How do I get page numbers on the left and right side of the page?

I am finishing up a book in PAGES '08 on my Mac.
How do I get page numbers on the left and right side of the page.
I can get them on the page but I'd like them on the left and right sides.
Evan

If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
Control (right) - click on the open dmg icon and select "Eject xxxx" from the contextual window.
Then find the actual dmg file associated with those icons
and drag to the Trash in the Dock and empty.

Similar Messages

Why does iphoto want to chop off the left and right sides of the photo I'm trying to print?

Trying to print a group photo. Using the borderless setting, I still always lose half of the persons at the end of the rows. Why won't iphoto allow me to print the entire picture?

It actuallyhelps if you provide details including version of iPhoto and of the OS and what you are doing
with absolutely nothing but a problem my guess is that the print size is a different ratio than the photos size so somehting has to be left off - for example you can not print an 8x10 photo on a 4x5 piect of paper - depending on the camera you have your photos are either in a 3:2 ratio or a 4:3 ratio - the paper must be the same - or you must crop the photos to the paper size - or you must go to the customize screen and right click on the preview and fit to frame
onc eyou provide basic information more specific help can be provided
LN

How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

You can use this extension to set a default font size and page zoom on web pages:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well. Anyone know how to fix this?

All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well. Anyone know how to fix this?

Did you try restart the Mac?

It it possible to have info on the left and right sides of iweb templates?

When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

Hi
You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) www.willg4pb.com for iWeb tips

I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
Detlef

You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
1) There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
1) Record the audio just the way you have it. Two different recordings, one on each channel.
2) Copy the audio recording to a new name and open it in your editor.
3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
4) Repeat, only copy/pasting the right track into the left track and save the second recording.

Is it possible to disable the left and right 10% of the screen?

I know that in the home menu, iOS ignores the 20% or so of the margins if your thumb is there, so that you can use another finger to operate it even with a thumb touching the screen.
Is it possible to disable some portion of the screen to touch? Reading a book, etc, would be much more comfortable if I were able to hold the iPad more inward.

How do I make it so that it CAN?

Opened a .ai file, found that left and right side are cut off (landscape vs. regular the issue?)

Information all in the title. I open a .ai file and the left and right sides of the image are cut-off based on the "page" box

Did you open it in a lower version?
It looks like you opened the PDF part of the file instead of the AI part.

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

CS6: No more Left and right arrow in the timeline

Hi everyone,
Adobe removed the left and right arrows in the timeline. I don't understand why because it was a functionnality that I was finding very convenient when comes the time you have to move accurately in a zoomed timeline. The moving bar doesn't work very well in this kind of situation.
Do you now if there is a convenient way to do the same wihtout these left and right arrows ?
Thanks

If you are referring to these arrows in the CS5 interface:
They have been removed in CS6:
note:
If you're new to CS6 from CS5, just wait until you try to select
a transition vs. a cut point in the Timeline.

Will Apple ever put left and right arrows on the iOS keyboard?

Sometimes when I want to go back and fix a typing mistake or to copy certain words, it is a hassle to select the intended area. So I think it would be great if there were left and right arrow keys, or something like holding down one of the existing keys and moving to the left and right to move the cursor. I think that the space bar could work for that, maybe something like holding down the shift(up arrow) key and sliding left and right on the space bar.

http://www.apple.com/feedback/ipad.html

Half frame rendered black- as if a mask cropped the bottom and right side

Here's a mindboggler. And I'm sure it's totally my fault... Newbie here... I know I can go back and redo this in 2k but wondering if anybody has an answer that can save me days of work...
SO, I shot on RED, edited in pro-rez HQ, uprezed with Redcine to 3k prorez for FX- applied FX in AFX then rendered back to 3k. Compiled back in FCP then sent to Color... I found out then that Color can't work with 3k, so I changed my FCP comp to 1920X1080 and scaled the 3k images down to fit (in FCP). Resent to color and everything seemed fine. I did grading in color and rendered. Everything seemed normal until I looked at the renders out of color. The frame size is correct but the image looks like it has a backwards L across the bottom and right side of the frame. As if the geometry rendered only the top part of frame. I check the Geometry room and everything's normal.
Anyone know why it looks fine in Color but when rendering it comes out like this?
Thanks so much in advance.
Tim

What was the resolution setting sent to COLOR by FCP? In the "Send" roundtrip, all Geometry settings are ignored by COLOR in the render stage.
jPo

I went to the full screen and don't like it and need to know how to get back to what I had. Also, is there a good way to set up bookmarks? Like in a column on the left or right side? Thank you.

I went to the full screen and don't like it and want to get back to what I had. Also, is there a way to set up bookmarks so that all show in a column on the left or right side?

Just press F11 on your keyboard to exit full screen mode.

How do I delete a song from my Itunes library? I follow the instructions and right click on the song and click delete from the drop down menu but, then it asks me if I am sure I want to hide this song in Iclouds? I dont even know what Iclouds is?!?! HELP!

How do I delete a song from my Itunes music library? I follow the instructions and right click on the song and then select "delete" as specified and my info claims at that point it will ask if I want to send this song to my trash bin, but, instead, when I try to delete the song, I get another window asking "are you sure you want to hide this song in iCloud? I don't even know what iCloud is?!?!? I don't want iCloud and just want to get rid of old songs!!! HELP ME!!!

Short answer:
Click Hide Song(s), it is what you wanted to do...
Long answer:
iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
tt2

How do I apply effects equally to the left and right channels.

I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
Thanks!

How do I get page numbers on the left and right side of the page?

Similar Messages

Maybe you are looking for