How do I get spell check working in Mac Mail?

I'm on OS X Mountain Lion (10.8.2) and Mac Mail v 6.2
Mail Preferences are set to Check spelling "as I type" but the dashed red underline is not appearing as I misspell words.
I have been reading forums and other posts that suggested enabling "Correct spelling automatically" at a system level (System Preferences > Language & Text > Text) while leaving Mail set to "as I type" for App level preference.  Odd thing is, once I follow these steps and checkmark "Correct spelling automatically" it doesn't retain the selection - when I open the window back up the box is unselected.
Any help is appreciated!

I found this Aplle Support thread, tried it and it worked!.  Good luck @AngeredDan
https://discussions.apple.com/thread/4353496?start=0&tstart=0

Similar Messages

  • How do I get spell check on Beta e mail?

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/789519''
    I am so disgusted with this site! I am trying to ask how to get spell check and you ask for confimation of my address but do not tell me how to do it! This is taking far too much time and I can't send a mail until I know the answer. This Beta site is not user friendly and freezes up every time I use it! I am really frustrated .

    see also post https://support.mozilla.com/en-US/questions/789519#answer-143532

  • How do I get spell check back on after firefox was updated? Thanks

    How do I get spell check back on after Firefox was updated?

    Not all locales come with a dictionary installed due to licensing reasons.<br />
    If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected.
    You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.<br />
    You can open the "Add Dictionaries" link to install a dictionary if you do not have one.<br />
    Make sure that [X] "Check Spelling" in the right-click context menu has a tick.<br />
    You can enable or disable spell checking globally:
    * Tools > Options > Advanced : General: Browsing: "Check my spelling as I type"
    See also:
    * https://support.mozilla.com/kb/Using+the+spell+checker
    You can look here for dictionaries:
    * https://addons.mozilla.org/firefox/language-tools/

  • How do we get spell check on Beta? It isn't obvious like before

    I sent a question before but it asked me to confirm my address and didn't show me how to confirm. My problem is I do not know how to get spell check on an e mail. This has been so time consuming because I also can't get to anything once I click. Always getting the hourglass and can't get through.

    see also post https://support.mozilla.com/en-US/questions/789519#answer-143532

  • How Do I Get Spell Checker to Flag Words with Numbers?

    Hi,
    I cannot find any articles on this, so sorry if it's already been answered elsewhere.
    I sometimes accidentally hit a number key when typing words like "you"--so that it becomes "y9ou". The Firefox built-in spell checker does not flag this as a misspelling.
    In other programs there is a check box to allow this or not, but I cannot find one for Firefox. I do not use words with numbers very often, except something like W2, so I would prefer those get flagged instead of ones that are wrong like y9ou or w3ere that I make frequently.
    Any help on this?
    Thanks!
    Don :)

    Hi, Again,
    Thanks for the info. And for a quick reply. ;-)
    I checked my current cop0y of LibreOffice (I replaced OpenOffice.org with it several months ago). LibreOffice uses Hunspell as well. I had not checked the boxes to check words with numbers or all-caps as I had previously done in OpenOffice.org, so for all this time I have been thinking it would flag errors in those when it wasn't. Must have made LOTS of mistakes I didn't catch in that time. ;-(
    In LibreOffice, go to Tools => Options => Languages => Writing Aids. You can choose to enable spelling and grammar checking (not sure what the grammar checker oes, since it was already enabled but I have never seen any evidence of it). The below that is a section of checkboxes where you can specify what is and is not flagged by the spell checker. I checked the words with numbers and capital letters choices. So now it will catch all the acronyms I haven't added to the spell checker dictionary.
    I was looking for the same sort of choice in Firefox but didn't see it. Perhaps there is an API in Hnnspell the Firefox developers can use to add this choice as a checkbox, the way it is in LibreOffice.
    I realize this may be perceived as a low priority, but I would certainly appreciate seeing it in a future update of Firefox. At least making this post helped me get the settings i wanted in my word processor.
    Take care and God bless.
    Don :)

  • Spell check in iOS Mac mail

    I don't know if I'm in the correct area?  I have the basic iMac Desktop.  If I'm the wrong
    area maybe you could show me where I'm supposed to be?
    My q is re: Mail/Spell Check?  I feel I'm not doing it correctly bec the corrections(if any?)
    are not very good.  I recently switched from Microsoft to Mac.  The Microsoft was very
    good but I can't believe Microsoft is better? 
    Peggy222

    Hi Peggy,
    Here's the iMac area...
    https://discussions.apple.com/community/desktop_computers/imac_intel
    And there's forums fot differ OSX versions, but anyway, what is it doing or not doing?

  • How do you get SSL to work on Mac OS X Server 10.5.8?

    Hi, I have created a SSL certificate (twice with the server admin tools and once with the openssl command) and I get this in the log of the apache web service:
    [error] Init: Pass phrase incorrect
    I have searched but aside from changing the httpd.conf file to not use:
    SSLPassPhraseDialog exec:/etc/apache2/getsslpassphrase
    and instead echo a generic passphrase, I don't know what to do. I have not tried this btw. It seems the wrong answer, even if it works.
    I have also seen to uncheck the performance cache option in the sites, option pane, but 10.5 does not have this and I don't know if it exists in a config file somewhere.
    Does anyone know how to get SSL working on the mac leopard server? it's a stock, advanced install.
    Thank you for any help.

    Easiest way is to not use a passphrase on the cert. It isn't required and can be left blank. That way apache doesn't need to know it and will use the certificate.
    Of course, this means you need to manage access to your certificates, but that should be the case anyway.

  • How do I get icloud to work on mac osx v10.6?

    My computer, MAC OSX v10.6.8 is not showing an icloud icon in Preferences.  It has a mobil me icon but when clicked it says it has been moved to icloud.  My ipad, iphone and Mac are not syncing.  Help!

    You need Core2Duo or better (i3/i5/i7) processor and 2 GB memory (but some would recommend 4 GB) ...
    Apple Menu > About This Mac  ... this is mine
    As to "should I be scared?" ...
    You sound like you mtch the first/major criteria ... you *need* it to synch with your mobile devices.  Others are just "following the crowd" and have little other reason.
    You should not be scared.  Tens (hundreds?) of thousands currently run Lion without issue.  And this forum helps with the issues you have.
    You really need to have a good "clone" of your system beofre you start in case the process goes badly (rarely does it, but you want to be able to recover and start again).  And there is a new set of "how to recover" in Lion becase it uses a "hidden partition" called "Recovery Partition" instead of disks ... but that is all just stuff to learn, not to be afraid of.
    First, check the hardware, then post back if you wish.

  • Getting Yahoo to work with Mac Mail?

    I need to get my @btinternet.com email running through mail but can't seem to set it up properly. I've filled in the details according to the help pane on Yahoo mail:
    http://help.yahoo.com/l/uk/bt/mail/yahoomail/pop/pop-14.html
    On Mail, I go into my preferences pane / accounts - click on the + button. It then says 'mail cannot send your password securely...' so I have to set up manually. I then fill in the details from the above link, continue, select 'authentication - Password (from the drop down menu) / continue. Fill in the outgoing mail server (mail.btinternet.com) and tick the authentication box and fill in my user name & password below. I then click continue but every time I get to that step it then quits and says 'mail quit unexpectedly'
    Anybody got any ideas?

    Ok - I've figured out part of the problem - I was still signed into my account in Safari. BUT, i now have another problem. The account is set up but next to the account on the main Mail screen it has a little triangle with a exclamation mark inside. I clicked on it and it said 'There may be a problem with the mail server or network. Verify the settings for account “btinternet.com” or try again. The server returned the error: The connection to the server “mail.btinternet.com” on port 995 timed out.'
    I'm not sure if this is relevant, but my ISP is talk talk and I originally got the btinternet.com addy when I was a BT customer.
    Any ideas?
    Message was edited by: Jay Robinson2

  • Kichat: How do I get iChat 3 working ? Upgrade hints, FAQ

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    How do I get iChat 3 working ? Upgrade hints:FAQ
    Trouble Shooting Revisited
    Ok We will start with loading Tiger and iChat version 3.0
    From Panther
    There are or were serveral Add-ons and applications avaiblable to Panther users of iChat that are not compatible with iChat 3.
    These following need to be deleted.
    iCAR - An Add-on that posts an Auto response Away message (produces a 1 fps result in a Video chat)
    Virex for Panther - An Anti Virus app avialable to @mac account users (Produces the 1 fsp problem)
    iChatUSBCam for Panther/iChat2.x - A Add-on utility for using iSight or USB cam with iChat2.x (Incompatible with Tiger/iChat 3)
    iProfile - An Add-on for producing a profile on the AIM server that ichat 2.x could not do (not proven to be a problem but now not needed).
    A clean install of Tiger (not Archive and Install) produces the best results.
    But any install should also check these Tiger settings.
    First, UPGRADE to 10.4.3 as this gets past many Connection issues that became apparent with the basic Tiger (10.4) and iChat 3.0 It updates iChat to version 3.1
    Check Settings
    Don't be complacent that you have not set anything different.
    There are several new things in Tiger that may trip you up.
    These are worth looking at:
    Mac Firewall. Now includes the ability to Block all UDP traffic in the Advanced button (System Preferences > Sharing >Firewall tab then the Advanced Button).
    Also can now open UDP protocol for ports where as the Panther one only did TCP (Check any old Panther settings you Added to the presets).
    The ports should be:
    TCP -5190
    UDP -5060, 5190, 5678, 16384-16403
    There are more ports for Bonjour 5297, 5298, 5353 UDP and 5298 TCP and Jabber, 5220, 5222, 5223 on TCP)
    (Table View see 7th Sept)
    QuickTime. This has a change in the name of the Connection Speed tab to Streaming (System Preferences > QuickTime) Check this is set to be equal to your connection speed (the download one if this is faster). See Apple Doc 301641 Dated 9th November 2005.
    Date & Time. Not conclusively involved but worth eliminating. Set a Network Server and the correct Time Zone.
    Apple Remote Desktop. If this is active in System Preferences > Sharing > Services tab it causes problems for iChat.
    Next, test the actual speed you are getting from your ISP.
    http://www.dslreports.com/stest
    There is a table here of the speeds you need:
    http://docs.info.apple.com/article.html?artnum=301050
    The one you get linked to in the Help menu is wrong.
    Other Known Problems
    There are several other applications that iChat 3 does not seem to like.
    folding@home This is a application that uses spare processor time to help find protein chains for a University.
    PostgreSQL This is a data base application that can be reset to allow more processor time for iChat. See here http://www.murraywilliams.com/blog/archives/000046.html
    Lotus Notes Some people have reported problems with this.
    Make sure any Add-on Video cards or input PCI cards have up to date Firmware
    IF you are still having problems I would do Routine Maintenance Tasks as laid out here.
    Lastly, some routers/modems are SIP aware and give different results in iChat 3 compared to iChat 2.
    This is due to the Operating System changing (like a new computer connecting to the modem) rather than iChat.
    See My web pages: page4 at the SIP Text in a Box section.
    Also for the above try some housekeeping particularly if you do not keep your Computer on 24/7 Gulliver, "kmosx3: Mac OS X 10.3/10.4: System maintenance"
    Ralph
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    i think apple needs to keep up with the jones here, so far i read at LOGIC PRO FORUMS many saying cubase and pro tools left logic in the dust, 1 year ago already, sad, but true
    in anycase, trye starting one app before the other to see which combination works., other wise i think more apps will fall out of sync with old logic pro

  • Kisight: How do I get my iSight working ?  Trouble Shooting an iSight Camera.  (Version 3)

    Replacement for the second draft of this Thread   (To be removed if Published as Tip)
    kisight: How do I get my iSight working ?
    Trouble Shooting an iSight Camera.  (Version 3)
    Hi,     On many subjects Apple has Articles and Documents that can help.
    In some case they are written by an Engineer or similar and can miss the mark for the average user.
    In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
    This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
    It lists steps and processes to go through for both Internal iSights and External ones.
    However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
    The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ?  which were written several years ago and predate the Apple Article, being aimed at the External iSight.  They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
    External First.  For Internal iSights Start at 2b)  (you will need to adjust some options/steps as the Internal is USB)
    Steps
    1) Pre Purchase
    If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on  Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
    2) Does it work ?
    a) First of all Plug it in.  It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
    Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
    It will then go through some checks as the OS powers it up and checks it's firmware.
    Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
    There is no ON switch as such.  It does have an iris mechanism that can be controlled by the User.  The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
    b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
    See this Users Tip for more applications Or this page for yet more.
    Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions  (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
    3) If it does Not Work
    a) Check Cables/leads.  Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
    Try another 6 pin to 6 pin firewire cable.
    b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing.  (Also see d below if you have an 800 FIreWIre Computer)
    c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire.  (Use USB for Internal Cameras)
    If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
    d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
    If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point.  This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
    If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
    Other Items
    Audio.
    The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
    Firmware.
    The System Profiler as detailed above should tell you the Firmware the iSight has.  The current version is 1.0.3 and was updated in Panther.  (Essentially it is an Audio compatibility update but does seem to help in other situations)
    If your computer is running Panther (10.2.x) then use this Updater
    If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
    If an iSight is Plugged in on the Computer when you do an  OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
    Focusing on the External iSight
    Essentially the External iSight is self or Autofocusing.
    If in doubt then try better lighting and strong colours as opposes to light or pastels.
    (All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
    EZ Jim has these more specific recommendations for piece of mind.
      Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
    Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
    Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
      Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
    This Users Tip by Ian Bickerstaff  can give you clues for any application really  "Look  and sound good in iChat"
    Other Info and Links
    iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
    Apple's iSight Firewire Connectivity FAQs
    Apple's iSight Service FAQs
    If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
    1:13 PM      Saturday; October 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

    Replacement for the second draft of this Thread   (To be removed if Published as Tip)
    kisight: How do I get my iSight working ?
    Trouble Shooting an iSight Camera.  (Version 3)
    Hi,     On many subjects Apple has Articles and Documents that can help.
    In some case they are written by an Engineer or similar and can miss the mark for the average user.
    In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
    This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
    It lists steps and processes to go through for both Internal iSights and External ones.
    However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
    The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ?  which were written several years ago and predate the Apple Article, being aimed at the External iSight.  They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
    External First.  For Internal iSights Start at 2b)  (you will need to adjust some options/steps as the Internal is USB)
    Steps
    1) Pre Purchase
    If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on  Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
    2) Does it work ?
    a) First of all Plug it in.  It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
    Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
    It will then go through some checks as the OS powers it up and checks it's firmware.
    Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
    There is no ON switch as such.  It does have an iris mechanism that can be controlled by the User.  The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
    b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
    See this Users Tip for more applications Or this page for yet more.
    Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions  (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
    3) If it does Not Work
    a) Check Cables/leads.  Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
    Try another 6 pin to 6 pin firewire cable.
    b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing.  (Also see d below if you have an 800 FIreWIre Computer)
    c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire.  (Use USB for Internal Cameras)
    If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
    d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
    If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point.  This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
    If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
    Other Items
    Audio.
    The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
    Firmware.
    The System Profiler as detailed above should tell you the Firmware the iSight has.  The current version is 1.0.3 and was updated in Panther.  (Essentially it is an Audio compatibility update but does seem to help in other situations)
    If your computer is running Panther (10.2.x) then use this Updater
    If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
    If an iSight is Plugged in on the Computer when you do an  OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
    Focusing on the External iSight
    Essentially the External iSight is self or Autofocusing.
    If in doubt then try better lighting and strong colours as opposes to light or pastels.
    (All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
    EZ Jim has these more specific recommendations for piece of mind.
      Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
    Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
    Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
      Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
    This Users Tip by Ian Bickerstaff  can give you clues for any application really  "Look  and sound good in iChat"
    Other Info and Links
    iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
    Apple's iSight Firewire Connectivity FAQs
    Apple's iSight Service FAQs
    If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
    1:13 PM      Saturday; October 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • Kisight:- How do I get my iSight working ?

    kisight:- How do I get my iSight working ?
    Trouble Shooting an iSight Camera.
    Hi,
    On many subjects Apple has Articles and Documents that can help.
    In some case they are written by an Engineer or similar and can miss the mark for the average user.
    In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
    This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
    It lists steps and processes to go through for both Internal iSights and External ones.
    However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
    The info here is a reworking itself of two pages at Ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
    External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
    Steps
    1) Pre Purchase
    If buying an External iSight you should if you an get to see it in action.
    Apple no longer sells the External iSight so you will be buying it second hand.
    If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
    2) Does it work ?
    a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
    Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
    It will then go through some checks as the OS powers it up and checks it's firmware.
    Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
    There is no ON switch as such. It does have an iris mechanism that can be controlled by the User.
    The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
    b) Pick an Application to see the picture the iSight produces.
    iChat is one, Photobooth is another, iMovie (Version 4 or above), Comic Book if bundled on your Mac are yet more.
    See this Users Tip for more applications Or this page for yet more.
    Photo Booth is probably the simplest as it has no Preferences to choose a camera and the OS and Photo Booth will default to the External Camera if one is plugged in before the application is started.
    If you see your self or what the camera is pointing at, It Works !!
    3) If it does Not Work
    a) Check Cables/leads.
    Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
    Try another 6 pin to 6 pin firewire cable.
    b) Unplug the cable form any other Firewire device and give the iSight it's Own Firewire port/socket on the Mac (exclude issues with other Firewire devices).
    Use a firewire port on your Mac that you know works.
    c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)
    Open the Reveal Triangles to see the list and go to Hardware > Firewire. (Use USB for Internal Cameras)
    If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
    If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point.
    This Article may also be of help (number HT1317 What to do if your computer won't recognize a FireWire or USB device).
    If you have not resolved things at this stage it s going to be time for an Engineer with Apple credentials.
    Other Items
    Audio.
    The External Camera has two mics inside.
    The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.
    The same applies to any other Mic, even the Internal one on laptops and some other Macs.
    Firmware.
    The System Profiler as detailed above should tell you the Firmware the iSight has.
    The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
    If your computer is running Panther (10.2.x) then use this Updater
    If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSght Updater and run the updater found there.
    If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
    Focusing on the External iSight
    Essentially the External iSight is self or Autofocusing.
    If in doubt then try better lighting and strong colours as opposes to light or pastels.
    EZ Jim has these more specific recommendations for piece of mind.
    Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
    Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
    Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
    Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
    This Users Tip by Ian Bickerstaff can give you clues for any application really
    "Look and sound good in iChat"
    Other Info and Links
    iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
    Apple's iSight Firewire Connectivity FAQs
    Apple's iSight Service FAQs
    If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
    First Draft.
    Comment please.
    9:59 PM Friday; May 15, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

    Replacement for the second draft of this Thread   (To be removed if Published as Tip)
    kisight: How do I get my iSight working ?
    Trouble Shooting an iSight Camera.  (Version 3)
    Hi,     On many subjects Apple has Articles and Documents that can help.
    In some case they are written by an Engineer or similar and can miss the mark for the average user.
    In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
    This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
    It lists steps and processes to go through for both Internal iSights and External ones.
    However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
    The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ?  which were written several years ago and predate the Apple Article, being aimed at the External iSight.  They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
    External First.  For Internal iSights Start at 2b)  (you will need to adjust some options/steps as the Internal is USB)
    Steps
    1) Pre Purchase
    If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on  Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
    2) Does it work ?
    a) First of all Plug it in.  It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
    Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
    It will then go through some checks as the OS powers it up and checks it's firmware.
    Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
    There is no ON switch as such.  It does have an iris mechanism that can be controlled by the User.  The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
    b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
    See this Users Tip for more applications Or this page for yet more.
    Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions  (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
    3) If it does Not Work
    a) Check Cables/leads.  Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
    Try another 6 pin to 6 pin firewire cable.
    b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing.  (Also see d below if you have an 800 FIreWIre Computer)
    c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire.  (Use USB for Internal Cameras)
    If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
    d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
    If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point.  This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
    If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
    Other Items
    Audio.
    The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
    Firmware.
    The System Profiler as detailed above should tell you the Firmware the iSight has.  The current version is 1.0.3 and was updated in Panther.  (Essentially it is an Audio compatibility update but does seem to help in other situations)
    If your computer is running Panther (10.2.x) then use this Updater
    If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
    If an iSight is Plugged in on the Computer when you do an  OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
    Focusing on the External iSight
    Essentially the External iSight is self or Autofocusing.
    If in doubt then try better lighting and strong colours as opposes to light or pastels.
    (All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
    EZ Jim has these more specific recommendations for piece of mind.
      Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
    Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
    Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
      Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
    This Users Tip by Ian Bickerstaff  can give you clues for any application really  "Look  and sound good in iChat"
    Other Info and Links
    iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
    Apple's iSight Firewire Connectivity FAQs
    Apple's iSight Service FAQs
    If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
    1:13 PM      Saturday; October 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Kichat: How do I get iChat 3 working ?

    An Update to http://discussions.apple.com/thread.jspa?threadID=278760 Line To be removed on Posting if Accepted
    How do I get iChat 3 working ? - Upgrade hints:FAQ
    Trouble Shooting
    This Post deals with Updating iChat 2 in Panther to iChat 3 in Tiger
    NOTE:- What is said here was found out at the time Tiger was released and the info may not be transferable to any other OS Upgrade such as Tiger to Leopard
    Ok We will start with loading Tiger and iChat version 3.0
    From Panther
    There are or were several Add-ons and applications available to Panther users of iChat that are not compatible with iChat 3.
    These following need to be deleted. I am not supplying links here as you don't need them.
    iCAR - An Add-on that posts an Auto response Away message (produces a 1 fps result in a Video chat)
    Virex for Panther - An Anti Virus app avialable to @mac account users (Produces the 1 fsp problem)
    iChatUSBCam for Panther/iChat2.x - A Add-on utility for using iSight or USB cam with iChat2.x (Incompatible with Tiger/iChat 3)
    iProfile - An Add-on for producing a profile on the AIM server that ichat 2.x could not do (not proven to be a problem but now not needed).
    A clean install of Tiger (not Archive and Install) produces the best results.
    But any install should also check these Tiger settings.
    First, UPDATE to 10.4.3 as this gets past many Connection issues that became apparent with the basic Tiger (10.4) and iChat 3.0 It updates iChat to version 3.1 (it also mentions the Virex issue)
    Check Settings
    Don't be complacent that you have not set anything different.
    There are several new things in Tiger that may trip you up.
    These are worth looking at:
    Mac Firewall. Now includes the ability to Block all UDP traffic in the Advanced button (System Preferences > Sharing >Firewall tab then the Advanced Button).
    Also can now open UDP protocol for ports where as the Panther one only did TCP (Check any old Panther settings you Added to the presets).
    The ports should be:
    TCP -5190
    UDP -5060, 5190, 5678, 16384-16403
    There are more ports for Bonjour 5297, 5298, 5353 UDP and 5298 TCP and Jabber, 5220, 5222, 5223 on TCP)
    See this Apple Doc Formerly Article: 93208.
    That info coverts into a table like this
    QuickTime. This has a change in the name of the Connection Speed tab to Streaming (System Preferences > QuickTime) Check this is set to be equal to your connection speed (the download one if this is faster - *Preferably 1.5Mbps* ). See Apple Doc 301641 Dated 9th November 2005.
    Date & Time. Not conclusively involved but worth eliminating. Set a Network Server and the correct Time Zone.
    Also check it matches any similar setting in your Modem and router
    Apple Remote Desktop. If this is active in System Preferences > Sharing > Services tab it causes problems for iChat.
    Next, test the actual speed you are getting from your ISP.
    http://www.dslreports.com/stest A range of Speed Test sites can be found here
    There is a table here of the speeds you need:
    iChat 3/Tiger (OS 10.4) Speed requirements
    The one you get linked to in the Help menu is wrong.
    Other Known Problems
    There are several other applications that iChat 3 does not seem to like.
    folding@home This is a application that uses spare processor time to help find protein chains for a University.
    PostgreSQL This is a data base application that can be reset to allow more processor time for iChat. See here http://www.murraywilliams.com/blog/archives/000046.html
    Lotus Notes Some people have reported problems with this.
    Make sure any Add-on Video cards or input PCI cards have up to date Firmware
    IF you are still having problems I would do Gulliver's Routine Maintenance Tasks as laid out here.
    Lastly, some routers/modems are SIP aware and give different results in iChat 3 compared to iChat 2.
    This is due to the Operating System changing (like a new computer connecting to the modem) rather than iChat.
    See My web pages: page4 at the SIP Text in a Box section. This has moved on somewhat since Tiger came out with Thomson-Alcatel brining out newer firmware version that are mentioned later in that section.
    Also for the above try some housekeeping particularly if you do not keep your Computer on 24/7 Gulliver's, "kmosx3: Mac OS X 10.3/10.4: System maintenance"
    Updated 21st June 2008
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    8:35 PM Saturday; June 21, 2008

    i think apple needs to keep up with the jones here, so far i read at LOGIC PRO FORUMS many saying cubase and pro tools left logic in the dust, 1 year ago already, sad, but true
    in anycase, trye starting one app before the other to see which combination works., other wise i think more apps will fall out of sync with old logic pro

  • My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
    So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

Maybe you are looking for

  • Oracle 11g :SELECT query blocked..??

    Hi Experts, could you please explain why the below SQL query is blocked? SELECT 1 FROM DUAL is blocking the SQL statement on GTTAPPUSR@gttccuatcriba04 ( SID=469 ) blocked SQL -> DELETE FROM GTTDB.PURCHASE_ENTRY_ID=:1 SELECT 1 FROM DUAL is blocking th

  • To use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

    I'm considering using Apple TV to connect to a projector in a church hall which does not have any internet access. I intend to use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access re

  • Time Machine loses backups after a full restore.

    Greetings (Possibly due to parallels, my Imac was running so slow or hanging. As a result,) I ran a full system restore from Time Machine. It worked well. Then I thought I would try a better restore date and used that. After this successful restore,

  • Deleting Planned depreciation.

    Dear Experts, Is it possible to close the FI-AA year without postin the planned depreciation? The issue is as under: the acqusition value of asset is 30000, chargable @ 4.75% depreciation. depreciation were posted upto 11th period, then we change the

  • Mac OS X 10.4.5 update & Epson RX600

    since updating to 10.4.5 my Epson Stylus Photo RX600 only prints intermitently. I'm getting a lot of communications errors and Print Utility's crashed a few times. Does anyone know of any issues? I've also tried installing gutenprint 5rc2 which hasn'