How do I get PowerPoint presentation to display properly without having PowerPoint?

Suggestions on how to get PowerPoint presentation to display properly aligned on MacBookPro? These are available for download as ppt, pps & pdf
Our co just came out with new presentations in PowerPoint. They are going toward iPad2, & suggest using Documents to Go on an iPad. But I'm trying to play the presentation on my MacBookPro 13" (April 2010), Snow Leopard. I have iWork & so it opens in Keynote which does not display it quite right. The alignment is off--it appears that the relationships between text boxes isn't quite the same. So there is a long table with arrows pointing to the totals at the bottom but the arrows are over the text.
I tried looking at it in Parallels 5 (Win 7) & it opened in Open Office. That looked better, but several slides aren't aligned right. They have horizontal lines between bullet points & the lines "creep" so that as it goes down the page the lines move up closer to the text & then on top of the text.
Not real up on PowerPoint or Keynote, but I'm guessing maybe the resolution or something is different that throws the alignment off. I am learning Keynote but had just dabbled with PowerPoint & of course had played slide shows created in PowerPoint that had been sent to me which usually didn't have as much text. Also if its just me looking at it, I can manage if it isn't lined up right, but to show to others, it needs to look
I need these to display properly since this is something to use with prospective clients. Also the presentation is designed so that different offices can select which slides they want to use. Our office is not using all of them. So I need to be able to select the slides as well as have them display properly.
Wondering if I could choose a power point reader with the pps to play it rather than having Keynote if that would work, but not sure how to do that.
I think the pdf displayed properly, but don't think I can select slides with that.
So how can I be able to select PowerPoint slides, & get them to display properly?  At 1st I thought it might be that I didn't have the font used, but it shows as Trebuchet MS which also shows in my font list on the mac side.
I would prefer not to have to buy PowerPoint & would prefer to not have to use Parallels or Bootcamp, although I can if needed. I purchased Outlook 2007 for Windows which I used to use to sync with my old Win mobile phone. thankfully I was able to get rid of that & get an iPhone & now use the iLife aps rather than needing Outlook.
Also related to this presentation are related files that can be downloaded in either mp3 or mp4.  I really don't know what the difference is or why choose one or the other.
Message was edited by: KathiMR

OK, I found what seems to work. That is to open the actual ppt version of the download (not the one that had already been opened & saved in Keynote) in Open Office. So I had to open Open Office & then navigate to the file to open it so that it didn't open in Keynote.
At a One to One training on Keynote where I asked for help with this today he noted that it showed that the presentation had been created in an older version of PowerPoint--apparently 2003 for Windows which could explain some of the issues.
Opening it in Open office it displayed mostly ok.  There were 2 or 3 or so slides where I had to tweak horizontal lines between bullet points that had crept up so some where through the text rather than under it. So I just selected the lines & nudged them into position.
Its not perfect & for some reason, some of the lines seem a hair thicker than others (which I guess I could go back & figure out how to use the line thickness tool to adjust, but think I will leave well enough alone for now).
As near as I can tell, this seems to work about equally well doing this on the Mac side or in Parallels in Windows 7. So will stick with the Mac side.
This allows me to run the slide show with me controlling when the different bullet points, etc display. It didn't have any exotic animations or transitions--just rather plain vanilla ones.

Similar Messages

  • How do you get the restrictions off your phone without having to reset it?

    I forgot the password to my restrictions code and I don't want to reset my phone just to get the restrictions off.

    The only way to remove the restrictions without having to restore the phone is to remember the restrictions passcode. There is no way to bypass it, unless, as stefejobsfan points out, you have a backup that was made before the restrictions were put in place.
    If it could be easily bypassed, it wouldn't be worth squat.

  • How do I get gallery images to display properly in...

    Any pictures that are in portrait mode are shown with the top and bottom cut off

    OK, I found what seems to work. That is to open the actual ppt version of the download (not the one that had already been opened & saved in Keynote) in Open Office. So I had to open Open Office & then navigate to the file to open it so that it didn't open in Keynote.
    At a One to One training on Keynote where I asked for help with this today he noted that it showed that the presentation had been created in an older version of PowerPoint--apparently 2003 for Windows which could explain some of the issues.
    Opening it in Open office it displayed mostly ok.  There were 2 or 3 or so slides where I had to tweak horizontal lines between bullet points that had crept up so some where through the text rather than under it. So I just selected the lines & nudged them into position.
    Its not perfect & for some reason, some of the lines seem a hair thicker than others (which I guess I could go back & figure out how to use the line thickness tool to adjust, but think I will leave well enough alone for now).
    As near as I can tell, this seems to work about equally well doing this on the Mac side or in Parallels in Windows 7. So will stick with the Mac side.
    This allows me to run the slide show with me controlling when the different bullet points, etc display. It didn't have any exotic animations or transitions--just rather plain vanilla ones.

  • On a Mac (10.6.4), Firefox asks to download/save any websites with an .asp extension. How do I get these sites to display properly?

    Any website that uses the .asp suffix will not open within the browser. Instead, firefox asks to download the website. If I choose to open the .asp file with firefox in the download prompt, I end up in a loop of asking to download/open. The asp websites work fine in Safari.

    What's the error? You can also try the https://www.eff.org/https-everywhere extension

  • The last iTunes wiped out my audiobooks.  How do I get them back in my library without having to import them again?

    I just went to iTunes and realized that my audiobooks have been wiped out.  I just did an update for iTunes.  The audiobooks were the last time I went to look at them, but now they are gone.  I could use some help.

    I am happy to say that I finally figured out how to get my calendar back: I dug deep into the bowels of the phone, and discovered that syncing had been changed from "all events" to "one month." I changed it back, and - presto! - my life returned.
    I am sorry to say that I didn't get any help from anyone at Apple or on this forum. I don't understand why the Appleistas feel free to change these things without warning us, and without telling us how to fix them. I like this phone, but because of the company's institutional arrogance, I strongly doubt that I will ever purchase another Apple product.

  • Help. how do i get iphone out of recovery mode without having to restore

    hello,
    i have no idea why, but the new update for iphone did not work when i was downloading last night and the phone put itself into recovery mode. i havent synched it with my computer for a while and theres tons of stuff on there that i cant afford to lose if i choose to restore.
    after doing a bit of research i found iNdependence and iFuntastic. iNdependence constantly displays 'Status: disconnected waiting for iphone' so i cant do anything on it and iFuntastic i can not find where abouts to click to get the phone out of recovery mode.
    if anyone could help that would be fantastic!
    thanks

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • How can I get an invidivual Virtual Channel name without having to pick through an array of all channels?

    I see "Get DAQ Channel Names.VI" and "Get Channel Information.VI" but I just want to get the name of just channel 0, or just channel 1. Is using an array of all channel names the only way I can do this?
    I have Labview 6.1.
    THANKS!!!
    Lauren

    Lauren,
    Yes, currently that is the best way to go about accomplishing that. I attached a little VI that demonstrates a very basic way of finding the first virtual channel that uses device channel 1.
    Ames
    Applications Engineering
    National Instruments
    Attachments:
    Find_First_Channel_1_Virtual_Channel_Name.vi ‏27 KB

  • I tried to download a movie and the "Error (-50)" showed up and it stopped downloading 30 minutes in.  How can I get the rest of my movie without having to re-buy it all over again? Please help!

    I really just want to watch Frozen and it wont download.  The option to download it won't even show up anymore. I'm desperate for help

    err = -50 when downloading from store - https://discussions.apple.com/thread/3697501 - delete incomplete downloads from downloads folder as per http://support.apple.com/kb/TS3297
    iTunes Store: "Error (-50)" when downloading purchased content - http://support.apple.com/kb/TS1583

  • How do I get the esc key to work without having to use shift esc?

    Just got a new iMac and migrated everything from my old iMac but one thing is not working. I use to be able to use the esc key to back out of full screen mode or deselect items. It only works now if I use shift and esc. I would like to set it so I can just hiy esc and not shift esc.
    Any help woul dbe appreciated.
    Jeff

    Maybe some third party software interference.  Try a guest account or SafeBoot to diagnose.
    different app behave differently, for ex Firefox: command-shift-F

  • HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
    Hope this helps.

  • I have an ipod touch 2 and rebuilt my laptop.  Reinstalled ITUNES and can't find my applications on ITunes after login.  I tried to activate Itunes again but it didn't.  How can I get my applications to display on ITUNEs?

    I have an Ipod Touch 2 and rebuilt my laptop.  Reinstalled ITUNES and can't find my applications on ITunes after login.  I tried to activate Itunes again but it didn't.  How can I get my applications to display on ITUNEs?

    It sounds like you essentially have a new computer and unless you restored from a backup your iTunes library would be empty.  You can transfer your iTunes purchases from your iPod to the computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    SInce you changed syncing computers. after you move the stuff you need to restore the iPod to factory defaults and sync the stuff back to your iPod.  If you had the iPod backup file you could restore from backup.
    If you have non-iTunes pruchases you can copy them to your computer by using one of the third-party programs discussed in this previous discussion:
    Best iPod to PC

  • How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...

    (Running Business Objects Release 2 (Web-I), No other reporting modules)
    How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...
    In my reports, I count the number of tests of one of our products and another count on the number of failures.  I then use a simple formula to give me the defect rate percentage (DR%)
    The universe objects used in the calculation are:
    Assembly Number (dimension)
    Human Sn (dimension)
    Test Code Description (dimension)
    I created a variable (called [Count Assys]) that counts the number of Assemblies Tested:
    Formula: =Count([Assembly Number];All)
    Another variable (called [Failed Count]) counts the number of failed tests:
    Formula: =Count([Test Code Description];All) Where ([Test Code Description] <> "FUNCTIONAL TESTS PASSED")
    NOTE: There is a "not equal to sign" between [Test Code Description] and "FUNCTIONAL..." above, but the forum is blanking it when I preview the message.  Not a big deal, but it may be important for someone looking to help...
    I then have a third variable called [DR%] that divides [Failed Count] into the number of [Count Assys], which yields a number formatted as a percentage.
    Formula: =[Failed Count]/[Count Assys]
    The above works great! 
    The problem is: when I have a zero defect count (everything passes), the cell is blank, so the percentage variable remains blank.  I want a zero (0) to appear if nothing failed so the percentage appears as 0%
    I've searched this forum completely and have tried several Properties changes and different variable strings (like =If([Failed Count]<1,0) and the cell stays blank and cannot come up with an answer.
    This one seems simple to me, but everything I've tried has yielded zero <smile> results.
    Thanks,
    Charles
    Edited by: Charles Norman on Dec 9, 2008 12:44 PM
    Edited by: Charles Norman on Dec 9, 2008 12:47 PM

    Hi Charles,
    Use [Dr%] Variable formula as =if(IsNull([Dr%]);0;[DR%])
    Here IsNull returns the Boolean value of variable [Dr%] if its true then inserts 0 else the percentage values of failed tests based on the  total number of assembly tests performed.
    I Hope this is what you want to achieve....
    Thanks....
    Pratik

  • How do I get an App to display on all desktops in Mission Control?

    How do I get an App to display on all desktops in Mission Control?
    I tried:
    Right-Click on the icon in the Dock
    Options -> All Desktops
    This doesn't work.
    The App was created using REALStudio.  Does this have any bearing on the issue?
    SyB

    Hi, if the App is in the Dock, right click, choose Options>Open at login.
    Or System Preferences>Accounts>Login Items window, drag the App there or click on the tiny plus icon to add it.

  • How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

    I have a full screen and cannot see my bookmarks.
    How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

    View > Sidebar > Bookmarks (Ctrl+B)
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

  • How can I get rid of the display of the last played music-title

    How can I get rid of the display of the last played music-title
    When playing a music-title the name of the title and it's progress is displayed in the box at the top of iTunes, even if the music is already stopped or ended. This display is impeding f.i. when copying music-albums to iPhones and watching the progress. Can anyone tell me please how to make the display of the last played music-title disappear?
    Thank you very much in advance.
    Hans M

    OK, thank you very much, fiend.
    However: Since yesterday afternoon my e-mail-acount is being flooded with 50+ e-mails every few hours which are not at all related to my question. I'm copying the properties of one e-mail as a sample. Could you please organize this flood to stop or tell me what to do?
    Thank you very much!
    Hans M
    Return-Path: <[email protected]>
    Delivered-To: [email protected]
    Received: (qmail 11232 invoked from network); 2 Jan 2014 21:38:42 -0000
    Received: from unknown ([172.18.1.109])
              by mailbox11.aon.at (qmail-ldap-1.03) with QMQP; 2 Jan 2014 21:38:42 -0000
    Delivered-To: CLUSTERHOST smarthub76.res.a1.net [email protected]
    Received: (qmail 9065 invoked from network); 2 Jan 2014 21:38:41 -0000
    X-Spam-Checker-Version: SpamAssassin 3.2.0 (2007-05-01) on
    WARSBL504.highway.telekom.at
    X-Spam-Level:
    Received: from redstreak.apple.com (HELO bz.apple.com) ([17.151.62.54])
              (envelope-sender <[email protected]>)
              by smarthub76.res.a1.net (qmail-ldap-1.03) with RC4-MD5 encrypted SMTP
              for <[email protected]>; 2 Jan 2014 21:38:41 -0000
    X-A1Mail-Track-Id: 1388698720:8973:smarthub76:17.151.62.54:1
    Received: from nwk-jivep-lapp04.corp.apple.com ([17.34.26.3])
    by bz.apple.com (Oracle Communications Messaging Server 7u4-23.01(7.0.4.23.0)
    64bit (built Aug 10 2011)) with ESMTP id <[email protected]> for
    [email protected]; Thu, 02 Jan 2014 13:38:40 -0800 (PST)
    Date: Thu, 02 Jan 2014 13:38:39 -0800
    From: Apple Support Communities Updates <[email protected]>
    Reply-to: discussions-replies <[email protected]>
    To: Hans M <[email protected]>
    In-reply-to:
    <2-24330225-3-6714313-1388532858380-2-24354104-3-1039882-1388697859204.jivesbs.ji vemailuser@https://discussions.apple.com/>
    References:
    <2-24330225-3-6714313-1388532858380.jivesbs.jivemailuser@https://discussions.appl e.com/>
    <2-24330225-3-6714313-1388532858380-2-24353958-3-6714313-1388696827692.jivesbs.ji vemailuser@https://discussions.apple.com/>
    <2-24330225-3-6714313-1388532858380-2-24354104-3-1039882-1388697859204.jivesbs.ji vemailuser@https://discussions.apple.com/>
    Subject: [iTunes for Windows] - Re: Cannot follow these instructions
    "Where are my iTunes files located?" [7h40p2-20wvf-ehzw3]
    MIME-version: 1.0
    Content-type: multipart/mixed;
    boundary="----=_Part_577492_1482299802.1388698719437"
    Auto-submitted: yes
    Content-disposition: inline

Maybe you are looking for

  • I to buy iPad Air , can i use Microsoft Office on it ?

    Hi, i am considering to buy the new iPad Air , although it all for my work purpose , i wanted to know can i use the Microsoft Office the same way i use on my Macbook ?  please help me with the suggestions .

  • Access Web Dynpro application on different WAS ??????????

    Hi All, Current Scenario - We have deployed ESS & MSS Business package on one WAS and the iviews are present on another WAS.We have created a Dedicated R/3 system which is pointing to the WAS where these packages are deployed. All these things are wo

  • Playing videos from the iphone to a tv or monitor?

    Can I purchase a cable or connector that will allow me to not only listen but view a video from the iphone to my tv or computer monitor? Where do I purchase such a cable? Thanks

  • Uninstallation SQL server 2014

    I installed sql server 2014, but after six months this version has expired and logically it should be a registred and not a trial version.  I decided to uninstall and reinstall, but some services could not be installed as the engine of the database,

  • Can't add contact by double click when forwarding mail

    After installing Maverick on my imac I can no longer double click contacts to forward email, I have to clck the to button every time. Does any one know how to change it back.