How do i get past "Early Chipset"

I have a micron 512, 64 bit amd athlon, k8t neo fsr and it goes straight to early chipset initialization and hangs there. Power supply is hercules 400w, ps2 wheel mouse, standard keboard.....etc.
This all worked fine in the gigabyte board, but the board was bad. so i get the msi and it won't boot at all.
hhhhhhhhhhhhelp!

Hi, I have the same problem. My box used to work perfectly until yesterday...
Then suddenly, when I switch it on, it starts to make long beeps every two or three seconds and it doesn't boot. The diagnostic leds say it's in Early Chipset Initialization. Can anyone help me with this? ... please.
Here are my specs:
MOBO: MSI K7N2 Delta-L nForce2-400Ultra K7 FSB400
CPU: AMD Athlon XP 3000+, Freq 2167MHz, FSB 333, 512KB cache L2
RAM: 3 x DIMM 512MB DDR/333 KINGSTON KVR333X64
HD: 2 x Hard Disk Maxtor DiamondMax Plus 9, 120GB EIDE, Ultra ATA/133
VIDEO CARD: 3D PROPHET 9600 256MB HERCULES, AGP 8X, TV Out, DVI
AUDIO CARD: CREATIVE SOUND BLASTER AUDIGY 2
DVD-RW: Plextor PX504A
ETH: Netgear 10/100 FA311-50, 10/100Base-TX

Similar Messages

My new iphone 5 wont let me download music or apps i have to answer 2 security questions i dont remember my answers is been so long how do i get past this to get my music

my new iphone 5 wont let me download music of apps i have to answer 2 security questions its been so long since i have used these i dont remember the answers how can i get past this to download?

In order to get those to work you will have to upgrade to Snow Leopard 10.6.8.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard, preferably the full 10.6.8 combo updater.

HT1212 I took the passcode lock off of my iPhone 5 and now I can't get on to my iPad. It is asking for the passcode and when I use the one that was set up it locks me out. How can I get past this?

I have the iPhone 5 and with the new sofware update it added a passcode lock. Same for the iPad. I removed the passcode lock from my iPhone and now I can access my iPad. It is still asking for the four digit passcode. I tried using the one that was orgingally programed and it disables it every time. How can I get past this? I have tried to do a restore and it still takes me back to the lock screen. Please help!

Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

I signed into my Apple ID on a new phone and I already had it on my iPod. When I signed into the new phone it won't let me buy anything unless I know my old security questions but I don't know the answers to them. How can I get past those or change them?

I signed into my Apple ID on a new phone and I already had it on my iPod. When I signed into the new phone it won't let me buy anything unless I know my old security questions but I don't know the answers to them. How can I get past those or change them?

See Kappy's great User Tips.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
 Cheers, Tom

How do I get past a black screen on start up. I think it may have overheated.

My husband closed his MacBook Pro and later piled a bunch of stuff on it. When he opened it he had a black screen. If you turn it off it starts up with a white screen and the thinking wheel spinning and then goes back. If the touchpad it moved the curser is displayed. How do I get past the black screen?

Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

How do i get past a forgotten passcode on an ipod touch?

How do I get past a forgotten passcode and reopen a ipod touch?

Connect the iPod to your computer and restore via iTunes. yu may have to place the iPod in recovery mode to restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

I wish to reset my ipad. However, when I selectGeneral Reset Erase all content and Settings, I am prompted for a a Restrictions Passcode (which I have never set). I have now entered random codes 11 times and the ipad not reset. How do I get past this?

I wish to reset my ipad (as advised by the Apple Store) to attempt to resolve an issue with a non-responsive part of the screen.. However, when I select General>Reset>Erase all content and Settings, I am prompted for a a Restrictions Passcode (which I have never set). I have now entered random codes 11 times and the ipad has not reset. How do I get past this? I am now at the point where I have to wait 60 mins before I can enter another random passcode. I just want the ipad to clear down, erase everything so I can start again.

The other option is to force iPad into Recovery Mode.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad

HT4710 To update this application, sign in to the account you used to purchase it. It was pre-installed, how do I get past this message and update the software?

To update this application, sign in to the account you used to purchase it. The app was pre-installed, how do I get past this message?

The the account you used to "purchase" iPhoto is the Apple ID you used to set yoru couputer up with - log into th eApp store using that Apple ID and look under purchases - if you have not accepted the App yet then you will have to accept it first
LN

I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?

I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?

You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps.

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install.

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.

The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list.

How do I get past purchases back on my itouch?

how do I get past purchases back on my itouch? had to reset because of forgotten password... now what?

Update iTunes to 10.3.1
After you update iTunes, go to the iTunes store on your computer then click Purchased "new" under Music Quick Links on the right side of the iTunes window. You can re download past purchases there. Connect your iPod to your computer, select the Music tab from the menu then click Sync.

Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

Long story short: Simply get CC for teams. At 500 bucks a year it's a steal and those 5 licenses in the base package (or was it 10 even?) cover all your computers, at least the 3 ones you mentioned. For system requirements refer to the individual product pages.
Mylenium

Apple ID. My newly updated iPad 2 wants an email for the apple ID. My apple ID is not an email address. How can I get past the set-up screen?

My newly updated iPad 2 wants an email for the apple ID. My apple ID is not an email address. How can I get past the set-up screen?
I can't change my Apple ID. It would mess all my stuff up.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

When making a photo book, my iPhoto freezes during uploading the book to the store after assembly. I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large images. How can I get past this?

When making a photo book, my iPhoto freezes during uploading the book to the storey. I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large image files, but I don't want to reduce the image file size and compromise quality in the book. How can I get past this?
My macbook air is os x 10.9, using iPhoto 11 9.5 (902.7).

Try Old Toad's solution here: See Re: iphoto : upload impossible to print a book
Try to boot into Safe Mode and order this way, or sign into a different user account and try to order as a different user.
Léonie

HT201178 I have a Mac mini with Magic Trackpad and wireless keyboard. The keyboard and track pad got wet so I have purchased new ones. Problem is how do I get past the log in screen to set up the pairing of the devices? The old ones do not work

How do I get past the login screen to pair my new wireless keyboard and trackpad when the old ones are water damaged and don't work

Have you tried pulling the batteries out of the damaged ones so that they are completely off; then shutdown your Mac Mini via the power button on the back right. Turn on your new keyboard and trackpad then power your Mini back up? The auto detection should find your new keyboard and trackpad.

How do i get past "Early Chipset"

Similar Messages

Maybe you are looking for