How do I get Quicktime Pro for Windows to save audio files?

No matter what I do QTP for Windows only saves .mov files. I am trying to create a new audio recording but the only file type I can save is movies. I bought this product specifically to try and migrate old cassette music to itunes. Any clues as to how I should go about it?

Have you tried Audio Capture software? This is dead easy on a Mac, plug it in and use something like SoundFlower (free) or Audio Hijack Pro to grab the sound.
If you have registered QT Pro you should get:
Menu > File > Export (Options): a wide range of formats
May I ask why you are doing this? Unless the tape version is unique, you should avoid recording from old tape as it is the worst of all worlds. The quality is bad and changing it to digital is not going to make it better even with a lot of editing.
Just bite the bullet and get CDs (which you can easily save to digital from iTunes) or buy the digital version directly. That way is much less painful and you have something you may actually want to listen to.
Peter

Similar Messages

  • Quicktime Pro for Windows crashes after flattening file

    I'm running QuickTime Pro 7.7.1 for Windows.  A few weeks ago, I opened an M4V file, cut out some segments, and invoked "Save As" a quicktime .MOV file.  Given the option to save as a "reference" movie or a "self contained" movie, I chose "reference" movie.  Said "reference" movie plays exactly as I intended, as long as the original M4V file is present.  Today I wanted to eliminate that requirement, so I opened the reference movie and saved it again to a new .MOV file, this time choosing the "self contained" option.  A "flattening movie" dialog appeared, and when it got to 100%, Quicktime crashed!
    I tried the same experiment, one running Windows XP Pro and one running Windows 7 Pro, and got the same result each time.  What can I do now?

    I haven't [yet] tried it with other M4V files, but I will and get back to you.
    BTW, after it crashed, I restarted QuickTime and opened the newly-created "self contained" movie and it seemed to play OK,  So despite the inconvenience of having to restart, the crash didn't seem to affect the end product of my work.

  • How to transfer Quicktime Pro for windows to mac?

    My step-father recently purchased quicktime pro for windows. Oddly enough he received his new iMac about a week later. While trying to activate Quicktime Pro on his mac he realized that pro purchased for windows will only work on windows. Is there anyway to transfer the purchase to mac?

    Sorry, you (he) have to buy a separate license for QT Pro for Mac.

  • How do I get a program for windows to open without putting windows on my computer

    How do I get a program for windows to open and setup on my Macbook Pro without purchasing windows?

    Try running it through CrossOver Mac or WineSkin.
    (82008)

  • How can I get quicktime pro 7 running

    I bought quicktime pro 7 a couple of years ago and have a registration code.  At the time I used the program to make some time lapse movies.  I'd like to make a couple of time lapse movies again but quicktime pro 7 is no where to be found.  This probably ha something to do with updating the os between then and now.  The question is how can I get quicktime pro 7 running again?  The unlocking instructions I have for quicktime pro 7 that I received with the key do not correspond with what the system preferences now show.  Any assistance would be appreciated.  I am currently running OS X version 10.9.5 on an older iMac.

    Open the QuickTime 7 player(if it’s not installed, click here), choose Registration from the QuickTime Player 7 menu, and supply your key there.
    (115130)

  • Can Quicktime pro for Window Put my DVD right onto my ipod video?

    I was wondering if Quicktime pro for windows was able to put my DVD right on to my ipod?

    No, it cannot.

  • Quicktime Pro for Windows

    I bought Quicktime Pro for windows because of the beautiful advertisement. It had to be possible to convert every video into every format possible.
    I tried to convert several mpg en mov files (from Sony camera) into mp4 and 3GP. Playing of these mpg and mov- files in QT is not a problem, even with audio. So it doesn't seem a codec problem. But after exporting these files into other format, there is no audio anymore.
    If I change a mov or mpg file and save it in the same file-format, audio is not corrupted.
    What is it that I do wrong?
    Dell Inspiron 9300   Windows XP  

    QT does not export sound from muxed mpeg files: QT Mpeg Limitations. This freeware should do the trick: Mpeg StreamClip
    If the mpegs in question are mpeg-2 you will need to buy the mpeg2playbackcomponent from Apple ($20 US). Note that these programs will not work with encrypted Hollywood movies.

  • I  just bought Quicktime Pro for Windows. I want to enter my registration code and get started....but where do I do that? No option in my Quicktime menu.

    I just bought Quick time Pro for Windows. I want to get started, but can't find where I can enter my registration code!

    Edit menu / Preferences / Registration

  • QuickTime Pro for Windows playback issue

    Hi,
    I'm using QT Pro for Windows for time lapse. Most times during playback the video stops halfway (or thereabouts) and then after a few seconds, jumps to the end.
    Any help would be appreciated.
    Thanks.

    HP HPE-110t, Intel(R) Core(TM)2 Quad CPU 2.5GHz, 64bit, 6GB
    Windows 7 Pro
    These are a series of JPEG (5184 x 3465) taken with a Canon T31 and opened with the QT Pro "Open Image Sequence" stored on my C: drive
    I get the same result no matter how many frames I load. The playback does not always stop halfway, seems random. I have also noticed that if I play it back multiple times (10-12) the playback does get smoother.
    Thanks.

  • Quicktime Pro for Windows Tutor

    Can anyone steer me to a site that has some basic instructions on how to use the various fuctions of QT Pro (for Windows). I'll spent several hours today googling for this type of info and haven't found too much. I know this is a forum for prople having specific problems with QTP, and I have read dozens of pages here but I would still like a good primer on how best to use the various fuctions. My primary interest at the present is making home movies (.mov) and editing them with QTP and Windows Movie Maker.
    Thanks

    QuickTime for windows error -2048 has been consistant for many moons. With not opening file formats that are not supported. Unlikely caused by a battery or camera...

  • QuickTime Pro for Windows cuts off after about a second?

    Pro version of QuictTime worked fine at first on Vista 32bit. (Don't judge me becasue I'm using Vista, please!) Used it for video editing last fall. Now I find any video or audio file I try to play cuts off at about 1 minute. Only way to get it to play an entire movie is to turn on "Play All Frames" or else mess with playback speed -- and in both cases audio gets turned off. I have tried resetting just about every preference and view setting I can find. Uninstalled and reinstalled. Was especially careful to make sure I did not have playbe restricted by means of "Play Selection Only." Furthermore, teh start-stop bracketting controls have no effect.
    This happens with all kind of video and audio tracks.
    I am at a total loss. Searched Windows Registry for something amiss but found nothing. Even being a software developer myself I just don't see what is amiss. Could this be due to some nasty codec? Conflict with other software? Only new media software on this machine I know of is Adobe's and I never even use that.
    Help?

    I haven't [yet] tried it with other M4V files, but I will and get back to you.
    BTW, after it crashed, I restarted QuickTime and opened the newly-created "self contained" movie and it seemed to play OK,  So despite the inconvenience of having to restart, the crash didn't seem to affect the end product of my work.

  • How do I get a license for Window Embedded CE 6.0 Platform Builder?

    I downloaded the Windows Embedded CE 6.0 Platform Builder for Visual Studio 2005, but the trial license is no longer available. How do I go about getting a license for this product? How much is it?

    We purchase our platform builder and run time licenses from MDS Pacific, they cover the India, South East Asia and Oceania regions.
    The cost is around US$1300 (from what I remember) for platform builder, this includes a copy of Visual Studio (at least it does for WEC2013).
    The cost for the run time license that needs to go with the devices you produce is around US$5 per license, but this very much depends on the quantity you are producing and the OS components that you are using.
    If you are not in any of these regions, there is a company called Bsquare who operate in the US and Europe and other parts of Asia.

  • Is there a 64 bit Quicktime Pro for Windows?

    I just purchased a 64 bit vista machine for video editing and I'm looking for a 64 bit version of quicktime pro. I've installed quicktime on this machine and notice that it runs as a 32 bit process. I want to take full advantage of my hardware, and therefore want a version of QT Pro that is made for the 64 bit architecture. There is no information on apple's website that I could find about this. Does anyone in the community know if apple has made such a version of QT Pro???
    Thanks!

    I believe the libraries for QuickTime (QTKit) are indeed 64 bit. However, 64 bit under OSX is very different from 64 bit under Windows. There are a few good websites that can help explain the difference, here's one that is fairly straightforward.
    http://arstechnica.com/articles/culture/microsoft-learn-from-apple-II.ars/3

  • Text tracks no longer visible in Quicktime Pro for Windows 7.7.2?

    I opened a text track in Quicktime Pro 7.7.2, and none of the text was visible. I verified with a text track that I know used to work a few months ago, and it also was not visible.
    I rolled back to Quicktime Pro 7.6 for Windows, and re-opened the files, and they worked again. Has anyone else encountered this issue? I know the 7.7.2 update involved a security patch to the way text tracks were handled.
    Thanks.

    I love computers.
    Have managed to fix this already. Been working the issue for a few days now, and a few minutes after writing the above post I decided to reset the Time Capsule to factory default settings.
    After entering all my details again (used same network names, passwords etc) the Time Capsule was rebooted. When it came back on line - guess what? Yep, the MyBook WD drive is now visibile. I can connect via the network from my other machines to the drive, and iTunes is back.
    So - thought I would post my resolution in case it helps others.

  • How can i get quicktime pro to work on lion 10.7

    Unless thers a way to open anl imagie sequense im QTX

    Click here, download the software, and apply the QuickTime Pro key to it.
    (60860)

Maybe you are looking for