Registry clean-up software would back-up Registry before any cleaning process. You can find them in this software's directory), simply use the "system restore" program of Windows to restore your computer to the latest point when iPod's connection with PC was still functioning.
Since we can't find any problems with "Apple Moblie Device Support" from above steps, let's refocus to the hardware part:
4) Restore the "setting part" to default on you iPod, if you don't want to wipe clean your setting now, try below steps first.
1) Plug in your iPod to other USB port, if it doesn't work, try plug in other devices to check if there's any problem with your USB ports or USB's drivers on PC. (If there is, try 'roll back' the USB driver's version by entering to its 'property' on right-clicked menu, if still doesn't work, maybe the USB ports are broken-down)
6) Go over the steps and check if you've tried everything. The latest choice I'd advise is to check if you can find another "USB cable" for iPod and plug-in so you'd know if the original is broken.
Well, that's about all I can think of. Good luck and post your questions if you need any clear-up. -
i got my ipod touch 4th generation and when i first connected it to itunes it would say device found on my computer but on itunes it would say no device found so im stuck with the connect to itunes symbol on my ipod touch like when u first turn it on
Try here. Start with the one the best fits your symptoms.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty -
How can I get out of the flashing Apple screen on Iphone 3 ?
How can I get out of the flashing Apple screen on Iphone 3 ?
Turn it off. While pressing and holding the Home button, connect it to your computer with iTunes open. Hopefully you will be able to restore it after that. If not, it requires service.
-
I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now, my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!
Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
Upon initial startup my ipad 2 is stuck on the connect to itunes screen.
how can i get around this and start using my ipad2 without connecting to itunes.If it hasn't got iOS 5+ pre-installed then you will need to connect it to a computer's iTunes in order to activate it.
Getting started guide : http://support.apple.com/kb/HT4053
The iPad manual also has a chapter on getting started - it can be downloaded from here : http://support.apple.com/manuals/ipad -
How do i get the connect to itunes screen off my phone
i tried to update my software to ios 6. and now my phone will not do anything and has a screen that says connect to itunes. what do i do? i connected it to itunes and tried downloading the software twice.. but didnt work.
You need to do we hat the Connect to iTunes screen is telling you to do. connect your device to your computer runningitunes and restore the device.
-
My Ipad has been stuck on the connect to Itunes screen now for days, it will not charge through the PC or wall charger. When plugged into the PC it is not recognized by it. Itunes doesn't see it and it will not let me reboot the system. How can I get past this so I can start using it again?
Hello Aloe_85,
This screen indicates that your device must be restored before it can be used again. The steps detailed in the article below can help get your iPad to reappear in iTunes so that it may be restored.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
How do I turn on my phone when it is stuck on the connect to itunes screen and I dont have Itunes?
I recently was using my phone and i cant get it to turn on because it is stuck on the Connect to ITunes screen and i dont have ITunes and cant download it either how do i get it to work...Please help!
Try a reboot
press and hold the home and power buttons until the Apple icon is displayed, then let go. -
many of the apps in my newstand won't let me get past the "connect to iTunes" notification. When i touch "OK" the same notice keeps coming back. What do i do.
Settings>Store>Your Apple ID - tap the ID and then sign out.
I only have one app in the Newsstand folder - the Sports Illustrated app. I have never gotten this message about connecting to iTunes so I'm not sure what that is all about. I would quit the Newsstand app and the other apps and the restart the iPad and see of that helps.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesnt work, reset the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Maybe you are looking for
-
import java.awt.BorderLayout; import java.awt.CardLayout; import java.awt.Dimension; import java.awt.event.MouseEvent; import java.awt.event.MouseMotionListener; import javax.swing.JFrame; import javax.swing.JPanel; public class G { CardLayout ca
-
A friend has an old 2006 17" iMac and the screen is shot. He was going to put it out with the garbage until I showed him that he could still use it with an external monitor. Now he's got a new iMac and gave me the old one. I was considering turning t
-
Weblogic deploying an already deployed application!
Hi, These are the following errors that I get. This is an already deployed application so not sure why weblogic deploys it again. This does not happen in all the machines. Can someone tell me why it is doing this and how to make the application come
-
What are the differences between 4.6B and ECC
What are the differences between 4.6B and ECC ?. Thanks
-
Need help in the code for updating a record ( conditional update)
all set Edited by: 871431 on Jul 9, 2011 6:30 PM