How do I get rid of the white border that prints on my pictures?

Lightroom 2 - Windows 7 64-bit - Nikon D700
I have just downloaded my Lightroom software to my new computer which runs Windows 7. I had lightroom on my old Vista computer and just had to change the border size to remove it from my pictures, however, for some reason it will not let me remove it anymore. When I try to adjust the border size it states it cannot be smaller than .2. Therefore, I have a white border around all my pictures I am printing. HELP! How do I get rid of this border. Thank you so much for the help.

Make sure you select a borderless papersize in the page setup. That will allow Lightroom to set the margins to zero. Otherwise it sets it to the minumum value the printer tells Lightroom it can print at at the current print size. Your printer and driver need to support borderless printing for this to work.

Similar Messages

How do I get rid of the "white banner" that reads "cut" when in Quicktime?

I've cut a piece in FCP and exported it as a QT movie....when I view it in QT, stream it on the internet, or view it on my iPod, it has a white banner that reads "cut" how do I get rid of this? And do I need to re-export it?
Thanks

while not exporting markers is one way to cure this, it's not very effective if you do want to place your chapter markers in fcp and also maybe place some compression markers. i usually place chapter markers in fcp and don't have an issue with the quicktime text track rearing it's head. do a search in the dvd sp forum, this comes up a lot. here's one thread. http://discussions.apple.com/thread.jspa?messageID=1088176&#1088176

How do i get rid of the white screen that appears?

When using my ipod the screen will suddenly turn white. I've tried restarting it and plugging into to itunes, but nothing seems to work. Is my ipod bust or is there anything else i can try to fix it?

You can work through the remaining five 5 R's of troubleshooting.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damage part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock

How do I get rid of the white noise that plays over my music?

Hey.
I got 5 CDs today and I wanted to upload them onto my iTunes to put on my iPod. But when I put in 4 of the CDs I got white noise over the top of the music making it unlistenable. But the 5th album(Double CD) worked perfectly fine. I know the problem isn't the CDs because I played them through my PS3 and they were absolutly fine. If anyone can help. Its greatly appreciated.
Thank you.
- DowellG8

Go to Edit > Preferences > General > Import Settings and check the box for error correction, and then try one of the problem CDs again.

How can I get rid of the blue border in Spry collapsible menu

How can I get rid of the blue border that displays in Safari when I click on the Spry collapsible menu? Also want to get rid of dotted border that displays in Firefox. Any suggestions? Thanks.

Please take a look here http://webaim.org/blog/plague-of-outline-0/
If, after reading the above, you still want the outline removed the add the following style rule to your document.
ul.MenuBarHorizontal a {
outline: none;

How do i get rid of the white screen on my ipod touch

How do i get rid of the white screen on my ipod touch?

Try a hard reset. If that does not work, let the battery completely drain, recharge and test.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

How do you get rid of the white part of an image?

I have some JPEG's of textures. Around the edge of the texture their is white, how do I get rid of the white so I can work with just the texture?
I tried the Luma Key filter. It worked pretty good but wanted to know what you guys do. If their is a way to get rid of the background white color without disrupting the texture image?
As always Thanks for all your help!
-marco

It is just around the outer edge.
Here is a look at the textures I downloaded:
http://www.bittbox.com/freebies/free-high-res-texture-pack-the-anatomy-of-a-real ly-old-book/
(Someone made great copies of a old book.)
Thanks for your help ThatChineesYouth.

When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

I tried to give you this solution before, but maybe you missed it. This simple procedure will mask out all the various sponge edge-artifacts. Here it is in simple steps:
1. Make the path shape you want to apply the sponge effect to.
2. Highlight that path, and select Object > Path > Offset path ... choose +2 points (or whatever works for your drawing scale, to ultimately eliminate the outside line and the artifacts) -- this will make a slightly larger shape, based on the original shape.
3. Cut the outside path (command or alt-X), select the inside path, and paste the outer path BEHIND the inner path (command or alt-B).
4. Apply the sponge effect to the OUTER path.
5. Highlight BOTH paths, and create a MASK (command or alt-7).
Now you have your original shape, with sponge applied, and the outer 2 points (or whatever your Offset Path was set to), are masked out, masking out the outside line and the sponge artifacts.
This works with any Document Raster Effect Settings dpi.

How do I get rid of the white screen of death? :(

Hi!
How do i get rid of the white screen of death?
(iPod Touch Gen 2), I don't want to get a new iPod and I heard you can fix it without going to an apple store, are there any solutions..? (:
Please help!! Thank you!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HELP! How do I get rid of the volume noise that plays when I switch from internal speakers to external speakers?

How do I get rid of the volume noise that plays when I switch from internal speakers to external speakers? I'm trying to watch something on my TV through an HDMi cable (& apple adapter) and when I go to switch the sound control in preferences from internal speakers to SONY TV, the annoying "popping" noise occurs on my TV's speakers.

Go to Edit > Preferences > General > Import Settings and check the box for error correction, and then try one of the problem CDs again.

HT5517 How do I get rid of the AirPlay instructions that are permanently on the HDTV. I wish to play music and have random photographs appear and do not want the Black AirPlay instructions on the screen

How do I get rid of the AirPlay instructions that are permanently on the HDTV.? I wish to play music through Apple TV and have my photographs that are on my computer randomly stream but the AirPlay instructions overlay these photos.

http://www.adobe.com/support/flashplayer/downloads.html
http://get.adobe.com/flashplayer/
http://www.adobe.com/products/flashplayer.html
http://www.adobe.com/shockwave/download/flash/trigger/en/3/index.html
https://get.adobe.com/flashplayer/otherversions/
https://www.adobe.com/support/flash/downloads.html
I downloaded from this adobe site. http://get.adobe.com/flashplayer/. Had a lot of issue with it. opening pages. Anyway, I have gotten rid of the extra software, inclduing Chrome.

How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP

How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How do I get rid of the pop ups that ask to store space on my computer

How do I get rid of the pop ups that ask to store space on my computer?
How do I get rid of the
pop ups that ask to store space on my computer?

Set it permanently with the Flash Player Settings Manager.

How do I get rid of the Red Thing that's obstructing my selection tools?

I have just installed Elements 12 (on a Mac using OS 10.9.5). Every time I use the selection tools I get a rectangular red window that covers the selected area. This serves no purpose that I can see and is a disruptive annoyance. How do I get rid of the $%^&&* thing???

It looks like this. MH

How do I get rid of the ugly yellow that is on Mozilla desk top now? I hate it

how do I get rid of the ugly yellow on my desk top now with mozilla it is so ugly and annyoying? Can I change the color?

See my second reply here:
*[[/questions/1038807#answer-670671]] Who took a pee on Foxfire Start page; how get rid of yellow color?
Mozilla shows snippets on the about:home page to run different campaigns and that changes regularly.
If you prefer not to see snippets on the about:home page or if there are problems with a snippet then you can set the browser.aboutHomeSnippets.updateUrl pref to an empty string on the about:config page.
Delete the storage\persistent\moz-safe-about+home folder in the Firefox profile folder with Firefox closed ("3-bar" Firefox menu button > Exit/Quit) to remove snippets stored in IndexedDB and make Firefox use a default snippet set.
You can reset the browser.aboutHomeSnippets.updateUrl pref via the right-click context menu to the default value to re-enable the snippets and make Firefox recreate the moz-safe-about+home folder.
Close and restart Firefox after changing the value of the browser.aboutHomeSnippets.updateUrl pref.

How do I get rid of the white border that prints on my pictures?

Similar Messages

Maybe you are looking for