How do I get rid of 14gb of "other memory"

1,5gb audio
5.0gb apps(120)
docs 0.8
no Photos
6.67 gb free space
and the 14 gb "other" ???? wht is it???
How to get rid of it ????
Have iPhone 5 with iOS 7.02

Thank you,
This is what I did, after your suggestion:
Backup iPhone in iTunes
in iPhone>Settings>General>Reset>Erase all content and Settings
in iTunes> Restore iPhone with previous Backup (point 1)
There is no need to reset the iPhone with iTunes and no need to manually resync apps and content.
You will have your "new" iPhone with all your apps, settings and media just like before
with only a mere 500 mb (0,5gb) of "other" memory.
Thanks again for tip

Similar Messages

How can i get rid of all my "other" space? it takes up 1.47 gb.

My iPod has slowly accumulated 1.47 gb of "other" space. How do I get rid of it?

By restoring the iPod to factory defaults. Other can be made up by things such as album artwork, the iPod's operating system, etc. However, sometimes it can also include corrupt files or data that is no longer recognizable by iTunes or your iPod.
B-rock

How do I get rid of Mackeeper and other random pop-ups?

Yes I am aware that i may downloaded something bad while trying to watch a movie. I have read a lot of comments of how to get rid of them and I some how can't get rid of it. I cleared my extensions, blocked pop-windows, and trashed every file from my finder applications. Any help? Please and thank you! (I have a Macbook Air if that helps)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 -\\t 'PlistBuddy -c Print' );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${p[50]}"'%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n '"${p[50]}"'mod date: %s\n '"${p[50]}"'checksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\/|\.prefP/&&/\/(Lib|usr).+\/(.+\.lproj|Contents|Info\.plist|Resources)|\.framework$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/([A-Za-z_]+\.lproj|Contents|Resources|Versions)(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/\.(component|mdimporter|plugin|qlgenerator|saver|wdgt)$/p;' 's/Pr.+n //p' ' BEGIN{FS=":"};{ if($1~/\.kext$/) { s=system("'"${p[51]}"'\\ :OSBundleRequired "$1"/*/I*|grep -q Sa");if(!s) $1=$1" S";if(!$2) $2="N/A";printf("'"${f[4]}"'",$1,$2); } else print;} ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${p[51]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${p[50]}"'"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(By|m): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls kextfind );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} '-nl -print -print-diagnostics' );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Bad\ kexts );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { Q=5;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo true;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=No;((v['$((i+1))']==0))&&v=;};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};C4() { echo "Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;B0&&{ D13 5 5 69 1;D13 5 54 30 56;C4;D23 5 14 12 14;C4;};D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;C4;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;C4;};D22 12 44 54 45;D22 12 39 15 21;D13 40 58 32 57;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;C4;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;C4;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 0 31;((i))&&{ B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;};C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;C4;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;C4;} 4>&2 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be a series of messages in the Terminal window like this:
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The messages won't be spaced equally apart in time, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the last message you saw. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How do I get rid of myself and other users and just be working from the hard drive?

Hi all,
I know this sounds odd, but bear with me...
I've just bought a new Macbook pro 10.7.4, as my loved old one died. At the store they tranferred all my old info to the new one, but my problem is this: Now I am a user on my computer and there are options for shared users. That sounds confusing, but on my old computer it was just me using it. No sign in or log in, and when I opened my finder window everything was just there in the one bucket (my hard drive): library, apllications, programs, etc. Now I open my finder window and find duplicates of things in all places( i.e. things on my hard drive are also (or not, maddeningly, such as library) there, and then they are also in users or shared.) It is only ever me using my computer, so I don't need all this extra clutter everywhere, or have to go searching for things in different places. Old system was like opening a drawer and finding all your posessions neatly arranged in there, in the one place. Now i feel as though I walk into a room filled with cupboards and things are in some drawers that are also in others, and duplicated.
I apologise for my long rant, but I had to find a way to explain it!
Basically, I want to get rid of other user or shared options on my mac, and myself as a user, and just have the one system staright off the hard drive, no other log ins, but still obviously retain my permissions (password etc) for making changes or installing. Is this possible?

Well, you're going to have two Library folders - one for yourself and one for the System, but you can delete other users and you can enable automatic log-in for yourself using "Users and Groups" in System Preferences. No need to turn on Sharing or have any other users. You'll still need to make yourself an administrator, of course, but if you delete any other users, you delete their home folders, too.
Clinton

How do I get rid of so much 'other' space on my iphone?!

My iPhone keeps telling me it's low on storage, but when I plug it into iTunes it says 5.8GB is taken up by 'other' - I've cut down on apps, music, photos, I don't really want to cut down anymore! What is this 'other' and how do I reclaim the space?!?

Nooooo You Don't Have To Restore!!!!
I know by the date of this thread that I'm probably too late to help you but I had the same problem and just figured out what the "other" really was. It is application archives.
     I'll explain it if you're curious, if not just skip to the next paragraph. When you sync your device and it is trying to update apps it doesn't want to lose the old app while its doing that. So it uploads an "application archive" zip file. Those files normally get deleted once the sync is over, but If that sync gets interupted you have all those zip files there taking up space.
     You don't have to restore your iOS device and lose all your contacts, messages, app data. All you have to do is use a iOS device file browser and delete some old partial apps from incompleted syncs.
     I use "DiskAid" or "iFunBox" but you can use any app that can change the files on your device. I'm going to tell you how to do it using DiskAid.
     First download and install DiskAid
     Once it's installled open it and plug in your device.
     Click on your iPhone/iPod/iPad then on:
          Storage, then
          Media, then
          Application Archives,
     Then just delete all thos zip files! (they will usually have weird name such as "com.NameOfTheCompanyWhoMadeTheApp.NameOfTheApp.zip" (Except it would have the name of the company and the app instead.
     It won't change anything else on your device. It's perfectly safe.
     I hope this helps you as much as it helped me!

How can you get rid of a virus on my ipad

Every time I go on safari or chrome I get a message pop up to state my flash player is out of date.
I know this is a virus of sorts but how do I get rid of the issue

I have 5.43gb of storage on my iphone taken up by other, what is this and how can i get rid of it?

My iPhone is 16gb and i have no music, 500ish photos, and about 10 apps I had to delete everything off it because i couldn't take any photos because i had no space! How do i get rid of the storage other is taking up?

I would probably suggest backing up them photos to your computer and then performing a restore on the phone which will wipe everything off and start again.
Instructions for restore can be found here:
http://support.apple.com/kb/ht1414

How do i get rid of "other" taking up storage space?

"Other takes up almost half of my iphone storage/usage. What is it and how can i get rid of it?

"Other" data is real data that you put on your phone by using the built in apps. It is not music, not videos, not pictures and not App Store app data. It is "OTHER" meaning everything that does not fall into these categories. Such as:
email messages and attachments
Reminders
Calendar entries
Contacts
Text messages
MMS messages and attachments
Genius data
Music cover art
Operating system settings
Safari cache
bookmarks
Game Center status
Music catalog
Probably a few I've missed. There was a problem in an earlier version where deleted MMS messages left behind their attachments, but that has been fixed as of 6.1. However, old images were not deleted from Other; its just that new images were being correctly removed when you delete an MMS message.
You will find posts from people who said they recovered over 3 GB of space by just deleting old text messages.
If you want Other to be smaller you will have to keep less data on your phone; delete old MMS and texts, delete old email (especially from the "deleted" folder), clear the cache, eliminate cover art.
Sometimes "Other" includes data corruption. Normal "Other" is 1-2 GB. If you suspect this is a possibility try connecting to iTunes and click the Restore iPhone button. First restore from backup; the Other doesn't get any smaller you can Restore again and set up as New, then add your content back separately from your backup.

How do i get rid of mac defender

How do i get rid of mac defender

Activity Monitor memory usage
ActivityMonitor.gif
Spotlight perhaps? or /Applications/Utilities - yes
Also by search (Google is often best) of "Apple support"

HT1689 What is Other (5.96gb) on my Iphone storage and how can I get rid of it?

What is Other (5.96gb) on my Iphone storage and how can I get rid of it?

LillynWilson wrote:
What is Other (5.96gb) on my Iphone storage and how can I get rid of it?
"Other" data is real data that you put on your phone by using the built in apps. It is not music, not videos, not pictures and not App Store app data. It is "OTHER" meaning everything that does not fall into these categories. Such as:
email messages and attachments
Reminders
Calendar entries
Contacts
Text messages
MMS messages and attachments
Genius data
Music cover art
Operating system settings
Safari cache
bookmarks
Game Center status
Music catalog
Probably a few I've missed. There was a problem in an earlier version where deleted MMS messages left behind their attachments, but that has been fixed as of 6.1. The reason that deleting music recovers some Other space is because it delete cover art. But is also screws up your music, which will no longer play correctly.
You will find posts from people who said they recovered over 1 GB of space by just deleting old text messages.
If you want Other to be smaller you will have to keep less data on your phone; delete old MMS and texts, delete old email (especially from the "deleted" folder), clear the cache, eliminate cover art.
Your Other is so large, however, that there may be corrupt data contained in it (unless you send a lot of MMS messages with large attachments). If this is the case you should restore the phone as New.

I have 3.5 gigs of "other" what is it and how do i get rid of it?

On my itunes when my iphone is pluged in it says that i have now 3.9 gigs of "other" what is it and how do i get rid of it?

Other is data that does not fit into the rest of the catergories listed on the summary tab. This includes user data and app settings/data.
3.5 GB is a lot... and typically indicates corruption.
You can try a reset of the device and re-syncing, sometime this will clear it up... but typically the resolution is to restore the device from backup first. If that doesn't resolve a restore as new will.
Other should be in the range of 300-800mb.

What is "other" listed on my iPhone 4S and why is it sucking up so much storage space? How can I get rid of it?

How can I get rid of the huge "other" listed on my storage of my iPhone? It's taking up huge gigs. This phone is not even 60 days old!

This worked for me with iPhone 5:
Backup iPhone in iTunes
in iPhone>Settings>General>Reset>Erase all content and Settings
in iTunes> Restore iPhone with previous Backup (point 1)
There is no need to reset the iPhone with iTunes and no need to manually resync apps and content.
You will have your "new" iPhone with all your apps, settings and media just like before
with only a mere 500 mb (0,5gb) of "other" memory.

I have 30 gb of audio 14 gb video and 33gb of other what is other and how do i get rid if it.

i have 30GB of audio 14GB video and 33GB of other.... how do i get rid of the other?

The Other category of your iPod consists of such things as album artwork, the iPod's software, games, files you are storing external on the device, etc. However, it's size you usually only a small fraction compared to the rest of your iPod's storage allocation (unless you are storing up large chunks of data on the iPod externally).
A large amount of other is usually a good indication of corrupt files on your iPod leftover from sailed sync operations with iTunes. The only way to reduce it to a smaller number and address this issue, is to restore the iPod to factory settings in iTunes.
B-rock

Memory used by "other" grows to 1,3GB : how do I get rid of it

Hi ,
memory used by "other" grows to 1,3GB : how do I get rid of it ? Where does ist come from ?
soms say it will reappear some days after Restoring......
Iphone 4 (no JB)
IOS 6.0.1
"32"GB Memory
26,4GB Music (selected)
0,14GB Photo
0,22GB Apps
1,3GB Other
0,44GB free!
No Mails , just 2 Calendars (not more than 30 days back),
Iphone about 1 week go after Update to 6.0.1 ( took more than 1 hour... )
Using PWsafe APP : not restoring from an older Backup might lead to loss of PW-Safe contents?
Who can help?
Thanks
P.M.

I hope Apple can fix the problem somehow ....... I just restored my Iphone again:
Pic no1 : Iphone restored with IOS before! contents are restored
Pic no2 : after all contents ( Apps & Music) have been restored
I have found another thread concerning "other" memory : but if I restore without media contents and apps my PW-Safe information might get lost ....and the problem will still return......
Any Ideas ? maybe iExplorer?
Regards
P.M.

When I login on my When I sign in to a site on my ipad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

When I sign in to a site on my iPad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

You can edit keyboard shortcuts in Settings>General>Keyboard>Shortcuts>Edit.

How do I get rid of 14gb of "other memory"

Similar Messages

Maybe you are looking for