How do I get printer code?How do I get rid of the Wireless button blinking?

1. Product Name and Number
hp photosmart printer c410a
2. Operating System installed (if applicable)
windows xp
3. Error message (if any)
blinking wireless button
4. Any changes made to your system before the issue occurred
During reistall, even though USB connection was selected, I responded later positively to a wireless option which prompted me for a printer code which I don't have.
Now that the installation is complete, how do I get a printer code? Barring that, how do I get rid of the blinking?
Is the blinking due tothe printer code or just that wireless is operational?

OK, you can probably not connect to a neighbor's network unless you know their wireles password. You do not want to do that because THEY can print to you your printer!
Try pushing on the light or next to the light.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

How do I get printer code?

HP DESKJET 3070A printer B611a How can i get printer code?

Hi there yan_be,
This link has eprint setup and the printer code is under the setting up eprint heading:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728147&tmp_task=useCategory&cc=us&dlc=en&lang...
mary1perez:
Your's is located here under the setting up eprint heading:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02652473&tmp_task=useCategory&cc=us&dlc=en&lang...
Let us know if it works and Best of Luck to you both!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

TO layout - how can i adopt (print code in LT31)

Hello,
can you little explain me how can i adopt print code in LT31 to new print code and change it? I need only add source storage unit.
Thanks

OMLV - Print Code.
What do you want to do? Change the layout or create a new print code with a new layout?
Regards,
André Costa

I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help :(

I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help

If you're syncing with a different iTunes library than the one you previously synced with, then there is no way around it. You're gonna loose the old data. The only way round it would be to make sure that all the music files on your iPhone is also in your iTunes library. If you still have access to the computer with the old library, you could copy the files on to an external harddrive, and then import them into your new iTunes library.
If it is in fact the same library, then the music currently on your iphone, is also in your itunes library. Just make sure that the artists/albums/playlists, or whatever you sync contains these tracks, that you allready have on your phone and don't want deleted. What i do is, i create a playlist specifically for my iPhone, and i set it up to only sync with this playlist. Whenever i hear a track from my iTunes library or buy a new track that i want on my phone, i just drag it to this playlist and next time i synchronize, it's there without deleting anything else.

How do I get rid of the "Downloads" button on my bookmarks toolbar? Somehow it just appeared and I can't get rid of it.

How do I get rid of the "Downloads" button on my bookmarks toolbar? Somehow it just appeared and I can't get rid of it.

Firefox 20 changed from the old Download Manager to a new Download Panel. You can find a complete write-up here: [[Find and manage downloaded files]].
I suggest keeping that arrow around since it provides handy notifications. You can use the Customize feature to drag it down to the add-on bar where it won't take up as much space. To start customizing:
* right-click a blank area of the tab bar > Customize
* tap the Alt key > View menu > Toolbars > Customize
If you really don't need it, just drag it to the Customize dialog. You can always come back for it later if you like.

How To Generate And Print Reports In PDF Format From EBS With The UTF8 Char

Hi,
I want to know How To Generate And Print Reports In PDF Format From EBS With The UTF8 Character Set in R12.0.4.
Regards

Refer to Note: 239196.1 - PASTA 3.0 Release Information
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=239196.1
Or, you can use XML Publisher.
Note: 551591.1 - Need Latest XML Publisher / BI Publisher Patches For R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=551591.1

TS3297 How do I resolve error code 8003 when I try to empty the trash?

How do I resolve error code 8003 when I try to empty the trash?

Try this Discussion from the More Like This section...
https://discussions.apple.com/message/18549254#18549254

HT1212 how do i rest pass code on an ipad if i forgot the pass code?

How do I rest pass code on an ipad if I forgot the pass code?

I hope you have updated your iPad! If not you will lose everything. You will need to a full restore as Johnathan said. http://support.apple.com/kb/ht1212
If you have backed it up follow the process on the link provided and then restore it with this link http://support.apple.com/kb/ht1414
Good Luck!
joe1828

HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

My iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button

my iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button,

Hello arlyn-cavite,
If the screen is not showing anyting when you press any of the buttons you may want to try these steps.
From article iPhone: Hardware troubleshooting http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Take care,
Sterling

How do i create a pdf file? I no longer have the pdf button.

how do i create a pdf file? I no longer have the pdf button.

Are you referring to the CreatePDF online service?

Can I get rid of the TOC button on the playbar?

My project is set up to have a TOC and for most of my project I use a TOC button with widget to open the TOC. I am also using the Playback control Pearl for a portion of my project. When in this section where the playback control is active if I choose the TOC button to skip to a portion of the project it keeps the playback control and TOC open even though those slides initially are set to not show the playback control or TOC unless a button is clicked.
Any help on how to get rid of the TOC button on the playback control or to automatically hide this after you jump to a different part of the project?
I am using Captivate 5.5 and Windows 7.

Hi again!
>> i was always of the idea that FOR BROWSE was to
>> include the Yellow arrows !!!
i was too
now we all now that FOR BROWSE is move effective "bug-feature"

I have multiple questions did they get rid of the blovk button

i have multiple questions diid they get rid of the block button!?

and als my iphone wont let me delete all my texts off the texting ap so i wont be able to down load the new down load what can i do? and also if they took off the blocked feature how do i unblock ppl

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

Can't get MAC to shut down and start up via the schedule button in system preferences energy saver. Is there another way?

Can't get MAC to shut down and start up via the schedule button in system preferences energy saver. Is there another way?

Try this to start:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

How do I get printer code?How do I get rid of the Wireless button blinking?

Similar Messages

Maybe you are looking for