How do I get Pro Tools MP9 to work with Mt. Lion 10.8.2?

I have Pro Tools MP9 installed on my IMac 27" and just today I upgraded my system software from 10.6.8 to Mountain Lion 10.8.2. Now my Pro Tools has all kinds of problems. The system software doesn't recognize the M-Powered USB audio interface or any other hardware hooked up to my Pro Tools! Safari runs real slow and had I had any idea this was going to happen, I'd have not upgraded anything as everything was working so well before. Anyone else out there have this same problem or is there anyone that can help me solve this dilema?

You might get more relevant help by contacting Pro Tools tech support. It may be as simple as an update to bring compatibility for the latest version of OS X, or some other procedure, but they would have the best info on this.

Similar Messages

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • How to i get an itrack solo to work with pro audio x?

    how to i get an itrack solo to work with pro audio x?

    Long shot perhaps, but...
    how about...
    following  instructions in  manuals?
    http://help.apple.com/logicpro/mac/10/#lgcpebe92ce0

  • Pro Tools 10 not working with 10.7.5 HELP!

    My reading suggests that Pro Tools 10 will work with 10.7.4 . My mid 2012 macbook pro came with 10.7.5 and it looks like trying to roll back to 10.7.4 will crate other issues with Safari, iphoto, etc. I tried to install the late 2012 10.7.5 update which fixes some programs not launching, but I get an error mesage saying that my harddrive does not meet the requirements. Huh? It's a 750 g standard isue partitioned to use boot camp as well.
    I'm desperate. I need my recording studio to work!! HELP!

    That is because your Mac came with a special build of Lion made just for the newest models, it contains the correct driver set for the newer hardware in the new models. You may have to do a complete reinstall over the top of your current install from the Online Internet Recovery system, IE Not the Recovery HD partition on the internal drive, to get the correct 10.7.5 build for your model.
    As to Pro Tools 10 working on Lion 10.7.5 you would need to contact Pro Tools and ask them.

  • How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.

    How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.

    After hours restoring phone and resetting all my accounts and settings the Bluetooth is back on. Not sure how long this will last. In regards to AirPlay taking over, I had to drive far enough from our wifi signal to allow the Bluetooth to take back the audio. Its working for now.

  • How do I get my Jawbone Era to work with my Ipad 2

    How do I get my Jawbone Era to work with my Ipad 2?  The Ipad shows the Jawbone as synced, however, when I play a video it does not play through the Jawbone, only the Ipad speaker.

    You need to pair the iPad with the bluetooth keyboard. I don't understand how you could have used it even once without doing this process (unless whoever sold the iPad and keyboard to you did this for you?) but perhaps it has somehow become unpaired. There should be instructions with the bluetooth keyboard on how to pair it with an iOS device like your iPad, but the general process is pretty straightforward as described here:
    iOS: Third-party Bluetooth accessories
    If you can't find the pairing instructions/user guide that came with the keyboard then look on the manufacturer's website, they'll almost certainly have downloadable User Guides containing the info on pairing.

  • How do i get my ipad 2 to work with another micro sim

    how do i get my ipad 2 to work with another micro sim

    Follow the instructions here >  iOS: Syncing with iTunes

  • Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation

    The Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation.
    Opening the dictation system preference panel makes the system preferences crash...
    The mic of that camera is the only mic I have.
    I own a Mac Pro and an old Cinema Display which has no built-in cam/mic.
    Anyone having the same issue?
    I hope this is gonna be fixed with 10.8.1.

    Hello, thank you for responding.
    Unplug and plug in back the camera does not solve this problem. I tried that before.
    But what worked was to start photo booth. Don't really know why.
    So after every restart of the mac I have to start photo booth and dictation with the QuickCam is working. ^^

  • How can I get my Canon A620 to work with Windows 7

    Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ? 
    I'll keep looking around. 
    Steve

    If you need photo software and don't have any you can download Canon software here.
    http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
    But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
    If  you decide to connect the camera via USB you don't need a driver; its built into W7.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How do I get the new iPod to work with iTunes

    I recently purchased a new iPod--I think it's the "Shuffle," whichever one retails for $150. When I plugged it into my iMac, it said I needed to install iTunes 10 to run it. When I checked for updates, it said that iTunes 9.xyz (whatever came after the 9) was the latest version.
    How do I get this new iPod to work. As you can tell, I am not much of a gadget junkie, and I'm a bit of a technology incompetent, which is why I purchased the Mac to begin with. I have an iMac, have no idea what operating system I am using--whatever came with it when I purchased it in November, 2008.
    TIA!

    Okay, I just looked and I do have 10.411. How do I upgrade to get the new iPod to work, and how much does the new operating system cost?

  • How do I get my i phone to work with my security camera  while on vacation, I have a wansview NCB547W

    I cannot seem to get my WANSVIEW NCB541W to work with my I phone.

    Hello JaeRoc48,
    I understand that the sound is not working.
    Go to start.
    Type Sound.
    Select sound.
    Select speakers as default.
    Click OK.
    Let me know how everything goes.

  • How can I get my metronome click to work with 12/8 meter in Logic?

    I'm trying to get my KlopGeist click to 12/8 music.
    I can get it work with 4/4 and click on divisions set to 12th, but I cannot get truely 12/8.
    It's ok to recore, but the notation is different.
    Can anyone give me an answer?
    Thank you.

    You can try some workaround like this...
    Create an Arrange track for the Klopfgeist (instrument 256). Create a new (one bar) region and draw 4 dotted notes using pitch say G5. Select the region and set ins "Loop" parameter to ON in the track inspector. Done.
    When you need Click you can Mute/Unmute the Klopfgeist track instead of tweaking the Click button in the Transport.
    Another scenario can be done using the Environment click object and building a small Environment tool which can work with the Logic transport click etc.
    A.G
    www.audiogrocery.com
    Author of: Logic GUI Deluxe (Free),
    Vox De Bulgaria - s.a.g.e vocal pack for RMX,
    Logic Snapshot Console,
    RMX Power CTRL - Logic Environment Midi editor for Stylus etc.

  • How do I get Photoshop CS2 to resume working with Lion upgrade?

    How do I get Photoshop CS2 to resume working now that I have installed Lion upgrade?
    Can I uninstall Lion and get back to a working system?

    RoaringApps Mac OS X Lion Application Compatibility
    Lion App Compatibility Table - RoaringApps
    Using Cloning as a Backup Strategy
    Clone X 4.0
    Carbon Copy Cloner 3.4.1
    How to prepare your Mac for OS X 10.7 Lion
    Upgrading to Mac OS X Lion Protocol

  • How can we get the web cam to work with sykpe or any out going calls

    can get the web cam to work with skype

    Hey there,
    What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I took Lion off my Macbook Pro and put Snow Leopard back on and now I can't access Mail or iPhoto. How do I get Mail and iPhoto to work with the Snow Leopard I just put back on?

    Hi. I was having slowness problems with my Macbook Pro and thought I would re-install Lion but put Snow Leopard back on by mistake. I bought the computer used with Lion on it and don't have access to the USB drive or a username/password to reinstall Lion. Now I can't access Mail or iPhoto since I put Snow Leopard on.
    Is there a way to get my Mail and iPhoto working again with Snow Leopard or do I have to "re-upgrade" to Lion?
    Thanks!
    Steve

    You can't. When you converted those libraries to Lion's format, you lost the ability to go backwards. Unless you saved a bootable backup./clone or Time Machine backup of your previous SL installation, you're up the proverbial creek w/o a paddle.

Maybe you are looking for

  • Hi, I lost my ipod one day ago, and I had all my pictures saved on my icloud. Is it possible for me to rescue them? If so, how? Regards

    Hi, I lost my ipod one day ago, and I had all my pictures saved on my icloud. Is it possible for me to rescue them? If so, how? Regards

  • Deleting 20 000 records

    Hi I have to get deleted 20 000 of unwanted records in one of my oracle database. As i monitored , when i going to delete a single record it takes around 2 mins time and also it's gonna be a impact for performance as well since its increasing CPU usa

  • ODI tool Start Scenario

    Hi guys! In my package I've used an ODI Tool OdiStartScen with variable which corresponds to the Interface scenario name (#SCENARIO_NAME). My Interface is dynamic. Its source is flat file datastore with resource name based on a variable #FILE_NAME. N

  • Illustrator CS4 does not save an action set

    In Illustrator CS4, english, under Windows XP SP3, english, I created a new action set and wrote some actions. It works. Later, I selected in the Actions menu the command Save Atctions... It opened a system' Save window, let me choose a folder and pr

  • Dictionary: no entries found, why ?!

    I have the icon, but when I enter the .app and type in a word (any word) I gt "no entries found."  The only one that works is after I click Wikipedia. Why is that? How can I download whatever files I am missing?  And no, I do not have an installation