How do I get PremierePro CS6 to talk with Blackmagic card for HDMI output?

I recently upgraded my MacPro from CS5 to CS6.  I primarily work with Premiere Pro but also with PhotoShop and Sound Booth.  Previousely, my HDMI monitor worked with CS5 but the playback settings in CS6 only had the Adobe Default Player as an option and it would not show the Blackmagic card as an option.  I upgraded my Blackmagic software to the most recent version (9.7) but that didn't work either.  After the Blackmagic upgrade the HDMI signal in the CS5 PremierePro version (still installed and in use) ceased to operate. Subsequently, the MacOS was also upgraded from 10.7.5 to 10.8.3 but no change in outcome.  I have checked all mechanical connections.
My platform specs are:
MacPro (Early 2009)
OS 10.8.3
Processor:  2x2.66 GHz Quad-core Intel Xeon
Memory:  12 BG, 1066 MHz DDR3
Dual screen Apple display
Blackmagic output settings (9.7) :  All Video, 4 Analog Audio & 2AES/EBU  (NTSC)
My question is how do I get PremierePro to talk with the Blackmagic card?
Phil

Hi Phil,
What Blackmagic card do you have?
There is a known bug with the Intensity cards and Blackmagic driver 9.7 where it does not output HD, only SD   This should be resolved soon.
In the meantime, if you have a Intensity card you can go back to desktop version 9.6.8.
Best,
Peter Garaway
Adobe
Premiere Pro

Similar Messages

  • How do I get my iPod to talk with my iMac using FaceTime?

    I know it's going to be something annoyingly obvious, BUT, how do I get my iPod to talk with my iMac using FaceTime? Both appear to work just fine with other emails, have made calls out to others using email addresses with both the iPod and the iMac. Have recieved calls from others on both iPod and iMac using phone numbers and email addresses. Just can't call my self as it were. Both the iPod and the iMac use the same email address, is this my problem? How do I get it work? (it's for my daughter so she can talk and see her mother when she under goes cancer treatment).

    Yes, having the same FT calling email address is the problem. It like trying to make a phone call to your your phone from your phone.
    On one device add another email address for FT and then uncheck or delete the Apple ID email address the Apple ID call email adddress on the device.
    On the iPod go to SettingsFaceTime>You can be Reached At

  • I have a creative cloud membership including premier pro cc- how do I get Encore cs6?

    I have a creative cloud membership including premier pro cc - how do I get Encore cs6?

    Encore CS6 not installed with Creative Cloud
    Mylenium

  • Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

    kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
    (To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    4:24 PM Sunday; December 7, 2008

    kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
    (To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:19 PM Friday; December 12, 2008

  • Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
    Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
    See bottom section on AIM 6.5 and 6.8 on XP and Vista.
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or receiving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
    A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
    An AIM , @mac.com or MobileMe (@me.com) account name.
    (hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
    Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
    Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
    An AIM account/screen name (AOL or Netscape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
    Between both of you.
    At least one camera (Mac end works better)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
    Summary
    PC end gets AIM 5.9 or Trillian Pro.
    The PC end allows the app through the XP Firewall.
    AIM 5.9 needs "Tuning" to Camera and Mic.
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
    And Also here
    My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
    <hr>
    AIM 6.5 and 6.8 On Vista and XP
    AIM 5.9 or earlier can not be installed on Vista.
    AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
    AIM have an FAQ page about this
    Below the pics is this quote
    What do I need to use Real-Time IM?
    You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
    See items 5 through 13 on this page for alternatives including Web Browser based ones.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    This is the one I have been wating for
    http://discussions.apple.com/thread.jspa?threadID=406152
    kichat: Look and sound great in iChat!
    Ian's First FAQ
    Also New Today
    http://discussions.apple.com/thread.jspa?threadID=121775
    kichat: FAQ 2 - How to get my router to work with iChat?
    And
    http://discussions.apple.com/thread.jspa?threadID=121665
    kichat: FAQ 1 - What do I need to start in iChat ?
    11:20 PM Thursday; March 16, 2006

  • HT3310 how do i get my headphone to work with the iphone?

    how do i get my headphone to work with the iphone? Are there some settings
    that I need to turn on so I can use my headphone while talking on the phone?

    Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack. 

  • How do I get Video and Audio Chats with PCs ?:  FAQ 3

    How do I get Video and Audio Chats with PCs ? (Updated 24/11/05) iChat FAQ 3
    Applies to iChat 3.x and iChat 2.x
    This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
    Glossary For This FAQ
    This bit is designed for clarity.
    Video is the sending and /or recieving of pictures and sound.
    Audio is the sending and or receiving of sound only.
    One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
    What is needed
    At the Mac end
    1 Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3
    A DSL (Broadband) connection of at least an up link speed of 256kbs.
    An AIM or .Mac.com account name.
    (hosting Multiple person AV chats requires higher specs and broadband uplink speed).
    At the PC end
    1 PC running windows XP (home or Pro). THIS A MUST
    The AIM Standalone Application, currently at ver. 5.9 at this link.
    Note: there is also Trillian Which has a Pro version for $25 that can also Video and Audio chat. The Basic just Texts and Audio Chats (AIM does not Audio chat)
    Some need the file from item 2 Here
    Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
    An AIM account/screen name (AOL or Nescape count as well)
    Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall.
    Between both of you.
    At least one camera (Mac end)
    A sound input device (the camera, if it has one is ok)
    Your Buddies screen/account name in each others Buddy Lists
    Other tweaks
    For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning)
    This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then, Options
    To Start
    You should now be able to chat to each other.
    If each of you has a camera it can be full Video , as described in the Glossary at the top.
    To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
    To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
    If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound returned to you.
    To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
    To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
    It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
    Summary
    For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
    NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
    Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
    Another explanation of the set up can be found Here
    My Web Pages
    Happy Chatting.
    Ralph

    Hi Ralph,
    Just a type, you misspelled Netscape...
    An AIM account/screen name (AOL or Nescape count as well)

  • HOW can I get a GOOD copy of the iTunes software for my desktop?

    I solved MY corrupt firmware file problem!
    A little background- I deleted all Apple, iPod, and QuickTime software from my desktop PC and reloaded iTunes for the (I don't know how many) time. Same thing! Downloaded it again and used the "erase iTunes" option then reloaded again and had the same result. I then cranked up my old laptop and when I got to the Apple website, I was offered an opportunity to download QuickTime and took it. It came with iTunes if I wanted, so I took that too. After the download, I plugged in the Nano and it restored to Windows format. I did not want it to sync to the laptop, so I took it to the desktop and was able to sync with Nano and downloaded my tunes. TALK ABOUT HOKEY!
    WHY does the restore program have to be resident on MY PC or MAC anyway? Seems like I could just as simply download a current copy from Apple every time I want to restore.
    WHY doesn't Apple do something about this problem and let users know about the solution? Do they not want to grab a share of the Windows business? Here is an excellent opportunity!
    Now for my question.
    HOW can I get a GOOD copy of the iTunes software for my desktop? I now know it works! Is there a hidden file or folder I should delete before I make my next attempt to cleanup and download? Why isn't this information public?
    I spent over 30 years in the DP industry. PC is not my area of expertise, but this must be the most frustrating experience of my years.
    desktop   Windows XP  

    I THINK I have solved the problem. Can't be 100% because I don't want to try a restore. At least the Apple home page lites up correctly with quicktime now. It hadn't in the past.
    Thank you for your assistance. - LRB
    desktop   Windows XP  

  • How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • How can I get elements 11 to work with 16 bits photos?

    In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

    No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
    Either way is expensive compared to photoshop elements.
    http://www.adobe.com/products/cs6.html?promoid=JOLIS

  • TS1702 Cannot get iPhone 4 to talk with Mac Lion using Numpad. Have updated, restarted etc. Have Screen Sharing on. It sees my computer but when I press keys on the NumPad there is no response. I have tried it on the Calculator and on Sibelius. Any clues?

    Cannot get iPhone 4 to talk with Mac Lion using Numpad. Have updated, restarted etc. Have Screen Sharing on. It sees my computer but when I press keys on the NumPad there is no response. I have tried it on the Calculator and on Sibelius. Any clues??

    Here's how to do it.
    1. App Store, iTunes Store should have the same AppleID on Computer and iPhones. (Free to share apps, music and books... )
    2. Person A uses the same purchasing account for everything (ie. email, contacts and ...).
    3. Person B have the same purchase account see no. 1 (for App Store and iTunes Store) but create a second AppleID for iCal, e-mail, contacts  and etc.

  • How can I get a new copy of the Voicemail app for my LG Spectrum?

    How can I get a new copy of the Voicemail app for my LG Spectrum?  It no longer works....the screen say Loading please wait....the
    !Visual Voice Mail - A Visual Voice Mail error has occurred.  Please try again. OK   I've tryed several times with the same message.  I've
    deleted the app from my screen and replaced it from the Apps Library....still the same message.
    I cannot find an answer on MyVerizon.  Any ideas?
    Thank you,
    Dee

    OK, at least 3 is working.
    I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
    Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
    Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
    You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
    If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

  • How can we get Dynamic columns and data with RTF Templates in BI Publisher

    How can we get Dynamic columns and data with RTf Templates.
    My requirement is :
    create table xxinv_item_pei_taginfo(item_id number,
    Organization_id number,
    item varchar2(4000),
    record_type varchar2(4000),
    record_value CLOB,
    State varchar2(4000));
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
    select * from xxinv_item_pei_taginfo;
    Item id Org Id Item Record_type Record_value State
    493991     224     1265-D30     USES     fever     TX
    493991     224     1265-D30     HOW TO USE     one tablet daily     TX
    493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
    493991     224     1265-D30     DRUG INTERACTION     ABC     TX
    493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
    493991     224     1265-D30     NOTES     Take after meal     TX
    Above is my data
    I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
    In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
    its a BI Publisher report.
    please suggest

    if you have data in db then you can create xml with needed structure
    and so you can create bip report
    do you have errors or .... ?

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting

    I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting

    See KB Article:  How to use your iPod to move your music to a new computer

Maybe you are looking for