How do I get Raw files into Organizer?

I have a Nikon D300. I have 15,000 in Organizer and would now like to experiment in RAW, but Organizer will not accept them. Any way around this?
Thank you,
Ian Julian
www.natureandpictures.com

Thank you for that. I have downloaded the ACR (whatever that stands for) and have an icon. What do I do now to get it into Organizer? I remain unable to download my RAW files.
Thank you,
Ian Julian
www.natureandpictures.com

Similar Messages

How do I get video clips into Organizer from Elements?

I have broken my raw video into pieces in elements but can't get it to import into organizer.
I am using Elements 11 Trial.

The video is actually a football highlight film for our son and came to us as a single mp4 file with about 60 plays of video on it.
What I am trying to do is
1) Cut it down into 60 individual videos (which I did and currently have in my project).
2) Save the pieces off as individual video clips.
3) Get the ability to rank/rate each video and select the 25 or so that will make up the final video.
4) Polish/edit those that make the grade.
5) Organize and assemble.
Does this make sense?
t
Date: Mon, 19 Nov 2012 14:44:31 -0700
From: [email protected]
To: [email protected]
Subject: How do I get video clips into Organizer from Elements?
    Re: How do I get video clips into Organizer from Elements?
    created by whsprague in Premiere Elements - View the full discussion
karaannmbb wrote: I have broken my raw video into pieces in elements but can't get it to import into organizer. I am using Elements 11 Trial.Place the "Work Area Bars" (located on the time line) so that only a "piece" is covered. Then "Share" to a computer file. Pick a file type that suits your needs. Be sure to check the box titled "Share WorkArea Bar Only". Unfortunately, the clip piece will be re-encoded. PrE11 will do that well, but not perfect because any encoding always seems to loose a little. You did not say what camera you are using. The software that came with my Sony and Panasonic camcorders is much better for splitting clips into smaller clips. Some sort of magic is in them where re-encoding does not take place. The pieces have the same picture quality as the original.   So, when I do what you want, I break it into pieces with the camcorder software, the put the video together in PrE with all the creative tools it offers. Bill
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4859754#4859754
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4859754#4859754
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4859754#4859754. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I get my file into the time line in Premiere Pro CC?

How do I get my file into the time line in Premiere Pro CC? I am use to Premier Pro CS6 and unfortunately my labtop took a crash and I lost all of my adobe products. I wanted to check out a trial version and I cannot seem to find one for CS6! Please Help Me! My project is due tonight!!!!!

Hi Aneumann,
Welcome to the Forums.
You have to just right click on the clip imported, in the project panel and select new sequence from clip. You can also go to file menu>new>sequence and create a sequence and then drag the clips after importing them , into the timeline.
Regards,
Vinay

Converting .wmv to .mov files or how do i get .wmv files into itunes?help!

i recently got some video but some of it is in .wmv format and i need to know how to convert these to .mov format
or
how do i get .wmv files into iTunes.
plz help

Intervideo sells software that will convert your files into a format that can be read by an Ipod.

How to sent importet RAW files into the cloud? The files was importet from Canon EOS via camera adapter to the iPad. The Files was stored in the folder importet. But the files does not sync with photostream.

How to sent importet RAW files into the cloud? The files was importet from Canon EOS via camera adapter to the iPad. The Files was stored in the folder importet. But the files does not sync with photostream.

Welcome to the Apple community.
Only photos taken on the iOS device and after photo stream was enabled will be added to photo stream.

Elements 12 organiser has changed all raw files to jpeg - how do I get raw files back?

Cannot edit raw files as Elements (12) seems to have changed them all to jpegs - can anyone let me know how to get raw files back?

Hello Jim,
Many thanks for your response. Wondering if we did something in Elements preferences? Usually, when thumbnails are opened in the editor, it’s a raw file to work on. However, all the thumbnails, when opened in the editor, are all of a sudden opening as jpegs …. not raw. o it looks as though all the raw files are now jpegs, and we don’t know how to get them back.
Any help you can offer will be gratefully received, as my husband works on his photos in Elements and it’s driven him mad!
Many thanks & regards.
Kim

How do you convert Raw files into jpeg.

I have never shot in Raw before and I have a huge project due tomorrow. I need help Asap. What is the easiest way to convert Raw files into jpeg, can Light Room convert the files. I have tried so many different ways and nothing seems to work.

michaelfragale wrote:
I have never shot in Raw before and I have a huge project due tomorrow. I need help Asap. What is the easiest way to convert Raw files into jpeg
It depends on the sofware you have. ACR (Adobe Camera Raw) hosted by Bridge or by Photoshop can convert ("open") raw files, as can Lightroom.
However, not all camera models are supported by all versions of the software. We need to know the make and exact model of the camera that generated the raw files to advice you further.
We can also assist you with the conversion through ACR hosted by Photoshop.
Olease note that there are dedicated forums for Lightroom, for Adobe Camera Raw and for Bridge.
Here's the list of which cameras are supported by each version of ACR. Note that later versions supporte all camera models supported in previous versions of ACR.
http://kb2.adobe.com/cps/407/kb407111.html
Note that the latest version of ACR to run in CS4 is ACR 5.3;
CS3 runs ACR 4.6;
CS2 runs ACR 3.7;
CS runs 2.4.

How do i get raw files from my canon7dmark11 into my lightroom5?

i am unable to transfer my raw files from my canon 7Dmark 11,into my lightroom 5,i been able to do this with my other cameras,i.e. 7d and 5d mark11
please advise how to do this

LR 5.7 was new enough to support the 7D Mark II but installing LR 5.7.1 shouldn’t have hurt anything, either. The gray boxes where thumbnails should be on the import grid usually indicate a bad monitor profile but since you’re getting an internal error message perhaps something else is wrong.
What numeric version of operating system are you running on your Mac, like OSX 10.10 or OSX 10.7.5 or what? I am a PC person so can’t tell you exactly how to find this, but perhaps one of the options under the Apple logo, somewhere?
When you purchased LR, did you get the serial-number-licensed version or did you buy the subscription to the Photography Plan which includes both LR and PS for $10/month.

How do you get copied files into a folder of our choice?

OK so this may sound like a very basic question, but it has been driving me nuts ever since I bought an Apple Mac some 3 years ago and I find it hard to believe there isnt a solution.
Objective: to copy or import files into a folder previously created by me within Apples 'Pictures' folder. E.g. "Holiday 2012".
Problem: on every program I have used, inc iPhoto, iMovie, and just now, Preview, when I get ready to copy or import say my photo files from my iphone, or an SD card or a network drive, it never gives me the option to navigate to my folder! How mad is this?! Instead I get teh choice of just Apples plain old Documents or Pictures folders but NEVER get given any opportunity via the dialog box to navigate to my "Holiday 2012" folder. There just is not any obvious way to do it. So instead I get my hundreds of pictures listed directly under Pictures folder, to therefore added to all the other hundreds of pictures listed there. A terrible way to kep pictures.
What I need: someone to tell me how to do this or if its not possible then to tell me that. It is a basic operation that I have been able to do on Windows PC's since they were built. Wht not on Mac? Maybe the solution is right in front of me... if it is then its not intuitive, thats all I can say!
Can you help please?

Hi. Ok.
I have just tried the process again in Preview and in desperation this time clicked on 'Other' in the dialogue box when trying to Import. Low and behold I found the way to navigate to my own folders instead of being forced to use Apples standard Folders called Documents and Pictures.
So problem solved.
Its daft that you cant click on the first folder names listed like you can in Windows so you can then reveal the subfolders. I guess its just another Apple-ism. Too bad it took me three years to find it but then I suppose I gave up early.

How to properly get folders, files into Dreamweaver Defined Site Folder from desktop

I, obviously am a new Dreamweaver user, and I need to know
the proper way of going about getting a folder, files, ect. from my
hard drive into my Dreamweaver defined site folder. I understand
how to insert an image from my hard drive into DW and it shows up
in my site folder in the Files Panel. More specifically, using
Lightbox2, after downloading Lightbox and placing those elements in
a new folder on my hard drive, what is the proper way to get that
folder into my site folder?
Also, how can I properly add images to an images folder in my
site folder in DW for possible later use, without inserting them on
the page. I know by inserting them on the page from a folder on my
hard drive, Dreamweaver prompts me for DW to recognize them. I
would like to know how I can get them in there and DW to recognize
them without actually inserting them on my page.
And can and how can I move files, images, pages from one site
to another? or should I? Thanks, if anyone can help me with these
file moving questions.

To restate courtney's explanation, *anything* that you paste
into the site's
local root folder will appear in DW's File panel, and will be
considered by
DW to be a part of the site.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"courtney (n h c)" <[email protected]>
wrote in message
news:[email protected]...
> assuming you're on Windows, if you want to move files
from one place on
> your hard drive into your site folder, just use Windows
Explorer.
>
> but keep in mind that this would not be the ideal way to
move files within
> the site folder from one place another. for example, say
you have a page
> and you want to move it into a folder, you should do
that in Dreamweaver
> because it will update the links for you in any files
that link to the
> page you're moving.
>
> Rock Artist wrote:
>> I, obviously am a new Dreamweaver user, and I need
to know the proper way
>> of going about getting a folder, files, ect. from my
hard drive into my
>> Dreamweaver defined site folder. I understand how to
insert an image from
>> my hard drive into DW and it shows up in my site
folder in the Files
>> Panel. More specifically, using Lightbox2, after
downloading Lightbox and
>> placing those elements in a new folder on my hard
drive, what is the
>> proper way to get that folder into my site folder?
Also, how can I
>> properly add images to an images folder in my site
folder in DW for
>> possible later use, without inserting them on the
page. I know by
>> inserting them on the page from a folder on my hard
drive, Dreamweaver
>> prompts me for DW to recognize them. I would like to
know how I can get
>> them in there and DW to recognize them without
actually inserting them on
>> my page.
>>
>> And can and how can I move files, images, pages from
one site to
>> another? or should I? Thanks, if anyone can help me
with these file
>> moving questions.
>>

In PSE 9.0, how do I import from files into organizer without duplicating images already in the orga

In PSE 9.0, how do I import images from hard drive files into the organizer without importing duplicated files already in the organizer or
How do I find duplicated images within the organizer so that I can delete them?

I imported a bunch of photos from iPhoto 4 on one machine to iPhoto 5 on another, expecting it to catch duplicates, without testing beforehand (duh). It didn't catch them, and now I'm trying to figure out which were the imported ones so I can delete them.
As this looks to be a laborious task if done from within iPhoto, and deleting the files via the Finder is a no-no -- assuming I can even identify the duplicates -- is there a third-party app, or even a good trick, for doing this?

How can i import raw files into iphoto from my Nikon D300?

Just got a Nikon D300, and it will import jpg and tff, but not raw (nef) files-i prefer iphoto to their software- Nikon says to try talking to apple to find a way to do it- does anyone know any info that can help? I need to decide if I am keeping the camera-from other posts it doesn't look like buying aperture will help either- thanks.

I would not ditch a camera because of this! If you like the camera, there will always be a way to import Canikon RAW files, though you may need to do some upgrading, and it may take some time for Apple to support a new camera.
Message was edited by: Keith Barkley

How do i get .mov files into imovie? using jvc everio - help!

just purchased a jvc everio hard disk camcorder. i thought it would be easy to import the videos into imovie (but i have never used it before). needless to say it won't recognize the format. the formats say .mov & .moi (i think one is video and one is audio? maybe not). is there any way to import these files into imovie version 5??? sorry by the way if this has been answered before. the volume of questions on this forum is staggering. thanks in advance!!!

welcome sneakypablo to the  boards of discussions...
no, iM does NOT support harddisk camcorders (yet), it is meant by concept to work with firewire connected miniDV cameras.. which use "dv" as codec...
.mov is just a container, but I guess, inside is some kind of mpeg...
Apple mpeg2 plugin (29$) + Streamclip (free) allows conversion of mpeg2 into something editable...
final hint: upper right, "search" field .. ;))

How do I get DVD files into FCP for editing?

I have three DVD's that I need to get access to for editing purposes. The DVD's open and play in DVD player with no problem, but how can I import it into FCP? The files in the DVD's folder are "BUP," "IFO," and "VOB" files -- what do I do to get them into a format I can edit?
Thank you so much!

Oh...wait..I forgot.
#7 DVD into FCP
Shane's Stock Answer #7:
To start, I will state that trying to capture any DVD you bought or rented, be it a Hollywood movie or exersize video, is illegal. I will not give you any tips on how to bypass copy protection. It is there for a reason.
To capture footage from a DVD, you have a couple options.
1) Route the DVD player to your DV camera or deck via the RCA cabling. Then you can put the footage you want ontp DV tape and have the benefit of timecode in case the need to recapture comes up.
2) You can get a great application called DVDxDV (Google it). This opens up the DVD and allows you to convert the video to DV/NTSC footage. And it allows you to only convert what you want by allowing you to mark in and out points. The free version puts a big watermark across the center of your footage, but if you pay $25 for the standard version, that goes away.
Or you can use Mac the Ripper or Mpeg Stream clip. These are free.
For this, and other exciting stock answers, click on this link:
Shane Ross, "Stock Answers", 03:58pm Jan 13, 2005 CDT

Sqlload or ctxload: how do I get a file into a LOB?

For some reason sqlload does NOT work the
way it is described in Intermedia guide:
keywords like FILLER or LOBFILE are not
recognized.
Is there a (preferably simple) way of loading
a file ("x.doc", MSWord document) into a
LOB field using ctxload. This far I've done
everything as in the manual, but I get an
error message:
ctxload -user xxxi/yyy@devdb -update -file /tmp/x.doc -pk 1 -name test
NLS_LANG not set - using defaults.
ORA-06550: line 1, column 7:
PLS-00201: identifier 'CTXSYS.CTX_DML' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

Should use sqlloader to do the insert.
Also, error message indicates that there is a package missing from your install.
- Paul
null

How do I get Raw files into Organizer?

Similar Messages

Maybe you are looking for