How do I get rid of the iOS diagnostics page that won't shut off!!!

I have an iOS message that won't get off my iPad. I wanted to get diagnostics, and learned that I was out of warranty to receive it. Now I can't get rid of the ios diagnostics page that won't go away after I canceled it.  This is my first apple product, so I'm completely in the dark! ANYONE, PLEASE HELP!

Try a Reset...
Reset  ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Similar Messages

  • How can I get rid of the Introduction splash page that keeps popping up every time I open Firefox 4?

    Wen I attempt to open Firefox 4, I keep getting a splash page before I can go elsewhere. It is particularly annoying when trying to access Links on my desktop, because the splash page prevents thelink from opening.

    etresoft  a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
    http://www.etresoft.com/etrecheck
    Post the results back here
    Pete

  • I was reviewing my list of songs in my library "on my I-Pod".  I noticed that a few of the songs on the list have an Exclamation Point in front of the track, and the track won't play. How do I get rid of the Exclamation Point so that the track will play.

    I was reviewing my list of songs in my library "on my I-Pod". I noticed that a few of those tracks on the list have an Exclamation Point in front of the track and will not play. How do I get rid of the Exclamation Point so that the track will play.

    Hello enrique a.
    Instead of trying to re-invent the wheel on this one, take a look at an article such as this one to help you take care of these exclamations.  Basically, it means iTunes is unable to locate the file on your computer anymore.
    http://ipod.about.com/od/itunesproblems/qt/Fixing-The-Itunes-Exclamation-Point.h tm
    B-rock

  • I upgraded pages.  Now when I begin a new document I automatically have a text box.  How do I get rid of the text box so that it does not automatically appear.  What settings do I need to change?

    I upgraded pages.  Now when I begin a new document I automatically have a text box.  How do I get rid of the text box so that it does not automatically appear.  What settings do I need to change?

    Perhaps you are loading a template that has a text block already on it.
    You might try the blank template option and set that as your go to template in your preferences

  • In Mail, how do I get rid of the blue&white button that appears extreme right of Mail addressing pane (To)? What's its function?

    In Mail, how do I get rid of the blue&white button that appears extreme right of the addressing pane (To)? What's its function?

    malmaloney wrote:
    Thanks Meg. Trouble is it disrupts emails addresses being keyed in - that is, not from the Contacts book...
    How so?  You trying to type over it? If you keep typing the addresses drop below to next line.  I have tried and tried to make it disrupt anything without success.

  • When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

    When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

    I tried to give you this solution before, but maybe you missed it. This simple procedure will mask out all the various sponge edge-artifacts. Here it is in simple steps:
    1. Make the path shape you want to apply the sponge effect to.
    2. Highlight that path, and select Object > Path > Offset path ... choose +2 points (or whatever works for your drawing scale, to ultimately eliminate the outside line and the artifacts) -- this will make a slightly larger shape, based on the original shape.
    3. Cut the outside path (command or alt-X), select the inside path, and paste the outer path BEHIND the inner path (command or alt-B).
    4. Apply the sponge effect to the OUTER path.
    5. Highlight BOTH paths, and create a MASK (command or alt-7).
    Now you have your original shape, with sponge applied, and the outer 2 points (or whatever your Offset Path was set to), are masked out, masking out the outside line and the sponge artifacts.
    This works with any Document Raster Effect Settings dpi.

  • Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

    Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • How do I get rid of the AppleSyncNotifier.exe Error that keeps opening up everytime I start my computer?

    How do I get rid of the AppleSyncNotifier.exe message that comes on each time I start my PC?

    I'd first try uninstalling and then reinstalling your MobileMe control panel. Does that clear up the error?

  • How do I get rid of the Apple Watch ad that's just appeared as an app icon on my iPhone 6 Plus?

    Ad for Apple Watch has just appeared on my iPhone 6 Plus (iOS 8.3)--how do I get rid of it? Holding the button down to get jiggly app icons doesn't help--it doesn't have a Delete "x"; neither does it appear as an app in settings. I'm a bit unhappy about this appearing unbidden, out of the blue. If I want ads/demos, I'll download them. No call for pushing them onto my phone.  

    If I want ads/demos, I'll download them. No call for pushing them onto my phone.
    It's not an ad/demo.  It's the app needed to use the Apple Watch with your iphone.  Like all apps that are part of the iOS, it can't be deleted.

  • With Knoll Light Factory how do you get rid of the pinpoint of light that overlap obscuration layer?

    I have KLF 3.0 on AE CS6, I am trying to add a nice flare to some keyed footage of a rock star for music video...
    I set it up so it looks like a light is behind him and I want him to obscure it a bit when he moves around... However, I can't get rid of the little pinpoint of light where I have the source! My obscuration layer works properly, as he crosses it it dims the light, but the light doesn't totally disappear when he's in front of the "Source"! There's still a little pinpoint that crosses over him ruining the effect I'm going for!
    Does someone know how to get rid of that little artifact?
    I've tried tweaking all the settings to no avail...
    Thanks all!
    Aza

    Interesting. I have also experienced a similar problem involving a Knoll lens flare effect (v. 3.0) and obscuration, in this case some 3D text, backlit by a Knoll flare applied to a background layer. The flare moved across and behind the text and faded in and out either side of the text within the comp frame via keyframed opacity settings. The pinpoint of light appeared against the background at the end of the flare's path (beyond the text) on an opacity keyframe that was mistakenly adjusted to 1% instead of 0%. However after re-setting it to 0% and RAM previewing the pinpoint of light remained. Couldn't be eliminated. It was permanent and was also visible in the rendered output. The only quick way to eliminate it was to replace the background layer with a new one, add a new Knoll lens flare effect, copy and paste the keyframes from the original Knoll effect, check the opacity was indeed set to zero at the total fade-out frame and render/playback again. The pinpoint was gone. Puzzling. Not sure if this is what's happening in your case though.

  • How do I get rid of the infoatoms advertising bar that keeps popping up?

    I keep having this advertising bar pop up. I have followed all instructions to get rid of it. I have uninstalled it and selected disable ads. I have even uninstalled and reinstalled Firefox 3 times. This is only happening with Firefox. Now, I am not showing the InfoAtoms in the programs, but it is apparently still there hijacking my Firefox every time I open it. I use Firefox for a class, but I am getting very frustrated with this advertising bar. Please help me get rid of it.

    I reset Firefox to its default (see Firefox Help), and then in Control Panel of Windows uninstalled InfoAtom itself, as well as a couple of other questionable items that were installed without my knowledge at the same time. In Control Panel, it doesn't give you an option to uninstall, but you'll get to it by clicking on "Change." I tried disabling it through Firefox first, but that did not work. This way I know it's gone, gone, gone! And it really does seem to be gone.
    In case InfoAtom is still watching this thread, my feedback is thus: My problem with InfoAtoms was that it was somehow installed without my knowledge, under the radar of my anti-virus, which should have asked me if I wanted to allow changes from that company. Then I started noticing all the ads, which I dislike. Then that there needs to be a message board on how to get rid of it. Fooling with this took some real time out of my morning.

  • How to I get rid of the black outlined box that tells me everything I am clicking on?

    My friend pressed random keys on my computer, and now there is a rectangular square that is black and outlined with a white line, and whatever i put my mouse on, the black box tells me what i have clicked on. And then when I do click on something, it puts a black line around what I have clicked on, it is stressing me out and i have no idea how to get rid of it. Please help.

    Turn off VoiceOver in the Universal Access or Accessibility pane of System Preferences.
    (93733)

  • How can I get rid of the extra data page on a pdf?

    Whatever happened to the old pdf creater?  It was so easy to use!  Now I get this extra page of data and the other pages are reversed.  How can I get back to what works?

    Oops!  I use Primo PDF and Nitro, and they both produce the same extra
    page!  I'll ask them, thanks.
    RB

  • How do I get rid of Photoshop Element 11 trial that won't finish install

    It hangs at the install window (which is greyed out).  I can't uninstall it from wondows control panel because it isn't on the list to uninstal since it hasn't finished installing.  I can't uninstall LR which I downloaded yesterday (trial, too) because the "istall" is in progress.  I rebooted and the window reappears....saying it's installing but it's greyed out and nothing is happening.  I can' get rid of it!!!!  And I can't get it to install!!  I tried the whole process oer again and it won't run set up because it's already running!   I am running Windows 8

    Hi susanjrs,
    Please end the process from Task Manager.
    Follow the following basic steps :
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and redownload the software.
    Now retry installing and check.
    You might want to refer Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
    for information on how to review your installation logs

  • How do I get rid of the software update notification that keeps popping up top right of screen? I want to manage what and when I update and I just don't want some updates. I find this really annoying as all I can do to get rid of it is remind me tomorrow.

    I recently upgraded to OS mavericks and really wish I hadnt. Just more problems to fix. Little anoying bugs
    Upon sending mail I always get a pop up box saying unable to contact server so I have to click okay.
    Often I think an email has gone - only to find it stuck in drafts days later. This is extremely annoying ... mostly I have to wait around and after maybe 5 minutes check my sent box just to be sure it actually went. Even though I heard the whoosh ... doesn't seem to mean it really did go.
    Some of my photos in Iphoto just have a big exclamation mark when I try to open them up - any ideas how to fix this one.

    etresoft  a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
    http://www.etresoft.com/etrecheck
    Post the results back here
    Pete

Maybe you are looking for

  • Websense web filtering not working with 2911 with zone based firewall

    Hi, Any one ran into this issue We use websense for guest wifi but i dont see requests hitting websense server config is below class-map type inspect match-any test-1  match protocol http policy-map type inspect Wifi-test  class type inspect  test-1

  • I get vertical lines below the text when I type

    After upgrading to Firefox 4 in Windows 7 I get vertical line that appear below what I type. This is not happening with other browsers. Anybody else experiencing this or have a solution?

  • Macbook not connecting to any Internet source

    Hello, my Macbook recently, like last night, stopped connecting to the internet at all. This is a new Macbook, just purchased a few months ago, and I've never had a problem like this. At home I've got a Surfboard cable modem hooked up to a Time Capsu

  • G5 Logic Boards

    Hey guys. Long story short here. A while back, I had my logic board replaced in my G5 iMac with what turned out to be a defective logic board. After one issue after another, it's out of warranty. Around the time I purchased my iMac, a recall was put

  • Turn on Full Range Speakers and Bass Redirecti

    I have the Logitech X-530 (5.) speaker system connected to my X-Fi XtremeMusic sound card. In the Vista Speaker Setup, it says to select "full-range speakers." Am I supposed to select the speakers Also, I have Bass Redirection turned on in the X-Fi a